DIN 8632-1-1989

机床 磨削长度1600mm以下卧轴矩台平面磨床; 验收条件

Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions

适用范围：This standard describes, with reference to DIN 8601, both geometrical and practical tests on general purpose and normal accuracy surface grinding machines with reciprocating table and with horizontal g...

JB/T 8487.2-2011

活塞车床 第2部分：精度检验

Piston lathes-Part 2:Testing of the accuracy

适用范围：本标准规定了活塞车床几何精度和工作精度的要求及检验方法。本标准适用于活塞加工直径为50mm～150mm的精加工活塞车床。

发布日期：2011-05-18  实施日期：2011-08-01

BS 6200-3.11.1-1991

Probenahme und Analyse von Eisen,Stahl und anderen Eisenwerkstoffen. Analyseverfahren. Bestimmung von Kobalt. Spektrophotometrisches Verfahren fuer Stahl und Gusseisen Sampling and analysis of iron,steel and other ferrous metals. Part 3:Methods of analysis. Section 3.11 Determination of cobalt. Subsection 3.11.1 Steel and cast iron:spectrophotometric method Echantillonnage et analyse des fontes,des aciers et autres metaux ferreux. Methodes d'analyse. Dosage du cobalt. Acier et fonte:methode spec

实施日期：1991-01-01

DIN EN 14202-2004

挡板和百叶窗 管状和方形电机的适用性 要求和试验方法

Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods

适用范围：This document specifies the requirements and tests to be performed for electric tubular or square drives without driven part, to be applied to power operated blinds and shutters, in addition to their c...

DIN 5032-7-1985

光测量. 照明强度和照明密度的分级

Photometry; classification of illuminance meters and luminance meters

BS 5086-4-1985

黄油分析.第4部分:盐含量的测定方法(参考法)

Butteranalyse. Verfahren zur Bestimmung des Salzgehaltes (Vergleichsverfahren) Analysis of Butter Part 4:Method for Determination of Salt Content (Reference Method) L'analyse du beurre. Methode de dete...

适用范围：Destruction of organic matter by digestion with nitric acid, followed by argentometric titration.

实施日期：1985-01-01

DIN 43856-2-1997

电表.第2部分:按IEC 1354-95的计费装置的辅助终端的标记

Electricity meters - Part 2: Marking of auxiliary terminals for tariff devices according to IEC-Report 61354:1995

适用范围：The document deals with the marking of auxiliary terminals for tariff devices of a.c. electricity meters with induction or static measurement elements.

NF V18-210-2012

Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65% nitric acid and 30% hydrogen peroxide).

BS 5202-1-2000

烟叶和烟草制品的化学分析方法.可溶于盐酸的硅残留物的测定

Verfahren zur chemischen Analyse von Tabak und Tabakprodukten. Bestimmung der in Salzsaeure unloeslichen Silikatrueckstaende Methods for Chemical Analysis of Tobacco and Tobacco Products-Part 1:Determi...

适用范围：This International Standard specifies a method for the determination of the percentage of hydrochloric-acid-insoluble extraneous silica particles, especially particles of sand, in tobacco (whole leaf, ...

实施日期：2000-04-15

DIN 8131-2007

Automatic gravimetric filling instruments - Metrological and technical requirements - Tests (OIML R 61-1:2004)

实施日期：2007-11-01

BS EN 14260-2003

煤热解衍生物.煤焦油和沥青基粘结剂和相关产品.铺路焦油.特性和试验方法

Derivate der Kohlenpyrolyse. Bindemittel aus Steinkohlenteer und Steinkohlenteerpech und verwandte Produkte. Direkt destillierter Teer. Anforderungen und Pruefverfahren Derivatives from coal pyrolysis ...

适用范围：This European Standard specifies the methods of test required to determine the characteristics for "road tars" and their warning to use for the industrial purposes. Depending on the required applicatio...

实施日期：2003-10-31

DIN 8651-1990

机床的验收条件 双柱偏心压力机

Machine tools; straight sided power presses; acceptance conditions

适用范围：The standard describes, with reference to DIN 8601, geometrical tests for straight sided mechanical presses up to 2500 kN nominal capacity and gives the corresponding tolerances.

GB/T 16462.1-2007

数控车床和车削中心检验条件 第1部分：卧式机床几何精度检验

Test conditions for numerically controlled turning machines and turning centers - Part 1: Geometric test for machines with a horizontal workholding spindle

适用范围：GB/T 16462的本部分规定了床身上最回转直径至1000mm，线性轴线行程至2000mm的普通精度等级的数控卧式车床和车削中心的几何精度检验。Z轴行程大于2000mm的该类机床也可参照使用。　 本部分还规定了各项几何精度检验的允差。...

发布日期：2007-07-26  实施日期：2007-12-01

BS 6522-1984

绝缘油的水饱和百分比的测定方法

Verfahren zur Bestimmung der Wasserbesaettigung (in %) von Isolieroel Determination of Percentage Water Saturation of Insulating Oil Methode de determination du pourcentage de saturation en eau des hui...

适用范围：Describes a method of test, based on the measurement of dew-point, for the determination of percentage water saturation of insulating oil at temperatures up to 60<deg>C.

实施日期：1984-08-31

EN 60216-4-2-2000

Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius IEC 60216-4-2:2000

ISO 4703-2001

带双拴的磨面机的测试条件 滑道磨光机 精确度测试

Test conditions for surface grinding machines with two columns -- Machines for grinding slideways -- Testing of the accuracy

发布日期：2001-08-01  实施日期：2001-08-01

CNS 4408-1978

自攻螺钉之加工精度及公差

Finish and tolerance for tapping screws

JB/T 5733-1991

木工锯条焊接机 精度

实施日期：1992-07-01

BS EN 12549-1999+A1-2008

Akustik. Ger?uschmessverfahren für Eintreibger?te. Verfahren der Genauigkeitsklasse 2 Acoustics-Noise test code for fastener driving tools-Engineering method Acoustique. Code d'essai acoustique pour les machines. enfoncer les fixations. Méthode d'expertise AMD:April 30,2009

实施日期：1999-11-15

DIN 51619-2004

矿物油碳氢化合物检验 液化气成分测定 考虑成分≤0.1 %(m/m)1.3-丁二烯的气体色谱分析

Testing of mineral oil hydrocarbons - Determination of the composition of liquid petroleum gases - Gas chromatographic analysis under special consideration of 1,3-butadiene <kleiner => 0,1 % (m/m)

适用范围：The gas chromatographic method is used for the determination of the composition of liquid gases under special consideration of 1,3-butadiene with mas fraction <kleiner => 0,1 %.