BS EN 2587-1990

两端均为叉端、杆部有螺纹的可调整的操纵杆.尺寸和负荷

Einstellbare Doppelgabelkoepfe mit Gewindeschaft Masse und Belastungen Rod Ends,Adjustable Double Fork and Threaded Shank. Dimensions and Loads Embouts reglables. chape double et. tige filetee. Dimensi...

实施日期：1990-01-01

DIN ISO 7653-1986

道路车辆,商业用车辆,动力输出装置（ＰＴＯ）和辅助传动机组之间的离合器

Road vehicles, commercial vehicles; couplings between power take-offs and ancillary driven units; identical with ISO 7653, edition 1985 (status as of 1986)

NF L51-414-1974

机载变流器 Ⅲ型

Electric convertors for aircraft. Type III.

实施日期：1974-05-01

DIN 71752-1994

叉形活节;叉头

Fork joints; yokes

DIN EN 2587-1991

航空航天.带可调节双叉和螺纹杆的连接杆端.尺寸及负载

Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads

GB/T 4329-2001

农业拖拉机和机具 锁销和弹性销 尺寸和要求

Tractor and machinery for agriculture and forestry--Linch pins and spring pins--Dimensions and requirements

发布日期：2001-02-26  实施日期：2001-09-01

DIN EN 2546-2006

Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions; German and English version EN 2546:2006

实施日期：2006-12-01

BS EN 50436-2-2007

Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for general preventive use

实施日期：2008-04-30

ISO 2332-2009

农业拖拉机和机械 三点悬挂机具的联接装置 机具上的间隙范围

Agricultural tractors and machinery -- Connection of implements via three-point linkage -- Clearance zone around implement

发布日期：2009-01-01  实施日期：2009-01-01

BS EN 2792-1991

啮合量为1.5<双>螺纹PH1直径的双叉螺纹轴可调连杆端头.尺寸和负载

Einstellbare Doppelgabelkoepfe mit Gewindeschaft mit Einschraubtiefe von 1,5 Gewind Masse und Belastungen Rod Ends,Adjustable,Double Fork and Threaded Shank with Engagement:1.5 x Thread Diameter-Dimens...

实施日期：1991-01-01

BS EN 2498-1990

具有自润滑衬套和螺纹杆的可自动调心轴套的操纵杆规范.尺寸和规范

Einstellbare Oesenkoepfe mit Gelenklager mit selbstschmierender Beschichtung und Gewindeschaft. Masse und Belastungen Rod Ends,Adjustable Self-Aligning Plain Bearing,with Self-Lubricating Liner and Thr...

实施日期：1990-01-01

DIN 20311-2002

矿用直径100 mm以上大孔径钻进用阳钻管

Drill tubes with diameters exceeding 100 mm for large hole boring in mining

BS EN 2501-1992

轴承.有自润滑轴衬和宽内环的耐腐蚀钢球形滑动轴承的尺寸和负荷

Gelenklager aus Korrosionsbestaendigem Stahl mit selbstschmierender Beschichtung und breitem Innenring. Masse und Belastungen Bearings,Spherical Plain in Corrosion Resisting Steel with Self-Lubricating...

实施日期：1992-01-01

BS EN ISO 21329-2004

石油和天然气工业.管道运输系统.机械连接件的试验程序

Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors

DIN 20314-1990

采矿用直径100mm 以上大钻孔钻杆管的螺纹

Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining

NF L35-183-2006

Aerospace series - Washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated, for flight control rods - Dimensions.

DIN EN 2498-1991

航空和航天.带自润滑层和螺纹轴以及滑动轴承可调节的杆端.尺寸和负载

Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads

NF L51-413-1971

机载变流器 Ⅱ型

Electric convertors for aircraft. Type ii.

BS ISO 12240-4-1998

关节轴承.径向关节轴承杆端

Spherical Plain Bearings-Part 4:Spherical Plain Bearings Rod Ends Supersedes BS 5983-5:1982;

实施日期：1998-11-15

GB/T 5922-2008

汽车和挂车 气压制动装置压力测试连接器技术要求

Motor vehicles and towed vehicles - Pressure test connection for compressed-air pneumatic braking equipment

发布日期：2008-10-20  实施日期：2009-04-01