NF L43-630-2003

Aerospace series - Pipe coupling 37 o, spherical, in heat resisting steel - Straight unions, threaded - Inch series.

EN 4561-2003

Aerospace series. Pipe coupling,welded,in heat resisting steel. Elbow 90 degree. Inch series

实施日期：2003-02-01

DIN EN 3373-010-2009

Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150℃ for metric and inch stud series - Product standard

实施日期：2009-09-01

BS DD IEC/TS 62610-3-2010

Mechanical structures for electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series. Part 3:Design guide:Evaluation method for thermoelectrical cooling systems (Peltier effect)

实施日期：2010-02-28

BS ISO 5296-2012

Synchronous belt drives. Belts with pitch codes MXL,XXL,XL,L,H,XH and XXH. Metric and inch dimensions

发布日期：2012-06-30  实施日期：2012-06-30

GB/T 18776-2002

公差尺寸 英寸和毫米的互换算

Tolerance dimensions--Conversion form inches into millimetres and vice versa

发布日期：2002-07-15  实施日期：2003-01-01

NF L31-610-003-2011

Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low ocillations - Narrow series - Dimensions and loads - Part 003 : inch series with low friction

EN 4555-2003

Aerospace series. Pipe coupling 37 degree,in heat resisting steel. Ferrules,welded end. Inch series

实施日期：2003-02-28

EN 3373-010-2009

Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Part 010:Terminal lugs,ring shaped,tin plated,for crimping on copper conductors,temperature up to 150 Degree C for metric and inch stud series. Product standard

实施日期：2009-02-01

BS ISO 6162-2-2002

液压传动 具有分体或整体法兰夹和米制或英制螺钉的法兰接头 第2部分:35 MPa(350巴)至40 MPa(400巴）、DN13-DN51压力下使用的法兰接头

Fluidtechnik. Hydraulik-Leitungsflansche,geteilt oder einteilig,mit metrischen oder zoelligen Schrauben. Leitungsflansche fuer Druecke von 35 MPa (350 bar) bis 40 MPa (400 bar),Nenngroessen DN 13 bis D...

实施日期：2002-12-13

NF C93-464-3-105-2009

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105 : dimensions and design aspects for 1U high chassis.

IEC 60297-3-106-2010

电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-106部分:符合IEC 60917-2-1适用于米制机箱或机架的插箱和底架的适应尺寸

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric c...

发布日期：2010-03-16  实施日期：2010-03-16

DIN EN 14848-2006

气溶胶容器 25.4mm开口的金属容器 阀座尺寸

Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups

实施日期：2007-09-01

IEC 60297-3-103-2004

电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分:编码键和定位销

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin

发布日期：2004-08-17  实施日期：2004-08-17

ISO 12573-2010

航空器 管道公差 英制系列

Aircraft -- Tubing tolerances -- Inch series

发布日期：2010-09-01  实施日期：2010-09-01

DIN EN 4538-003-2011

Aerospace series. Bearings,spherical plain,in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads. Part 003:Inch series with low friction coefficient; German and English version E

ISO 14219-1998

航空航天--飞机结构用重负荷密封精密单列自调心球轴承 英制系列

Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty -- Inch series

发布日期：1998-05-01  实施日期：1998-05-01

EN 14848-2005

Aerosol containers. Metal containers with 25,4 mm aperture. Dimensions of valve cups Incorporating corrigendum June 2007

实施日期：2005-11-01

NF L43-635-2003

Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.

IEC 60297-3-100-2008

电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-100部分:前面板、插箱、底架、机架和机箱的基本尺寸

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets...

发布日期：2008-11-26  实施日期：2008-11-26