NF T76-152-4-2013

Adhesives for load-bearing timber structures - Test methods - Part 4 : determination of the effects of wood shrinkage on the shear strength.

DIN EN ISO 14529-2-2000

塑料.三聚氰胺/石炭酸粉筑模成分.第2部分:试验制备与特性测定

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999

适用范围：The document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of melamine-phenolic powder moulding compounds (MP-PMCs). Requirements ...

NF T76-152-7-2004

Adhesives for load bearing timber structures - Test methods - Part 7 : determination of the conventional working life.

EN 302-5-2013

承重结构用胶粘剂 试验方法.第5部分:下最大极限装配时间测定

Adhesives for load-bearing structures. Test methods. Part 5:Determination of maximum assembly time under referenced conditions

实施日期：2013-03-01

BS EN 302-7-2013

承重木结构用胶粘剂 试验方法 标准条件下使用寿命的测定

Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions

发布日期：2013-04-30  实施日期：2013-04-30

NF T51-008-1998

塑料制品.酚醛树脂模制件.游离氨的检测

Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia.

BS EN 302-3-2004

承重木结构用胶粘剂.试验方法.通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响

Klebstoffe fuer tragende Holzbauteile. Pruefverfahren. Bestimmung des Einflusses von Saeureschaedigung der Holzfasern durch Temperatur-und Feuchtezyklen auf die Querzugfestigkeit Adhesives for load-bea...

适用范围：This part of EN 302 specifies a method for determining the effect on bond strength of damage to wood fibres caused by the action of acids from the adhesive during climatic cycling. It is suitable for t...

实施日期：2004-07-22

NF T54-421-2005

Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate.

ASTM D5224-2012

热固模塑混合物的压模塑试验样品规程

Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

适用范围：<p>The conditions at which compounds are molded are known to influence the properties of the specimens. The degree of cure, elimination of knit-lines between particles, density of the part, and degrada...

实施日期：2012-04-01

NF T76-152-5-2013

Adhesives for load-bearing structures - Test methods - Part 5 : determination of maximum assembly time under referenced conditions.

NF T76-151-2013

Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements

EN 302-3-2013

承重木结构用胶粘剂 试验方法 第3部分:通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响

Adhesives for load-bearing timber structures. Test methods. Part 3:Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength

实施日期：2013-03-01

NF T51-442-1995

Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts.

EN ISO 14529-3-1999

Plastics. Melamine/Phenolic Powder Moulding Compounds (MP-PMCs). Part 3:Requirements for Selected Moulding Compounds ISO 14529-3:1999

实施日期：1999-11-01

EN ISO 172-1998

Plastics. Phenol-Formaldehyde Mouldings. Detection of Free Ammonia ISO 172:1978

实施日期：1998-07-01

BS EN 302-2-2004

承重木结构用胶粘剂:试验方法.抗剥离性测定(实验室法)

Klebstoffe fuer tragende Holzbauteile. Pruefverfahren. Bestimmung der Delaminierungsbestaendigkeit Adhesives for load-bearing timber structures Test methods Part 2:Determination of resistance to delami...

适用范围：This part of EN 302 specifies a method for determining the resistance to delamination of bonded joints. It is suitable for the following applications: a) for assessing the compliance of adhesives wit...

实施日期：2004-07-22

ISO 8987-2005

塑料 酚醛树脂 在B转变试验板上的活化性能的测定

Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate

适用范围：ISO 8987:2005 specifies methods for the determination of the B-transformation time of phenolic resins at a specified temperature and under specified conditions on a heated test plate. Two methods are d...

发布日期：2005-10-01  实施日期：2005-10-01

DIN EN 302-3-2006

承重木结构用粘结剂 试验方法 第3部分:通过温湿周期酸性破坏效果对横向抗拉强度影响的测定

Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength

适用范围：This Part of EN 302 specifies a method for determining the effect on bond strength of damage to wood fibres caused by the action of acids from the adhesive during climatic cycling. It is suitable for t...

实施日期：2006-02-01

NF T76-152-3-2013

Adhesives for load-bearing timber structures - Test methods - Part 3 : determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength.

DIN EN 302-2-2004

承重木结构用粘接剂 试验方法 第2部分:耐脱开性能的测定

Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination