ISO 6524-1992

滑动轴承--薄壁轴瓦--周长检验

Plain bearings -- Thin-walled half-bearings -- Checking of peripheral length

适用范围：Specifies two methods of checking the measuring equipment and gauging tools necessary for measuring the peripheral length (or nip or crush) of thin-walled half-bearings that are flexible and, in the fr...

发布日期：1992-09-01  实施日期：1992-09-01

GB/T 6320-2008

杠杆齿轮比较仪

Mechanical dial comparators

适用范围：本标准规定了杠杆齿轮比较仪的术语和定义、型式与基本参数、要求、试验方法、检验方法、标志与包装等。　　本标准适用于分度值为0.0005mm、0.001mm、0.002mm、0.005mm和0.01mm的杠杆齿轮比较仪(以下简称“比较仪”)。

发布日期：2008-02-28  实施日期：2008-08-01

BS EN ISO 10360-1-2001

几何产品规范(GPS) 坐标测量机(CMM)的验收和复检试验 第1部分:词汇

Geometrische Produktspezifikation (GPS). Annahmepruefung und Bestaetigungspruefung fuer Koordinatenmessgeraete (KMG). Begriffe Geometrical Product Specifications (GPS)-Acceptance and Reverification Tes...

适用范围：This part of ISO 10360 establishes a vocabulary for coordinate measuring machines (CMM), and their acceptance and reverification tests.

实施日期：2001-10-01

BS EN 1603-1997

建筑物用的隔热产品.在恒定常规实验室条件下尺寸稳定性的测定.(23℃/50%相对湿度)

Waermedaemmstoffe fuer das Bauwesen. Bestimmung der Dimensionsstabilitaet im Normalklima (23°C/50% relative Luftfeuchte) Thermal Insulating Products for Building Applications-Determination of Dimension...

适用范围：This European Standard specifies the equipment and procedures to evaluate irreversible dimensional changes of test specimens and full size products with time under constant normal laboratory conditions...

实施日期：1997-06-15

BS EN 60244-8-1995

无线电发射机测量方法.第8部分:用做测试电视发射机和差转机的残留边带解调器的特性

Messverfahren fuer Funksender. Uebertragungs-eigenschaften von Restseitenband-Demodulatoren zur Prufung von Fernsehsendern und Umsetzern Methods of Measurement for Radio Transmitters Part 8:Performance...

适用范围：Intended for use for type tests and acceptance or factory tests To be read in conjunction with BS EN 60244-5:1995

实施日期：1995-01-01

GB 11948-1989

陶瓷砖平整度、边直度和直角度的测定方法

实施日期：1990-06-30

JIS R2654-1975

可铸轻质耐火材料线性变化率试验方法

Method of test for permanent linear change on light weight castable refractories

适用范围：この規格は。軽量キャスタプル耐火物の焼成による線変化率試験方法について規定する。

NF E05-040-85-2013

Geometrical product specifications (GPS) - Filtration - Part 85 : morphological area filters : segmentation

BS EN 15415-2-2012

Solid recovered fuels. Determination of particle size distribution. Maximum projected length method (manual) for large dimension particles

发布日期：2012-04-30 

DIN 2250-1-2008

Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter

实施日期：2008-10-01

NF E11-058-2012

Geometrical product specifications (GPS) - dimensional measuring equipment : electronic digital-indicator gauge - Design and metrological characteristics.

EN 324-1-1993

人造板 板尺寸的测定 第1部分: 厚度、宽度和长度的测定

Wood-Based Panels. Determination of Dimensions of Boards Part 1:Determination of Thickness,Width and Length

实施日期：1993-01-01

DIN EN ISO 10360-2-2010

产品几何量技术规范(GPS) 坐标测量机(CMM)的验收检测和复检检测 第2部分:用于测量线性尺寸的坐标测量机(CMM)

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions

适用范围：This part of ISO 10360 specifies the acceptance tests for verfying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer.

实施日期：2010-06-01

DIN 878-2006

产品几何量技术规范(GPS) 机械百分表 计量性能极限

Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for metrological characteristics

适用范围：This standard applies to mechanical gauges as in DIN EN ISO 463 having scale intervals of 0,01 mm and a measuring range of 0,4 mm; 0,8 mm; 3 mm; 5 mm and 10 mm. It specifies the numerical values for li...

实施日期：2006-06-01

DIN 53852-1991

纺织品检验.织物中纱线长度比例的测定

Testing of textiles; determination of yarn length ratios in woven and knitted fabrics

适用范围：The standard describes the determination of yarn length ratios in woven and knitted textile fabrics.

ISO 3548-3-2012

Plain bearings -- Thin-walled half bearings with or without flange -- Part 3: Measurement of peripheral length

发布日期：2012-12-01  实施日期：2012-12-01

EN ISO 16610-85-2013

几何产品规范(GPS) 过滤法 第85部分:形态区域过滤器:分割滤波器

Geometrical product specifications (GPS). Filtration- Part 85:Morphological areal filters:Segmentation

实施日期：2013-02-01

NF X34-214-3-2012

Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles.

DIN EN ISO 10360-4-2003

几何产品规范(GPS) 座标测量机(CMM)的验收试验和鉴定试验 第4部分:用于扫描模式的座标测量机

Geometrical Product Specification (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning mode

适用范围：This part of ISO 10360 specifies the acceptance test which verifies that the performance of a CMM used in scanning measuring mode is as stated by the manufacturer. It also specifies the reverification ...

ISO 16663-2 CORR 1-2005

渔网 测定网目尺寸的试验方法 第2部分:网目长度 技术勘误表1

Fishing nets. Method of test for the determination of mesh size. Part 2:Length of mesh technical corrigendum 1

适用范围：This standard is Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh; Technical Corrigendum 1.

实施日期：2005-05-01