DIN 4983-2004

矩形杆刀夹和转位刀架 标记结构

Tool holders with rectangular shank and cartridges for indexable inserts - Presentation of the designation

适用范围：The specifications of this standard apply to the designation of standardized and non-standardized tool holders with rectangular shank and of cartridges intended for the mounting of indexable inserts ma...

GB/T 973-1976

十字槽扁圆头螺钉

Screws,cross recessed,oval head

发布日期：1976-10-13  实施日期：1977-10-01

NF E25-801-2-2005

High-strength structural bolting assemblies for preloading - Part 2 : suitability test for preloading.

DIN EN ISO 2320-2009

有效力矩型钢螺母 机械和工作性能

Prevailing torque type steel nuts - Mechanical and performance properties

适用范围：This International Standard specifies the mechanical and performance properties for prevailing torque typesteel nuts when tested at an ambient temperature range of +10 ~C to +35 ~C. It includes a singl...

实施日期：2009-03-01

BS EN ISO 8752-2009

弹簧型开口直销.重负荷槽头式

Spannstifte (-hülsen). Geschlitzt,schwere Ausführung Spring-type straight pins. Slotted,heavy duty Goupilles cylindriques creuses,dites goupilles élastiques Série épaisse

适用范围：This International Standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter, d1, fro...

实施日期：2009-07-31

SN 0030-1992

出口紧固件检验规程

Rule for inspection of fasteners for export

实施日期：1993-01-01

BS EN 3379-1996

镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制中长螺纹紧公差柄双六角头增高螺栓.等级:1210 MPa(室温)/730℃

Zwoelfkant-Passschrauben,mittlere Gewindelaenge,aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy),fuer hohe Muttern. Klasse:1210 MPa (bei Raumtemperatur)/730°C Bolts,Double Hexagon Head,Clos...

适用范围：This standard specifies the characteristics of double hexagon headed bolts with close tolerance shank and medium length thread, in NI-P101HT, for increased height nuts, for aerospace applications. Clas...

实施日期：1996-01-01

NF L22-535-1975

埋头自锁紧系留螺母 单耳单孔 米制螺纹

Self-locking anchor nuts, countersunk type, single lug with one hole. Sim thread (rech.).

实施日期：1975-06-01

ASTM A490-2010a

经热处理的最小抗拉强度为150 ksi的合金钢结构螺栓规格

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

适用范围：<p id="s00002">1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi.</p> <p id="s00006">1.2 These bolts ...

NF R19-110-1-1994

Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 1 : commercial vehicles and combinations of vehicles, semi-trailers excluded.

CNS 3933-1976

六角承孔头螺钉检验法

Method of Test for Hexagon Socket Head Cap Screws (Metric)

发布日期：1976-06-01  实施日期：1976-06-01

NF L53-201-045-2006

Aerospace series - Electrical contacts used in elements of connection - Part 045 : contacts, electrical, female, type A, double crimping, class T - Product standard.

CNS 341-1975

自行车(脚踏车)螺纹标准

Screw Threads for Bicycles

发布日期：1953-07-29  实施日期：1975-12-12

GB/T 6563-2014

六角头自挤螺钉

Hexagon head thread rolling screws

适用范围：本标准规定了螺纹规格为 M2~M12 的六角头自挤螺钉。 本标准适用于六角头自挤螺钉。

发布日期：2014-06-24  实施日期：2015-03-01

DIN V 65900-17-2001

航空航天系列.O形环槽.O形环槽设计准则.基本计算

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

适用范围：The document provides: the design criteria recommended for the housing definition for o-rings as specified in ISO 3601-1; a calculation method to formulate dimensions of the housing for which the near ...

NF E51-362-1985

细纹固定部件装配的操作气动工具 反作用力矩和力矩脉冲的测定

Hand-held pneumatic assembly tools for installing threaded fasteners. Reaction torque and torque impulse measurements.

实施日期：1985-12-01

DIN EN 3723-1996

航空和航天.耐热钢FE-PA92HT,MOS2镀层自锁六角螺母.等级:1100MPa(大气温度)/425℃

Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 <Grad>C; German version EN 3723:...

ISO 9140-1998

航空航天--普通或开槽螺母--试验方法

Aerospace -- Nuts, plain or slotted (castellated) -- Test methods

发布日期：1998-12-01  实施日期：1998-12-01

GB/T 62.1-2004

蝶形螺母 圆翼

Wing nuts-Round wing

适用范围：本部分规定了螺纹规格为M2～M24 、保证扭矩为Ⅰ级(适用于钢、铁或不锈钢)或Ⅱ级(适用于黄铜)，用钢、可锻铸铁、不锈钢或黄铜制成的两翼为半圆形的A型或B型蝶形螺母。

发布日期：2004-02-10  实施日期：2004-08-01

DIN 65247-1989

航空和宇航 MJ螺纹平头冠状螺母,耐腐蚀钢制,等级:110MPa/425 摄氏度

Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 <Grad>C

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, surface treatment, marking and technical specifications.#,,#