EN 14847-2005

Aerosol containers. Tinplate containers. Dimensions of the 25,4 mm aperture

实施日期：2005-11-01

DIN EN 4550-4-2004

航空和航天 管连接37° 设计表 英制系统 第4部分:锥形接头

Aerospace series - Pipe coupling 37°- Design configuration - Inch series - Part 4: Female sealing ends

BS EN 62610-4-2013

电子设备机械结构 按照IEC 60297 和IEC 60917系列标准的机箱用热量管理 水供给换热器在电子柜冷却性能测试

Mechanical structures for electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series. Cooling performance tests for water supplied heat exchangers in electr...

发布日期：2013-11-30  实施日期：2013-11-30

ISO 6162-1-2012

液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:压力为3.5MPa至35MPa(35巴至350巴)、DN 13-DN 127时使用的凸缘连接器

Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35...

发布日期：2012-12-14  实施日期：2012-12-14

ISO 14206-1998

航空航天--飞机机构用轻负荷单列刚性密封球轴承--英制系列

Aerospace -- Airframe ball bearings, single-row, rigid, sealed, light duty -- Inch series

发布日期：1998-04-01  实施日期：1998-04-01

NF L43-633-2003

Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.

NF L43-632-2003

Aerospace series - Pipe coupling, 37 o, in heat resisting steel - Cap assemblies - Inch series.

BS EN 3138-2001

航空航天系列 铆钉,固体100摄氏度常规头耐腐蚀钢FE-PA2601钝化的英制系列

Luft-und Raumfahrt. Vollniete,mit 100 normalem Senkkopf mit Dom,aus korrosionsbestaendigem Stahl FE-PA2601,passiviert,Zoll-Reihe Aerospace series-Rivets,solid,100 countersunk normal head with dome,in c...

实施日期：2001-09-15

DIN EN 3642-1996

航空和航天.钛TI-P02制、阳极氧化、标准头、100°沉孔实心铆钉.英制系列

Aerospace series - Rivets, solid, 100<Grad> countersunk normal head, with dome, in titanium TI-PO2, anodized - Inch based series; German version EN 3642:1996

DIN EN 4550-2-2004

航空和航天 管连接37° 设计表 英制系列 第2部分:旋入端

Aerospace series - Pipe coupling 37°- Design confirguration - Inch series - Part 2: Port ends

BS ISO 6162-1-2002

液压传动 带有分体或整体式法兰夹和米制或英制螺钉的法兰接头 第1部分:3.5 MPa(35巴)至35 MPa(350巴）、DN13-DN127压力下使用的法兰接头

Fluidtechnik. Hydraulik-Leitungsflansche,geteilt oder einteilig,mit metrischen oder zoelligen Schrauben. Leitungsflansche fuer Druecke von 3,5 MPa (35 bar) bis 35 MPa (350 bar),Nenngroessen DN 13 bis D...

实施日期：2002-12-16

BS EN 3140-2001

航空航天系列 铆钉,固体100摄氏度埋头耐腐蚀钢FE-PA2601钝化的英制系列

Luft-und Raumfahrt. Vollniete,mit 100 normalem Senkkopf,aus korrosionsbestaendigem Stahl FE-PA2601,passiviert,Zoll-Reihe Aerospace Series-Rivets,Solid,100 Degree Countersunk Normal Head,in Corrosion Re...

实施日期：2001-09-15

NF L53-202-010-2009

Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010 : terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 oC for metric and inch stud series - Product standard.

EN 4266-2013

航空和航天 耐蚀钢制,镀镉关节轴承.镀镉 宽系列.尺寸和负载.英制系列

Aerospace series. Bearing spherical plain,metal to metal,in corrosion resisting steel,cadmium plated. Wide series. Dimensions and loads. Inch series

实施日期：2013-03-01

DIN EN 4266-2013

航空和航天.耐蚀钢制、镀镉关节轴承.宽系列.尺寸和负载.英制系列

Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series; German and English version EN 4266:2013

实施日期：2013-06-01

DIN ISO 3019-2-2004

液压传动 装配活塞泵和马达的凸缘和轴端的尺寸和标识码 第2节:公制系列

Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends - Part 2: Two- and four-hole flanges and shaft ends - Metric se...

DIN EN 60297-3-103-2005

482.6mm(19英寸)系列的机械结构尺寸 第3-103部分:编号和导销

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482, 6 mm (19 in) series - Part 3-103: Keying and alignment pin (IEC 60297-3-103:2004)

实施日期：2005-06-01

EN 4550-4-2003

Aerospace series. Pipe coupling,37 degree. Design configuration. Inch series. Part 4:Female sealing ends

实施日期：2003-01-01

EN 4549-2003

Aerospace series. Pipe coupling,in heat resisting steel or in heat resisting nickel alloy. Coupling end,welded. Design configuration. Inch series

实施日期：2003-01-01