ASME B89.1.9-2002

量块

Gage Blocks Errata: 12/2003

适用范围：This Standard specifies the most important design and metrological characteristics of gage blocks with a rectangular or square cross-section and a nominal length ln ranging from 0.5 mm to 1 000 mm for ...

DIN EN ISO 8674-2001

六角螺母,I型,米制细牙螺纹.产品等级A和B

Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999); German version EN ISO 8674:2000

适用范围：The document specifies dimensional and performance requirements for hexagon nuts, style 2, with metric fine pitch, product grades A and B.#,,#

ISO/TS 17444-2-2013

Electronic fee collection -- Charging performance -- Part 2: Examination Framework

发布日期：2013-11-01  实施日期：2013-11-01

ISO 14278-2002

航空和航天.十字型错位肋或非肋内驱动头的量规

Aerospace -- Gauges, for internal offset cruciform ribbed or unribbed drives -- Metric series

适用范围：ISO 14278 specifies the dimensions of metric gauges which check internal offset cruciform drives, ribbed or unribbed, used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm.

发布日期：2002-06-01  实施日期：2002-06-01

BS EN ISO 8674-2012

带公制细牙螺纹的六角高螺母(类型2) 产品等级A和B

Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B

发布日期：2013-01-31  实施日期：2013-01-31

BS EN ISO 10673-2009

小型、标准型和大型系列螺钉和垫圈组件用平垫圈.A级产品

Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A

适用范围：The International Standard specifies the characteristics of plain steel washers, small, normal and large series,of product grade A for metric screw and washer assemblies in accordance with ISO 10644.

实施日期：2010-02-28

DIN 2232-2008

Geometrical product specifications (GPS) - Gap gauges "GO" with forged gauging member over 3 mm up to 100 mm nominal size

实施日期：2008-07-01

DIN 7500-1-2009

Thread rolling screws for ISO metric thread - Part 1: Technical specifications for case hardened and tempered screws

发布日期：2009-06-01  实施日期：2009-06-01

ASME B29.24-2002

桥式起重机用载重滚子链

Roller Load Chains for Overhead Hoists

适用范围：This Standard covers specialized roller chains that are designed specifically as load chains for use in overhead hoists.

实施日期：2002-09-26

NF E03-051-2013

ISO general purpose metric screw threads - Tolerances - Part 1 : principles and basic data

ISO 14275-2002

航空和航天.十字型错位肋内驱动头.米制系列

Aerospace -- Drives, internal, offset cruciform, ribbed -- Metric series

适用范围：ISO 14275 specifies the dimensions of metric internal, offset cruciform, ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm.

发布日期：2002-06-01  实施日期：2002-06-01

BS EN ISO 10642-2004

六角内孔沉头螺钉

Hexagon socket countersunk head screws

适用范围：ISO 10642:2004 specifies the characteristics of hexagon socket countersunk head screws with threads from M3 up to and including M20, with product grade A and property classes 8.8, 10.9 and 12.9.

ASME B18.5.2.2M-1982

Metric Round Head Square Neck Bolts

ISO 4032-1999

六角螺母 1型-- 产品等级 A和B 级

Hexagon nuts, style 1 -- Product grades A and B

发布日期：1999-08-01  实施日期：1999-08-01

ISO 14531-2-2004

塑料管和管件 气体燃料输送用交联聚乙烯(PE-X)管系 米制系列 规格 第2部分:热熔接头管件

Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing

适用范围：ISO 14531-2:2004 specifies the physical properties and mechanical performance requirements of crosslinked polyethylene (PE-X) and polyethylene (PE) socket, saddle and spigot fittings for the connection...

发布日期：2004-07-01  实施日期：2004-07-01

ISO 657-11-1980

热轧型钢; 第11部分:斜缘槽钢(米制系列);尺寸和截面特性

Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties

适用范围：Gives the designation of sloping flange channel sections in an example and the dimensions and sectional properties in a figure and a table.

发布日期：1980-09-01  实施日期：1980-09-01

ISO 8641-2008

航空航天 最高工作温度高于425℃的自锁螺母 采购规范

Aerospace -- Self-locking nuts with maximum operating temperature greater than 425 degrees C -- Procurement specification

适用范围：ISO 8641:2008 specifies the required characteristics for metric self-locking nuts, with MJ thread, for use in aerospace construction at a maximum temperature greater than 425 °C. ISO 8641:2008 is appli...

发布日期：2008-09-01  实施日期：2008-09-01

DIN EN 3788-2004

航空和航天 管接头8°30' 护帽

Aerospace series - Pipe coupling 8<Grad>30<Minute> - Protective caps

DIN 8141-1-1993

米制ISO螺纹.铝铸合金件配合用粗牙和细牙螺纹;标准直径5～16mm;标准尺寸,公差和尺寸极限

ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes

适用范围：This document specifies sizes, tolerances and limits of sizes of threads for interference fits in aluminium cast alloys.#,,#

NF L53-202-010-2009

Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010 : terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 oC for metric and inch stud series - Product standard.