DIN 158-2-1997

附有圆柱形内螺纹的米制锥形外螺纹.第2部分:量规系统、量规使用、量规尺寸的计算和标记

Metric external taper screw thread and mating internal parallel screw threads - Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features

适用范围：The document defines a gauging system on threads according to DIN 158-1.

DIN 65438-1993

航空和航天用双六角头螺栓

Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 <Grad>C

适用范围：The document contains specifications pertinent to manufacture and use such as dimensions and designation, material, thread, surface treatment, marking and technical specifications.

DIN 382-2009

Hexagonal die-nuts

实施日期：2009-12-01

ISO 2857-1973

ISO 米制螺纹公差为 4H至8H和4G至6G 的粗牙和细牙的磨牙丝锥 螺纹部分的制造公差

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches -- Manufacturing tolerances on the threaded portion

适用范围：Is valid for the short taps specified in ISO 529 as well as for any other kind of ground thread taps with the same diameters and pitches. The internal threads produced with those taps are conventionall...

发布日期：1973-12-01  实施日期：1973-12-01

DIN EN ISO 10513-2013

通用扭矩型(全金属六角螺母),2型,米制细牙螺纹.性能类别8,10和12

Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012); German version EN ISO 10513:2012

发布日期：2013-08-01  实施日期：2013-05-01

EN ISO 10513-2012

有效力矩型全金属六角螺母 2型-米制细牙螺纹 性能等级8、10和12级

Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8,10 and 12

实施日期：2012-12-01

NF E48-065-3-2000

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B).

ISO 965-1-1998

ISO一般用途米制螺纹 公差 第1部分:原则和基本数据

ISO general-purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data

发布日期：1998-12-01  实施日期：1998-12-01

DIN 13-9-1999

ISO米制螺纹.螺距4mm；螺纹直径40～300mm的细牙螺纹.尺寸

ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm

适用范围：The document specifies nominal sizes.

BS 811-1950

自行车螺纹(B.S.C.螺纹,以前称为C.E.I.螺纹)规范

Cycle-Gewinde (B.S.C.) (frueher als C.E.I.-Gewinde bekannt). Spezifikation Specification Cycle threads Filetages pour cycles (B.S.C.) (anciennement appeles filetages C.E.I.). Specification AMD:July 195...

适用范围：Form and dimensions for bolts, nuts, spokes, nipples and special applications. Table of limits and tolerances for threads, for bolts and nuts and for special applications.

实施日期：1950-05-24

EN 4499-2009

Aerospace series. Screws,100 Degree countersunk reduced head,offset cruciform recess,close tolerance normal shank,short thread,in titanium alloy,anodized,with aluminium pigmented coating. Classification:1 100 MPa (at ambient temperature) / 315 Degree C

实施日期：2009-02-01

EN ISO 8673-2000

Hexagon Nuts,Style 1,with Metric Fine Pitch Thread. Product Grades A and B Supersedes EN 28673:1991;ISO 8673:1999

实施日期：2000-11-01

BS EN ISO 21670-2003

法兰六角焊接螺母

Hexagon weld nuts with flange

适用范围：This International Standard specifies characteristics for hexagon weld nuts with flange, with sizes M5 to M16 (coarse thread) and M12 to M16 (fine thread), of product grade A. Weld nuts conforming to t...

实施日期：2003-11-05

NF E48-065-2-2000

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2 : stud ends with elastomeric sealing (type E).

DIN 3852-1-2002

管螺纹连接用螺纹管堵、螺纹孔和管件.第1部分:米制细牙螺旋塞.结构尺寸

Studs ends,ports,for fittings,valves - Part 1: Plug screw with metric fine pitch thread - General outlay of types

适用范围：The document applies to dimensions and designations of stud ends for fittings, valves and plug screws and the corresponding ports. This part gives requirements for types with metric fine pitch thread.#...

EN 4501-2006

Aerospace series. Bolts,normal hexagonal head,close tolerance normal shank,short thread,in titanium alloy,anodized,with aluminium pigmented coating,metric series. Classification:1 100 MPa (at ambient temperature) / 315 °C

实施日期：2006-06-01

DIN 609-1995

具有长螺纹圆柱端的六角配合螺栓

Hexagon fits bolts with long thread

适用范围：The document contains dimensional and technical requirements of hexagon fit bolts with long thread and specifies their designation.

ISO 8673-2012

Hexagon regular nuts (style 1) with metric fine pitch thread -- Product grades A and B

发布日期：2012-12-01  实施日期：2012-12-01

BS 2A 59-1962

Specification for cadmium-plated steel hexagonal-headed bolts (B.A. and B.S.F. threads) with close tolerance shanks for aircraft

BS 93-2008

尺寸为OB.A.至16B.A.的英国协会(B.A.)螺纹与公差规范

British Association (B.A.) screw threads. Requirements

适用范围：This British Standard specifies limits of sizes, and tolerances, for singlestart parallel screw threads of British Association (B.A.) form. It is notapplicable to screw threads associated with interfer...

实施日期：2008-09-30