DIN EN 10222-4-2001

压力目的用钢锻件.第4部分:具有高极限强度的细晶粒可焊接的钢锻件

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German version EN 10222-4:1998

DIN EN 10222-5-2000

压力目的用钢锻件.第5部分:马氏、奥氏和奥氏-铁素体不锈钢

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999

适用范围：The document deals with steel forgings for pressure purposes.

BS EN 10216-4-2002

压力无缝钢管 交货技术条件 第4部分 规定低温特性的非合金和合金钢管

Nahtlose Stahlrohre fuer Druckbeanspruchungen. Technische Lieferbedingungen. Rohre aus unlegierten und legierten Staehlen mit festgelegten Eigenschaften bei tiefen Temperaturen Seamless Steel Tubes for...

实施日期：2002-06-26

BS EN 10025-4-2004

结构钢热轧制品.热机轧制的可焊接细粒钢的交货技术条件

Warmgewalzte Erzeugnisse aus Baustaehlen. Technische Lieferbedingungen fuer thermomechanisch gewalzte schweissgeeignete Feinkornbaustaehle Hot rolled products of structural steels Part 4:Technical deli...

适用范围：Part 4 of this document, in addition to Part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the thermomechanical rolled condition in the gra...

实施日期：2004-11-17

DIN EN 10025-1-2005

热轧结构钢钢材 第1部分:一般交货技术条件

Hot-rolled products of non-alloy structural steels - Part 1: General delivery conditions

发布日期：2005-02-01  实施日期：2005-02-01

EN 10222-5-1999

Steel Forgings for Pressure Purposes. Part 5:Martensitic,Austenitic and Austenitic-Ferritic Stainless Steels

实施日期：1999-12-01

BS EN 10028-5-2009

Flacherzeugnisse aus Druckbeh?lterst?hlen. Schwei?geeignete Feinkornbaust?hle,thermomechanisch gewalzt Flat products made of steels for pressure purposes Part 5:Weldable fine grain steels,thermomechanically rolled Produits plats en acier pour appareils. pression. Aciers soudables. grains fins,laminés thermomécaniquement

实施日期：2009-07-31

DIN EN 10028-3-2009

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

实施日期：2009-09-01

EN 10025-1-2004

非合金结构钢热轧制品.一般交货技术条件

Hot rolled products of structural steels. Part 1:General technical delivery conditions Supersedes EN 10025:1990,EN 10113-1:1993,EN 10113-2:1993,EN 10113-3:1993,EN 10137-1:1995 and EN 10137-2:1995

实施日期：2004-11-10

BS EN 10210-2-2006

精粒结构钢和非合金热轧空心型材.公差,尺寸和部分特性

Warmgefertigte Hohlprofile fuer den Stahlbau aus unlegierten Baustaehlen und aus Feinkornbaustaehlen. Grenzabmasse,Masse und statische Werte Hot finished structural hollow sections of non-alloy and fin...

适用范围：This part of EN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structuralhollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ...

实施日期：2006-05-31

EN 10025-3-2004

非合金结构钢热轧制品.长形产品的交货技术条件

Hot rolled products of structural steels. Part 3:Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels Supersedes EN 10113-1:1993 and EN 10113-2:1993

实施日期：2004-11-10

NF A49-200-3-2002

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.

BS EN 10216-3-2013

无缝钢管-技术交货条件-第3部分:合金精良颗粒钢管

Seamless steel tubes for pressure purposes — Technical delivery conditions Part 3: Alloy fine grain steel tubes

发布日期：2013-12-31  实施日期：2013-12-31

NF A49-502-2-2006

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.

BS EN 10025-1-2004

非合金结构钢热轧制品.一般交货技术条件

Warmgewalzte Erzeugnisse aus Baustaehlen. Allgemeine technische Lieferbedingungen Hot rolled products of structural steels Part 1:General technical delivery conditions Produits lamines a chaud en acier...

适用范围：1 This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document specifies the ...

实施日期：2004-11-17

NF A36-205-3-2009

Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.

BS EN 10216-3-2002

无缝钢管-技术交货条件-第3部分:合金精良颗粒钢管

Seamless Steel Tubes for Pressure Purposes-Technical Delivery Conditions-Part 3:Alloy Fine Grain Steel Tubes

实施日期：2002-06-19

DIN EN 15085-4-2008

Railway applications - Welding of railway vehicles and components - Part 4: Production requirements

实施日期：2008-01-01

EN ISO 2560-2009

Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification

实施日期：2009-10-01

EN 15085-4-2007

Railway applications. Welding of railway vehicles and components. Part 4:Production requirements

实施日期：2007-10-01