ISO/TR 18532-2009

对质量和工业标准化的统计方法应用指南

Guidance on the application of statistical methods to quality and to industrial standardization

适用范围：ISO/TR 18532:2009 describes a broad range of statistical methods applicable to the management, control and improvement of processes.

发布日期：2009-04-01  实施日期：2009-04-01

BS CECC 25300-1981

电子元器件质量评定协调体系.分规范.变压器用铁氧体磁芯

Harmonisiertes Guetebestaetigungssystem fuer Bauelemente der Elektronik:Rahmenspezifikation:Kerne aus magnetischen Oxiden fuer Anwendungen in der Leistungselektronik Magnetic Oxide Cores for Power Appl...

适用范围：Lists the characteristics, ratings and inspection requirements for magnetic cores and selects from the generic BS CECC 25000 the appropriate tests to be used in detail specifications derived from this ...

实施日期：1981-01-01

DIN EN 27574-3-1989

声学;测定和检验机械和设备发出噪声值的统计方法;第3部分:一组机床规定噪声值的简单(过渡)方法

Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 3: simple (transition) method for stated values for batches of machines; (iden...

适用范围：The standard specifies mainly the method for verifying stated noise emission values for batches of machines, if for the specific family of machines no specific statistical specifications are made.#,,#

BS 6873-1988

自行车用白炽灯规范

Filament Lamps for Cycles AMD 6639;April 30,1991;

适用范围：Lamps for cycle headlamps and rear lamps operating at up to 6 V. Methods of test and conditions of compliance to ensure quality and interchangeability.

实施日期：1988-02-29

ISO 3951-5-2006

计量抽样检验程序 第5部分:按接收质量限(AQL)检索的计量检验连续抽样计划(已知标准偏差)

Sampling procedures for inspection by variables -- Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)

适用范围：ISO 3951-5:2006 specifies a system of sequential sampling plans (schemes) for lot-by-lot inspection by variables. The schemes are indexed in terms of a preferred series of acceptance quality limit (AQL...

发布日期：2006-03-01  实施日期：2006-03-01

BS 5701-4-2003

利用质量(品质)数据进行质量控制和性能改进的指南 第4部分:品质检验性能控制和改进

Guide to quality control and performance improvement using qualitative (attribute) data. Attribute inspection performance control and improvement

适用范围：BS 5701-4 describes methods for enhancing the quality of attribute data used for monitoring, controlling and improving business processes.

BS QC 030000-1993

Harmonized system of quality assessment for electronic components. Rectangular connectors for frequencies below 3 MHz. Generic specification. General requirements and guide for the preparation of detail specifications for connectors with assessed quality

ISO 3951-2-2006

计量抽样检验程序 第2部分:按接收质量限(AQL)检索的单独质量特征逐批检验的单一抽样计划的一般规范

Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality cha...

适用范围：ISO 3951-2:2006 specifies an acceptance sampling system of single sampling plans for inspection by variables, indexed in terms of the Acceptance Quality Limit (AQL). ISO 3951-2:2006 is primarily design...

发布日期：2006-04-01  实施日期：2006-04-01

BS CECC 42101-1978

电子元器件质量评定协调体系.空白详细规范.主要供电话用低压变阻器

Harmonisiertes Guetebestaetigungssystem fuer Bauelemente der Elektronik. Vordruck fuer Bauartspezifikation:Niederspannungs-Varistoren Vorzugsweise fuer Telephonie-Anwendungen (Guetebestaetigungsstufe P...

适用范围：This standard lists the ratings, characteristics and inspection requirements which shall be included as mandatory requirements in accordance with BS CECC 42100.

实施日期：1978-01-01

EN 27574-2-1988

Acoustics Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment Part 2:Methods for Stated Values for Individual Machines

实施日期：1988-12-01

BS EN 124-1994

车辆和行人通过区域的排水沟盖和人孔盖.设计要求、型号试验、标志

Gully Tops and Manhole Tops for Vehicular and Pedestrian Areas-Design Requirements,Type Testing,Marking,Quality Control Replaces BS 497:Part 1:1976;

适用范围：This standard applies to gully tops and manhole tops with a clear opening up to and including 1000 mm, for installation within areas subjected to pedestrian and/or vehicular traffic. This standard does...

