DIN EN 3506-2003

航空和航天 耐热合金热轧板 厚度2.0mm≤a≤100mm 尺寸

Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm <kleiner => <(kursiv)a> <kleiner => 100 mm; dimensions

适用范围：The document specifies the dimensions and tolerances of hot rolled sheets and plates, in heat resisting alloys thickness 2,0 mm <kleiner => a <kleiner => 100 mm, for aerospace applications.#,,#

DIN EN 2467-2008

Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0, 4 mm≤a≤20 mm - 520 MPa≤Rm≤670 MPa

实施日期：2008-10-01

BS EN 13025-3-2005

Packaging. Light gauge metal containers. Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 ml

实施日期：2006-03-31

ASTM A693-2006

沉淀硬化耐热不锈钢中厚板、薄板和带材规格

Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate,Sheet,and Strip

实施日期：2006-03-01

DIN EN 12691-2006

防水卷材 防水沥青、塑料和橡胶卷材 耐冲击测定

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact

适用范围：This European Standard specifies a test for puncture by impact on sheets for roof waterproofing. Mechanical stress on waterproofing sheets ranges from static long-term loads to dynamic short-term loads...

实施日期：2006-06-01

ASTM B670-2007

高温用沉淀硬化镍合金(UNS No7718)中厚板、薄板及带材的规格

Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate,Sheet,and Strip for High-Temperature Service

适用范围：<p>1.1 This specification covers rolled precipitation hardenable nickel alloy (N07718)* plate, sheet, and strip in the annealed condition (temper).</p><p>1.2 The values stated in inch-pound units are ...

实施日期：2007-11-01

BS 2F 66-1982

Spezifikation fuer Korkbahnen mit Gummibindung Rubber Bonded Cork Sheets Specification pour liège en plaques. support caoutchouc colle

实施日期：1982-01-01

EN 2087-2005

Aerospace series. Aluminium Alloy AL-P2014A. T6 or T62. Clad Sheet and Strip. 0,4 mm Less Than or Equal to a Less Than or Equal to 6 mm

实施日期：2005-10-01

BS EN 12576-1998

塑料.纤维增强复合物.SMC、BMC和DMC的压缩模制试验板的预先制备

Kunststoffe. Fasverstaerkte Verbundwerkstoffe. Herstellung von formgepressten Pruefplatten aus SMC,BMC und DMC Plastics-Fibre Reinforced Composites-Preparation of Compression Moulded Test Plates of SMC...

适用范围：Plastics, Thermosetting polymers, Reinforced materials, Composite materials, Fibres, Reinforcing materials, Moulded materials, Sheet materials, Test specimens, Testing conditions, Test equipment, Speci...

实施日期：1998-11-15

GB 3281-1982

不锈耐酸及耐热钢厚钢板 技术条件

Technical requirements for acid-resistant stainless and heat-resisting steel plates

GB 3988-1983

石棉橡胶板压缩率,回弹率试验方法

实施日期：1984-11-01

EN 1186-4-2002

Materials and Articles in Contact with Foodstuffs. Plastics. Part 4:Test Methods for Overall Migration into Olive Oil by Cell Supersedes ENV 1186-4:1994

实施日期：2002-04-01

DIN EN ISO 527-3-2003

塑料 拉伸性能的测定 第3部分:薄膜和薄板材的试验条件

Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002)

DIN EN 13948-2008

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration

实施日期：2008-01-01

NF L14-221-2007

Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm < or = a < or = 6 mm.

GB/T 11718.3-1989

中密度纤维板 试件的制备

Medium density fiberboard--Cutting and measurement of test pieces

EN 2695-2005

Aerospace series Aluminium alloy AL-P6081-T6 Sheet and strip 0,3 mm Less Than or Equal to a Less Than or Equal to 6 mm

实施日期：2005-06-01

ISO 3574-2008

商品级和冲压级冷轧碳素钢薄板

Cold-reduced carbon steel sheet of commercial and drawing qualities

适用范围：ISO 3574:2008 applies to cold-reduced carbon steel sheet of commercial and drawing qualities. It is suitable for applications where the surface is of prime importance.

发布日期：2008-04-01  实施日期：2008-04-01

IEC 61249-2-41-2010

印制板和其他互连结构用材料 第2-41部分:包层和非包层增强基材 无铅装配用阻燃型铜包环氧溴化物纤维素纸/编织的E玻璃增强层压板(垂直燃烧试验)

Materials for printed boards and other interconnecting structures. Part 2-41:Reinforced base materials clad and unclad. Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of de...

适用范围：This part of IEC 61249 gives requirements for properties of brominated epoxide cellulose paperreinforced core/woven E-glass reinforced surface laminate sheets of defined flammability(vertical burning t...

发布日期：2010-04-21  实施日期：2010-04-21

CNS 1361-1983

热浸法镀锌钢片检验法

Method of test for hot-dip galvanized sheets