NF L31-343-1995

Aerospace series. Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.

NF C47-730/A13-2005

Automatic electrical controls for household and similar use - Part 1 : general requirements.

GB/T 25834-2010

金属和合金的腐蚀 钢铁户外大气加速腐蚀试验

Corrosion of metals and alloys - Accelerate corrosion testing of iron and steel in outdoor atmospheres

适用范围：本标准规定了大气环境中钢铁加速腐蚀试验的一般要求。这种试验宜在气候较干燥季节或地区的大气腐蚀户外暴露试验站（场）条件下进行。 本标准试验目的是： ― 较快速获得钢铁在大气环境下的耐腐蚀性能数据； ― 评价在给定的...

发布日期：2010-12-23  实施日期：2011-09-01

NF L16-007-004-2006

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004 : high corrosion and fluid resistance with surface preparation tolerance.

EN ISO 28706-2-2011

Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Part 2:Determination of resistance to chemical corrosion by boiling acids,boiling neutral liquids and/or their vapours [Superseded:CEN EN 14483-2]

实施日期：2011-05-01

EN ISO 11463-2008

Corrosion of metals and alloys. Evaluation of pitting corrosion

实施日期：2008-04-01

EN 13126-9-2013

建筑五金 窗和门高窗的要求和试验方法 第9部分:水平和垂直回转窗的五金件

Building hardware. Requirements and test methods for windows and door height windows. Part 9:Hardware for horizontal and vertical pivot windows

实施日期：2013-02-01

ISO 9762-2000

航空航天 航空器操纵钢丝绳组件 尺寸及端部配件组合

Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations

发布日期：2000-12-01  实施日期：2000-12-01

DIN EN ISO 3651-2-1998

不锈钢抗晶间腐蚀的测定.第2部分:铁氧体奥氏体和铁氧体--奥氏体(复式)不锈钢.生硫酸铜剂中进行腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric...

适用范围：The document specificies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic(duplex) stainless steels in a media containing sulphu...

GB/T 24201-2009

高炉炭块抗铁水熔蚀性试验方法

Test method for corrosion resistance of blast furnace brick to pig iron

适用范围：本标准规定了高炉炭块抗铁水熔蚀性试验方法的原理、仪器和设备、试验步骤、结果计算和试验报告。本标准适用于高温下测定高炉炭块抗铁水熔蚀性，也可以测定其他高炉耐火材料的抗铁水溶蚀性。

发布日期：2009-07-08  实施日期：2010-04-01

GB/T 28485-2012

镀层饰品 镍释放量的测定 磨损和腐蚀模拟法

Coated adornment - Detection of nickel release - Method for simulation of wear and corrosion

适用范围：本标准规定了为测定非镍镀层饰品的镍释放量而预先采用的磨损和腐蚀的方法。 本标准适用于长期接触皮肤的非镍镀层饰品。

发布日期：2012-06-29  实施日期：2012-11-01

ISO 12732-2006

金属和合金的腐蚀 用双循环法进行电化学的电位动力再活化测量(根据Cihal"s方法)

Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal''s method)

适用范围：ISO 12732:2006 specifies the method for measuring the degree of sensitization (DOS) in stainless steel and nickel-based alloys using the Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR...

发布日期：2006-09-01  实施日期：2006-09-01

NF M87-228-2013

Petroleum and natural gas industries - Aluminium alloy drill pipe

NF E29-316-3-2000

Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3 : check valves.

ASTM C283-2013

搪瓷器具耐沸腾酸侵蚀性试验方法

Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid

实施日期：2013-05-01

ISO 28706-1-2008

搪玻璃釉 耐化学腐蚀的测定 第1部分:在室温下用酸测定耐化学腐蚀

Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 1: Determination of resistance to chemical corrosion by acids at room temperature

适用范围：ISO 28706-1:2008 describes a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack by an acid at room temperature, and also specifies a method of cl...

发布日期：2008-12-01  实施日期：2008-12-01

DIN EN ISO 28706-3-2011

Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Part 3:Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008); German version EN ISO 28706-3:2011

ISO 10380-2003

管道 波纹状金属软管和软管组件

Pipework -- Corrugated metal hoses and hose assemblies

适用范围：ISO 10380:2002 specifies the requirements for the design, manufacture and testing of corrugated metal hoses and hose assemblies for general purposes. It also specifies sizes from DN 4 to DN 300, pressu...

发布日期：2003-02-01  实施日期：2003-02-01

ISO 11997-1-2005

色漆和清漆 耐周期性腐蚀的测定 第1部分:湿的(盐雾)/干的/湿度的测定

Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity

适用范围：ISO 11997-1:2005 describes a method for the determination of the resistance of coatings to one of four defined cycles of wet (salt fog)/dry/humidity conditions using specified solutions.

发布日期：2005-03-01  实施日期：2005-03-01

NF A91-270-2005

Mechanically deposited coatings of zinc - Specification and test methods.