NF E05-015/A1-2009

Geometrical Product Specifications (GPS) - Surface texture : profile method - Terms, definitions and surface texture parameters - Amendment 1 : peak count number.

DIN EN ISO 13565-1-1998

几何产品规范(GPS);表面结构剖面方法.表面有层次功能性能.第1部分:过滤和通用测量条件

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); ...

发布日期：1998-04-01  实施日期：1998-04-01

EN ISO 8503-5-2004

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates. Part 5:Replica tape method for the determination of the surface profile (ISO 8503-5:2003)

实施日期：2004-12-01

BS EN 3543-1997

钝化耐热及耐腐蚀钢制短螺纹紧公差标准柄翼型十字槽100°标准埋头螺钉.等级:1100 MPa(室温)/425℃

100 Senk-Passschrauben mit Fluegelkreuzschiltz,kurzes Gewinde,aus korrosionsbestaendigem und hochwarmfestem Stahl,passiviert. Klasse:1100 MPa (bei Raumtemperatur)/425°C Screws,100 Degree Countersunk No...

适用范围：This standard specifies the characteristics of screws, 100°countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivate...

实施日期：1997-06-15

BS EN 3289-1994

飞机机架滚动轴承.耐腐蚀的双排自位式钢制滚珠轴承.直径系列2.尺寸和荷载

Flugwerklager. Zweireihige Pendelkugellager aus korrosionsbestaendigem Stahl. Durchmesserreihen 2. Masse und Belastungen Bearings,Airframe Rolling-Double Row Self-Aligning Ball Bearings in Corrosion Re...

适用范围：This standard specifies the characteristics of double row self-aligning ball bearings in corrosion resisting steel of diameter series 2 <up1)> designed to withstand only slow rotations, oscillations an...

实施日期：1994-01-01

DIN EN ISO 21534-2009

无源外科植入物 关节置换植入物 特殊要求

Non-active surgical implants - Joint replacement implants - Particular requirements

适用范围：This International Standard specifies particular requirements for total and partial joint replacement implants,artificial ligaments and bone cement, hereafter referred to as implants. For the purposes ...

实施日期：2009-08-01

BS EN 22340-1992

无头U形销

Clevis pins without head

适用范围：Specifies characteristics of metric pins having nominal diameter from 3 mm to 100 mm inclusive.

BS A 328-2-1999

Hilfsantriebe und Montageflansche (metrische Reihe). Masse Accessory Drives and Mounting Flanges (Metric Sizes)-Part 2:Dimensions Aeronautique et espace. Fixation et entrainement des equipements (serie metrique). Dimensions ISO 8399-2:1998;

实施日期：1999-02-15

BS 2574-2-1994

下肢矫正法.第2部分:下肢矫正用髋部,膝和踝关节规范

Lower limb orthoses. Specification for hip, knee and ankle joints for lower limb orthoses

适用范围：Specifies requirements for orthotic joints, except those for trauma cases.

实施日期：1994-12-15

DIN EN 1766-2000

混凝土结构的保护和维修用的产品和系统.试验方法.试验用的标准混凝土

Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2000

适用范围：The document contains specifications about the composition, the properties and the preparation of reference concretes, which are used for methods for testing the performance requirements of products an...

BS ISO 23519-2010

Sintermetalle,ausgenommen Hartmetalle. Messung der Oberfl?chenrauheit Sintered metal materials,excluding hardmetals. Measurement of surface roughness Matériaux métalliques frittés,. l'exclusion des métaux-durs. Mesurage de la rugosit de surface

实施日期：2010-06-30

NF E63-502-2005

冲床和挤压工具.磨损垫片.第1部分:冲床工具、量规和夹具用靡损的垫片

Tools for pressing and moulding - Machined plates - Part 1 : machined plates for press tools.

BS EN 3013-1996

镀银耐热镍基合金HI-P101HT(沃斯帕洛尹合金)自锁双六角头螺母.等级:1210 MPa(室温)/730℃

Zwoelfkantmuttern,selbstsichernd,aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy),versilbert. Klasse:1 210 MPa (bei Raumtemperatur)/730°C Nuts,Bihexagonal,Self-Locking,in Heat Resisting Nic...

适用范围：This standard specifies the characteristics of self-locking bihexagonal nuts in NI-P101HT, silver plated, for aerospace applications. Classification : 1 210 MPa <up1)> / 730 ℃ <up2)> note:1) Correspon...

实施日期：1996-01-01

BS EN 3291-1994

飞机机架滚动轴承.镀镉单排自位式钢制滚动轴承.直径系列3和4.尺寸和荷载

Flugwerklager. Einreihige Tonnenlager aus Stahl,verkadmet Durchmesserreihen 3 und 4. Masse und Belastungen Bearings,Airframe Rolling-Single Row Self-Aligning Roller Bearings in Steel,Cadmium Plated-Dia...

适用范围：This standard specifies the characteristics of single row self-aligning roller bearings in steel <up1)>, cadmium plated, of diameter series 3 and 4 <up2)> designed to withstand only slow rotations, osc...

实施日期：1994-01-01

BS 5L 100-2011+A1-2013

可锻造的铝和铝合金检验、测试和验收程序(含增补1)

Procedure for inspection,testing and acceptance of wrought aluminium and aluminium alloys

发布日期：2013-12-01  实施日期：2013-12-01

BS EN ISO 4527-2003

金属涂层 自身催化(无电镀)镍-磷合金涂层 规范和试验方法

Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods

适用范围：This International Standard specifies the requirements and test methods for autocatalytic nickel-phosphorus alloy coatings applied from aqueous solutions on to metallic substrates. This International S...

BS EN 2353-1989

防腐钢控制转筒规范.尺寸和荷载

Spannschlossmuttern aus korrosionsbestaendigem Stahl. Masse und Belastungen Turnbarrels,Control Cable in Corrosion Resisting Steel. Dimensions and Loads Douilles de tendeurs en acier resistant. la corr...

适用范围：This standard specifies the characteristics of turnbarrels in corrosion resis-ting steel intended for aircraft control cables.

实施日期：1989-01-01

BS EN 3053-1994

飞机用轴承.钢制单列球面轴承.尺寸和负载

Flugwerklager. Einreihige Tonnenlager aus Stahl. Masse und Belastungen Bearings,Airframe Rolling-Single Row Self-Aligning Roller Bearings in Steel-Dimensions and Loads (S) Roulements pour structures d'...

适用范围：This standard specifies the characteristics of single row self-aligning roller bearings in steel <up1)> designed to withstand only slow rotations, oscillations and/or swivelling under load. They are in...

实施日期：1994-01-01

BS EN 3009-1998

镀银耐热镍基合金NI-P100HT(铬镍铁合金718)制薄柄长螺纹六角头螺栓.等级:1275 MPa(室温)/650℃

Sechskantschrauben,Duennschaft,langes Gewinde,aus hochwarmfester Nickelbasislegierung NI-P100HT (Inconel 718),versilbert. Klasse. 1275 MPa (bei Raumtemperatur)/650°C Bolts,Hexagon Head,Relieved Shank,L...

适用范围：This standard specifies the characteristics of hexagon headed bolts with relieved shank and long thread, in NI-P100HT, silver plated, for aerospace applications. Classification: 1 275 MPa <up1)> / 650 ...

实施日期：1998-08-15

BS ISO 3547-1-2006

滑动轴承.外衬套.尺寸

Plain bearings. Wrapped bushes. Dimensions

适用范围：This part of ISO 3547 specifies the dimensions and designations of cylindrical and flanged wrapped bushes made of solid and multi-layer bearing material for plain bearing applications.