BS 5395-1-2010

Stairs. Part 1:Code of practice for the design of stairs with straight flights and winders

实施日期：2010-02-28

BS EN 2286-1990

具有自润滑衬套的铝合金法兰轴套筒规范.尺寸和负荷

Buchsen mit Flansch aus Aluminium-Legierung mit selbstschmierender Beschichtung. Masse und Belastungen Bushes Flanged,Aluminium Alloy with Self-Lubricating Liner Dimensions and Loads Bagues. epaulement...

适用范围：Characteristics of bushes for shafts and housings.

实施日期：1990-01-01

BS EN 2942-1998

耐热镍基合金NI-PH2801(铬镍铁合金X750)镀银螺旋形线圈自锁式螺纹嵌镶件

Draht-Gewindeeinsaetze,selbstsichernd,aus hochwarmfester Nickelbasislegierung NI-PH2801 (Inconel X750),versilbert Inserts,Screw Thread,Helical Coil,Self-Locking,in Heat Resisting Nickel Base Alloy NI-P...

适用范围：This standard specifies the characteristics of self-locking, helical coil, screw thread inserts in NI-PH2801, silver plated , for aerospace applications. Maximum test temperature: 550 ℃

实施日期：1998-08-15

BS EN ISO 4287-1998+A1-2009

Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters

实施日期：2000-07-15

BS EN ISO 5436-2-2001

几何产品规范(GPS) 表面结构:轮廓方法 测量标准 第2部分:软件测量标准 校正13802:2002年3月19日

Geometrical product specifications (GPS). Surface texture. Profile method. Measurement standards. Software measurement standards

适用范围：Geometric surfaces, Surface texture, Profile measurement, Profile, Computer software, Calibration, Verification

实施日期：2002-03-12

EN ISO 8502-11-2006

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 11:Field method for the turbidimetric determination of water-soluble sulfate ISO 8502-11:2006

实施日期：2006-04-01

BS 2765-1969

温度检测元件与相应护套的尺寸规范

Dimensions of Temperature Detecting Elements and Corresponding Pockets

适用范围：Screwed and flanged thermometer pockets. Design for applications of moderate severity, pocket material for most applications.

实施日期：1969-01-01

EN ISO 12944-4-1998

Paints and Varnishes. Corrosion Protection of Steel Structures by Protective Paint Systems. Part 4:Types of Surface and Surface Preparation Corrected 1998-06-18

实施日期：1998-05-01

BS EN 13997-2003

灌溉设备.灌溉系统中使用的连接和控制附件.技术特性和试验

Bewaesserungsverfahren. Verbindungs-und Steuerzubehoer fuer den Einsatz in Bewaesserungssystemen. Technische Eigenschaften und Pruefung Irrigation techniques Connection and control accessories for use ...

适用范围：This standard describes the technical characteristics and requirements of hydraulic connection and control accessories to ensure a sufficient mechanical resistance for practical use, and specifies the ...

实施日期：2003-11-20

BS 1983-1-1969

机床与轻便电动工具用卡盘规范.第1部分:刀具夹紧卡盘

Spannfutter fuer Werkzeugmaschinen und tragbare kraftangetriebene Werkzeuge. Spezifikation. Werkzeug-Spannfutter Specification for Chucks for machine tools and portable power tools. Part 1:Tool-holding...

适用范围：Specifies requirements for mounting and accuracy of tool-holding chucks for use in machine tools and portable power tools. Five types of chuck are covered: guided three-jaw light duty, guided three-jaw...

实施日期：1969-03-21

ISO 4287 CORR 1-1998

Geometrical product specifications (gps). Surface texture:Profile method. Terms,definitions and surface texture parameters technical corrigendum 1 spécification géométrique des produits (gps). état de surface:Méthode du profil. Termes,définitions et param

实施日期：1998-06-15

DIN EN ISO 8503-5-2005

涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第5部分: 测定表面轮廓的复制带方法

Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determina...

适用范围：This part of ISO 8503 describes a field method for measuring the surface profile produced by any of the abrasive blast-cleaning procedures given in ISO 8504-2.

BS EN 4424-2006

Luft-und Raumfahrt. Einstellbare Gabelkoepfe,einfach,mit Gewindeschaft mit Einschraubtiefe 1,5. Gewindedurchmesseraus Titanlegierungen. Masse und Belastungen Rod-ends,adjustable,single fork and threaded shank with engagement:1,5. thread diameter in titanium alloys Dimensions and loads Serie aerospatiale. Embouts reglables a chape simple et a tige filetee a implantation:1,5. diametre filetage en alliages de titane. Dimensions et charges

实施日期：2006-06-30

BS EN 25827-1992

点焊规范.电极支撑和夹紧装置

Specification for spot welding. Electrode back-ups and clamps

适用范围：Specifies dimensions and characteristics.

NF A50-431-1995

Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications.

ISO 5436-2-2001

产品几何量技术规范(GPS) 表面结构:轮廓法 测量标准 第2节:软件测量标准

Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 2: Software measurement standards

发布日期：2001-12-01  实施日期：2001-12-01

GB/T 6060.1-1997

表面粗糙度比较样块 铸造表面

Roughness comparison specimens Cast surfaces

适用范围：本标准规定了铸造金属及合金表面粗糙度比较样块的制造方法、表面特征、样块分类和租糙度参数值及其评定方法。　　本标准适用于铸造表面粗糙度比较样块。该样块用于与同他表征的铸造金属及合金和铸造方法相同的，并经过适当方...

发布日期：1997-12-30  实施日期：1998-07-01

ASTM B946-2006(2010)

粉末冶金（P/M）产品表面光洁度的试验方法

Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products

适用范围：<p>The surface finish of a component may be critical for certain applications, affecting properties such as wear resistance, fatigue strength, and coefficient of friction.</p> <p>Surface finish may als...

实施日期：2006-06-01

GB/T 13288.5-2009

涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法

Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determinati...

适用范围：GB/T 13288的本部分规定了按ISO 8504-2给定的磨料喷射清理方法清理后钢材表面粗糙度的现场测定法。本方法用复制带和其配套测量仪对涂装前表面粗糙度进行现场测量。　　本部分适用于给定规格(或厚度)的复制带测定相应范围内...

发布日期：2009-03-09  实施日期：2009-11-01

NF A49-300-5-2010

Steel tubes for precision applications - Technical delivery conditions - Part 5 : welded and cold sized square and rectangular tubes.