IEC/TR 62627-05-2013

光纤互连装置和无源元件 第05部分:单模(SM)和多模(MM)连接器光学性能污染和划痕影响的调查

Fibre optic interconnecting devices and passive components. Part 05:Investigation on impact of contamination and scratches on optical performance of single-mode (SM) and multimode (MM) connectors

适用范围：IEC/TR 62627-05:2013(E) which is a technical report, summarizes the extensive industry research on development of cleanliness specifications for single-mode (SM) and multimode (MM) connectors. Keywords...

发布日期：2013-10-15  实施日期：2013-10-15

IEC 61280-2-11-2006

纤维光学通信子系统试验程序 第2-11部分:数字系统 用振幅柱状图评定来测定用于光信号质量监测的平均Q因子

Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring

适用范围：This part of IEC 61280 defines the averaged Q-factor and provides a procedure to measure it by using amplitude histogram parameters such as the standard deviation and average level.

发布日期：2006-01-17  实施日期：2006-01-17

BS EN 50411-2-2008

LWL-Splei?kassetten und-Muffen für die Anwendung in LWL-Kommunikationssystemen. Produktnormen. Allgemeines und Leitfaden für LWL-Muffen,geschützte Mikrorohrmuffen und Mikrorohrverbinder Fibre organisers and closures to be used in optical fibre communication systems-Product specifications-Part 2:General and guidance for optical fibre cable joint closures,protected microduct closures,and microduct connectors Organiseurs et bo?tiers de fibres destinés. être utilisés dans les systèmes de communicati

实施日期：2008-09-30

IEC/TR 62316-2007

OTDR后反射轨迹的说明用指南

Guidance for the interpretation of OTDR backscattering traces

适用范围：This Technical Report provides guidelines for the interpretation of backscattering traces, as obtained by an optical time domain reflectometer (OTDR).A full description of the test measurement procedur...

实施日期：2007-01-01

EN 61280-2-1-2010

Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement

JIS C5979-1998

F10型单芯光纤连接器

F10 Type connectors for optical fiber cables

适用范围：この規格は，JIS C 5962に基づき，バぞヨネット締結構造及び外径2.0 mmの整列フェルール構造を備えたプラグ(接栓)ーアダプタープラグ及びプラグーレセプタクル結合方式のF10形単心光ファイ，ぐコネクタ(以下,光コネクタという。)について規定する。

EN 61300-2-27-1997

Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-27: Tests - Dust - Laminar Flow IEC 61300-2-27: 1995

BS EN 2591-503-2001

光电连接元件 试验方法 第503部分:压接后的触点变形

Luft-und Raumfahrt. Elektrische und optische Verbindungselemente. Pruefverfahren. Kontaktverformung nach dem Crimpen Elements of Electrical and Optical Connection-Test Methods-Part 503:Contact Deformat...

适用范围：To be read in conjunction with EN 2591-100

实施日期：2001-12-14

DIN EN 61753-091-3-2005

纤维光学互连器件和无源元件性能标准 第091-3部分:U类带连接纤维的单模光导循环器 非受控环境

Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment

适用范围：This standard contains the minimum requirements and severities which a fibre optic circulator shall satisfy in order to be categorised as meeting the requirements of circulator devices used in uncontro...

实施日期：2005-04-01

DIN EN 61754-4-1-2003

纤维光学连接器接口 第4-1部分:SC型连接器门类 SC-PC接口的简易插座

Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptacle SC-PC connector interfaces

适用范围：This part of IEC 61754 defines the standard interface dimensions of simplified receptacles for the type SC family of connectors.

实施日期：2003-09-01

NF C93-867-8-4-2007

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-4 : LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U.

BS EN 61269-1-1997

光纤端件.总规范

Kontakteinsaetze fuer Lichtwellenleiter. Fachgrundspezifikation Fibre Optic Terminus Sets Part 1:Generic Specification Jeux d'embouts pour fibres optiques. Specification generique IEC 1269-1:1994;

适用范围：This part of IEC 1269 applies to fibre optic terminus sets for all types, sizes and structures of fibres and cables. It includes: - terminus set requirements; - quality assessment procedures.

实施日期：1997-06-15

IEC 61755-3-8-2009

纤维光学互连器件和无源器件 纤维光学连接器光学接口 第3-8部分:单模光纤用直径为2.5mm和1.25mm、用钛包覆光纤的圆柱形8度成角APC复合套管光学接口

Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Part 3-8:Optical interface,2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite f...

发布日期：2009-01-12  实施日期：2009-01-01

NF C93-816-1995

Blank detail specification : connectors for optical fibres and cables. Environmental category ii.

IEC/TR 61282-11-2012

光纤通信系统设计指南 第11部分:多模发射条件

Fibre optic communication system design guides. Part 11:Multimode launch conditions

适用范围：IEC/TR 61282-11:2012(E) is intended to show the background of encircled flux for the characterisation of multimode launch conditions. This includes the selection of the encircled flux and the definitio...

实施日期：2012-05-01

BS EN 62148-11-2009

光纤有源元件和设备 包装和接口标准 第11部分:14针调制器集成激光二极管发射机

Fibre optic active components and devices. Package and interface standards. 14-pin active device modules

适用范围：This part of IEC 62148 covers physical interface specification for modulator integrated laserdiode transmitters.The object of this standard is to adequately specify the physical requirements of an opti...

实施日期：2010-01-31

DIN EN 50377-8-9-2008

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U

实施日期：2008-03-01

BS EN 60332-3-22-2009

Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A

实施日期：2010-01-31

NF L52-400-514-2009

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514 : cable twist bend.

GB/T 8403.4-1987

光纤机械性能试验方法 恒定弯曲应变试验

Measuring methods for mechanical characteristics of optical fibres--Constant bending strain prooftest