ASTM A1063/A1063M-2011

Standard Specification for Steel Sheet,Twin-Roll Cast,Zinc-Coated (Galvanized) by the Hot-Dip Process

实施日期：2011-05-01

ISO 630-3-2012

结构钢 第3部分:细粒结构钢的交货技术条件

Structural steels -- Part 3: Technical delivery conditions for fine-grain structural steels

发布日期：2012-06-01  实施日期：2012-06-01

DIN EN 3361-2007

Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a≤6 mm, 1070 MPa≤Rm≤1220 MPa

实施日期：2007-11-01

NF A35-552-3-2006

Steels for quenching and tempering - Part 3 : technical delivery conditions for alloy steels.

ISO 3573-2008

商品级和冲压级热轧碳素钢薄板

Hot-rolled carbon steel sheet of commercial and drawing qualities

适用范围：ISO 3573:2008 applies to hot-rolled carbon steel sheet of commercial and drawing qualities. Hot-rolled steel sheet is suitable for many applications where the presence of oxide or scale, or normal surf...

发布日期：2008-04-01  实施日期：2008-04-01

DIN EN 508-3-2009

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel

实施日期：2009-11-01

BS EN 10083-3-2006

淬火钢和回火钢.第3部分:硼钢的交付技术状态

Vergütungsstahle. Technische Lieferbedingungen für legierte St?hle Steels for quenching and tempering. Part 3:Technical delivery conditions for alloy steels Aciers pour trempe et revenu. Conditions tec...

适用范围：This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for:- semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006,C...

实施日期：2006-08-31

EN 3162-2007

Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted,solution treated and precipitation treated,sheet and strip a Less than or equal to 6 mm,Rm Greater than or equal to 930 MPa

实施日期：2007-08-01

NF L10-541-2008

Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a < or = 6 mm, Rm > or = 930 MPa.

ISO 28723-2008

搪玻璃釉 换热器用搪瓷钢板的边缘涂层的测定

Vitreous and porcelain enamels -- Determination of the edge covering on enamelled steel plate to be used in heat exchangers

适用范围：ISO 28723:2008 specifies a test method for the determination of the covering of the edge of enamelled steel plate to be used in heat exchangers. This method is applicable to all enamelling processes. I...

发布日期：2008-10-01  实施日期：2008-10-01

ASTM E1659-2012

薄钢板上锌镍合金电解电镀层的电镀化学分析的试验方法

Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

适用范围：These test methods for the chemical analysis of zinc-nickel alloy coating on sheet steel are primarily intended as referee methods to test such materials for compliance with compositional specification...

实施日期：2012-04-01

NF P34-900-2007

Self-supporting double skin metal faced insulating sandwich panels - Factory made products - Specifications.

ASTM A1083/A1083M-2012

双辊铸轧处理生产的高强度低合金碳素结构钢和冷轧薄板标准规格

Standard Specification for Steel,Sheet,Cold-Rolled,Carbon,Structural,High-Strength Low-Alloy,Produced by Twin-Roll Casting Process

实施日期：2012-11-01

BS EN ISO 28763-2011

Emails und Emaillierungen. Regenerative,emaillierte und gepackte Bleche für Luft-Gas-und Gas-Gas-W?rmeaustauscher. Anforderungen Vitreous and porcelain enamels. Regenerative,enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications émaux vitrifiés. échangeurs thermiques pour réchauffeurs air-gaz et gaz-gaz. empilement de panneaux émaillés rempla?ables et démontables. Spécifications

实施日期：2011-04-30

ASTM A875/A875M-2009a

热浸镀锌-5%铝合金钢薄板规格

Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process

适用范围：<p id="s00002">1.1 This specification covers steel sheet, in coils and cut lengths, metallic-coated by the hot-dip process, with zinc-5 % aluminum alloy coating. The Zn-5Al alloy coating also contains ...

BS EN ISO 14577-2-2002

金属材料 硬度和材料参数的仪器化缩进试验 第2部分:试验机的验证和校准

Metallic materials Instrumented indentation test for hardness and materials parameters Part 2:Verification and calibration of testing machines

适用范围：ISO 14577-2 specifies the method of verification and calibration of testing machines for carrying out the instrumented test in accordance with ISO 14577-1.It describes a direct verification method for ...

实施日期：2002-11-22

BS ISO 15179-2012

Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel

发布日期：2012-03-31 

ISO 14577-3-2002

金属材料 硬度和材料参数的仪器压痕试验 第3部分:基准块的校准

Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks

适用范围：ISO 14577-3 specifies a method for the calibration of reference blocks to be used for the indirect verification of testing machines for the instrumented indentation test, as specified in ISO 14577-2.

发布日期：2002-10-01  实施日期：2002-10-01

EN 502-2013

金属薄板屋面制品 完全支撑不锈铝薄板制屋面制品规范

Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet

实施日期：2013-03-01

ASTM A1039/A1039M-2012

用双滚轴铸造法生产的商用热轧结构碳钢薄板的标准规格

Standard Specification for Steel,Sheet,Hot Rolled,Carbon,Commercial,Structural,and High-Strength Low-Alloy,Produced by Twin-Roll Casting Process

适用范围：<p id="s00002">1.1 This specification covers commercial and structural steel sheet in coils and cut lengths produced by the twin-roll casting process.</p> <p id="s00003">1.2 The steel sheet is availabl...

实施日期：2012-04-15