FZ/T 54057-2012

聚对苯二甲酸丁二醇酯（PBT）预取向丝

Polybutylene terephthalate partially oriented yarns

适用范围：本标准规定了聚对苯二甲酸丁二醇酯（PBT）预取向丝的术语和定义、产品标识、技术要求、试验方法、检验规则、标志、包装、运输和贮存的要求。本标准适用于总线密度为30dtex～600dtex，单丝线密度1.25dtex～10.00dtex、圆形截面、本色及...

发布日期：2012-12-28  实施日期：2013-06-01

NF L15-660-1978

铝合金异形扁管

Torpedo-shaped tubes in aluminium alloys.

NF L12-610-1968

冷拉无缝圆钢管 航空和宇航工业选用

Selection of cold drawn seamless steel tubes of circular cross. Section for the aerospace industry.

EN 14970-2006

Textiles. Knitted fabrics. Determination of stitch length and yarn linear density in weft knitted fabrics

实施日期：2006-01-01

NF L22-186-1976

有BNAE十字槽锥顶扁头螺钉 国际单位米制螺纹

Mushroom head screws with B.N.A.E. Cross recess and cone point. Sim thread.

ISO 10554-2009

聚酰胺纤维绳 双重编织结构

Polyamide fibre ropes -- Double braid construction

适用范围：ISO 10554:2009 specifies requirements for double braided ropes and for higher-strength double braided ropes made of polyamide and gives rules for their designation.

发布日期：2009-12-01  实施日期：2009-12-01

FZ/T 50009.1-1998

三维卷曲涤纶短纤维密度试验方法--单纤维长度测量法

Testing method for linear density of three-dimensioal crimp polyester staple fibres-Measure at length of single fibres

实施日期：1999-07-01

NF G36-051-2010

一般用途纤维绳--一定物质和机械性能的测定

Fibre ropes - Determination of certain physical and mechanical properties.

DIN EN ISO 1346-2005

绳索 单丝和多丝(PP2)聚丙烯裂膜和聚丙烯高韧性多丝(PP3) 三股、四股和八股绳索

Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes (ISO 1346:2004)

ISO 2649-1974

Wool -- Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester

发布日期：1974-12-01  实施日期：1974-12-01

NF L22-137-1984

带锁紧孔六角头螺钉短螺纹

Bolt, hexagonal head, with locking hole, short thread.

实施日期：1984-09-01

ASTM D2591-2007(2013)

Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)

实施日期：2007-01-01

ISO 10572-2009

混合聚烯烃纤维绳

Mixed polyolefin fibre ropes

适用范围：ISO 10572:2009 specifies requirements for 3-strand hawser-laid, 4-strand shroud-laid, 8-strand braided and 12-strand braided ropes made of mixed polyolefin fibres, and gives rules for their designation...

发布日期：2009-12-01  实施日期：2009-12-01

NF L22-272-1966

航空用ISO 螺纹螺栓螺母 AICMA 十字槽全螺纹半圆头螺钉

Aircraft fasteners. Pan head screws, fully threaded, with A.I.C.M.A. Cross recess.

NF L22-184-1976

有BNAE十字槽120 °埋头螺钉 国际单位米制螺纹

120 degrees countersunk head screws with B.N.A.E. Cross recess. Sim thread.

NF L15-322-1972

铝合金拉制六角形棒材 尺寸和公差

Hexagon drawn bars in aluminium alloys.

实施日期：1972-09-01

EN ISO 1127-1996

Stainless Steel Tubes. Dimensions,Tolerances and Conventional Masses Per Unit Length ISO 1127:1992

实施日期：1996-04-01

BS 1161-1977

结构用铝合金型材规范

Spezifikation fuer Profile aus Alulegierung fuer Bauzwecke Aluminium Alloy Sections for Structural Purposes Specification des profiles en alliages d'aluminium de construction AMD 4357:August 31,1983

适用范围：Dimensions, geometrical properties and mass per unit length of aluminium alloy sections. Covers angle, channel, lipped channel, I, tee and bulb tee sections.

实施日期：1977-02-28

NF L22-136-1984

通用六角头螺钉短螺纹

Bolt, hexagonal head, current use, short thread.

实施日期：1984-09-01

NF L15-340-1972

铝合金样压制扁材

Extruded flat bars in aluminium alloys.

实施日期：1972-09-01