实施日期：1994-01-01

BS 9612 N019-1979

Abgedichtete (widerstandsverschweisste) Quarzkristalleinheiten fuer Oszillatoren. Detailspezifikation. DN,DZ,DQ und DP Gehaeuse,Frequenzbereich 17 bis 75 MHz. Dickenscherungsschwinger (3. Oberton),AT-Schnitt,fuer den eng temperaturbegrenzten Betrieb (temperaturgeregelt). Volles Guetebestaetigungsniveau Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN,DZ,DQ and DP enclosures,17 to 75 MHz frequency range. Third overtone thickness-shear mode,AT-cu

实施日期：1979-04-15

BS EN 122110-1994

电子元器件质量评定体系.SMA系列的射频同轴连接器的分规范

Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMA

适用范围：Provides information and rules for the preparation of detail specifications for the series SMA of miniature screw-coupled coaxial connectors.

BS 9300 C534-1971

Silizium-Koaxialwiderstandsschaltdioden. Detailspezifikation Electronic parts of assessed quality. Silicon coaxial resistive switching diode Diode de commutation resistive coaxiale au silicium. Specification detaillee

实施日期：1971-04-15

BS CECC 90104-1990

Harmonisiertes Guetebestaetigungssystem fuer Bauelemente der Elektronik. Familien Spezifikation:C. MOS Digitale integrierte Schaltungen Serien 4000 B und 4000 UB Specification for Harmonized system of quality assessment for electronic components Family specification C. MOS digital integrated circuits Series 4000 B and 4000 UB Système harmonis d'assurance de la qualit des composants électroniques Spécification de famille Circuits integres digitaux C. MOS Séries 4000 B et 4000 UB

实施日期：1990-11-30

BS IEC 61650-1997

可靠性数据分析技术.双向恒定故障率和双向恒定故障(元素)强度比较程序

Analysetechniken der Funktionsfaehigkeit. Verfahren fuer den Vergleich von zwei konstanten Ausfallraten und zwei konstanten Ausfall-(Ereignis)-intensitaeten Reliability Data Analysis Techniques-Procedu...

适用范围：This International Standard specifies procedures to compare two observed– failure rates;– failure intensities;– rates/intensities of relevant events.The procedures are used to determine whether an appa...

实施日期：1997-10-15

BS 5550-7.1.1-1961

Kinematographie. Produktion und Praesentation. Lichtquellen und Beleuchtung. Lichttonlampen. Spezifikation Cinematography. Part 7:Production and presentation. Section 7.1 Light sources and lighting. Subsection 7.1.1 Specification for exciter lamps Cinematographie. Production et presentation. Sources lumineuses et eclairage. Lampes phoniques. Specification AMD 6242:August 1967;AMD 402:January 1970;AMD 2960:September 1980

实施日期：1961-06-20

BS 5701-1-2003

利用质量(品质)数据进行质量控制和性能改进的指南 第1部分:企业、工业、商业和公共服务业品质图表的使用和价值

Guide to quality control and performance improvement using qualitative (attribute) data. Uses and value of attribute charts in business, industry, commerce and public service

适用范围：BS 5701-1 describes, in lay terms, the uses and value of pictorial control chart methods for enhancing the presentation and general understanding of qualitative (attribute) data arranged in a meaningfu...

BS 3878-1982

医院用软聚氯乙烯薄膜规范

Spezifikation fuer elastische PVCFolie fuer Krankenhaeuser Flexible PVC Sheeting for Hospital Use Spécification pour le PVC souple en feuille destin aux ho^pitaux AMD 6283:Novemeber,1990

适用范围：Specifies requirements for flexible unsupported PVC sheeting of thicknesses up to 900 $Gmm, intended for hospital use.

实施日期：1982-02-26

BS 9300 C405-429-1971

Silizium-Stabilisatordioden. Detailspezifikation Electronic parts of assessed quality. Silicon voltage-regulator diodes Diodes regulatrices de tension au silicium. Specifications detaillees

实施日期：1971-03-15