ISO 1179-1-2007

一般用途和液压传动的连接件 带有合成橡胶或金属对金属密封的ISO 228-1螺纹端口和螺柱端 第1部分:螺纹端口

Connections for general use and fluid power. Ports and stud ends with iso 228-1 threads with elastomeric or metal-to-metal sealing. Part 1:Threaded ports first edition [superseded:Iso 1179]

适用范围：This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable studends shown in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in IS...

实施日期：2007-08-15

BS EN ISO 6149-1-2007

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Ports with truncated housing for O-ring seal

实施日期：2006-03-31

EN ISO 6149-3-2007

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Part 3:Dimensions,design,test methods and requirements for light-duty (L series) stud ends

实施日期：2007-02-01

BS EN ISO 1179-4-2008

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Stud ends for general use only with metal-to-metal sealing (type B)

实施日期：2009-02-28

EN ISO 1179-1-2008

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Part 1:Threaded ports

实施日期：2008-04-01

ISO 6149-2-2006

液压和一般用途接头 带ISO 261米制螺纹和O形圈密封的油口和螺纹端头 第2部分:重型(S系列)螺栓端头的尺寸、设计、试验方法和要求

Connections for hydraulic fluid power and general use ports and stud ends with iso 261 metric threads and o-ring sealing. Part 2:Dimensions,design,test methods and requirements for heavy-duty (s series...

适用范围：This part of ISO 6149 specifies dimensions, performance requirements and test procedures for metricadjustable and non-adjustable heavy-duty (S series) stud ends and O-rings.Stud ends in accordance with...

实施日期：2006-02-15

DIN 42925-2004

额定电压为400－690 Ｖ的鼠笼式三相交流电动机用接线箱的引入线

Terminal box cable entries for three-phase cage induction motors with at rated voltages from 400 V to 690 V

适用范围：This standard applies to entries into the terminal box of three-phase induction motors in accordance with DIN EN 50347 with rated voltages from 400 V to 690 V and/or rated voltage ranges between 380 V ...

ISO 6149-3-2006

液压和一般用途接头 带ISO 261米制螺纹和O形圈密封的油口和螺纹端头 第3部分:轻型(L系列)螺栓端头的尺寸、设计、试验方法和要求

Connections for hydraulic fluid power and general use ports and stud ends with iso 261 metric threads and o-ring sealing. Part 3:Dimensions,design,test methods and requirements for light-duty (l series...

适用范围：This part of ISO 6149 specifies dimensions, performance requirements and test procedures for metricadjustable and non-adjustable light-duty (L series) stud ends and O-rings.Stud ends in accordance with...

实施日期：2006-02-15

NF E48-065-3-2000

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B).

BS ISO 6149-4-2006

Leitungsanschluesse fuer Fluidtechnik und allgemeine Anwendung. Einschraubloecher und Einschraubzapfen mit Gewinden nach ISO 261 und O-Ring-Abdichtung. Masse,Konstruktion,Pruefverfahren und Anforderungen an Verschlussschrauben mit Aussen-oder Innen-Sechskant Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4:Dimensions,design,test methods and requirements for external hex and internal hex port plugs Raccordements pour transmissio

实施日期：2006-06-30

NF E49-051-1-2008

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports.

BS EN ISO 9974-1-2000

普通和液力用连接器.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.螺纹气门

Leitungsanschluesse fuer Fluidtechnik und allgemeine Anwendung. Einschraubloecher und Einschraubzapfen mit Gewinde nach ISO 261 und Elastomerdichtung oder metallener Dichtkante. Einschraubloecher Conne...

适用范围：This part of ISO 9974 specifies dimensions for ports with ISO 261 threads and elastomeric (type E) or metal-to-metal (type B) sealing for general use and in fluid power applications with the stud ends ...

实施日期：2000-08-15

NF L43-216-2006

Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration.

ISO 4039-2-1998

道路车辆 气压制动系统 第2部分:有锥形密封面的管、阳螺纹管接头和螺纹孔

Road vehicles -- Pneumatic braking systems -- Part 2: Pipes, male fittings and holes with conical sealing surface

发布日期：1998-07-01  实施日期：1998-07-01

HB 3834-1986

螺纹孔引孔冲头

发布日期：1986-07-13  实施日期：1986-10-01

ISO 16030-2001

气动液力.连接.出口和堵头

Pneumatic fluid power. Connections. Ports and stud ends first edition;amendment 1:4/1/2005

适用范围：This International Standard specifies dimensions and performance requirements for ports and stud ends with parallel threads for pneumatic fluid power applications. It specifies reusable, positively ret...

实施日期：2001-12-15

BS ISO 9974-4-2006

Leitungsanschluesse fuer Fluidtechnik und allgemeine Anwendung. Einschraubloecher und Einschraubzapfen mit Gewinde nach ISO 261 und Elastomerdichtung oder metallener Dichtkante. Masse,Konstruktion,Pruefverfahren und Anforderungen fuer Verschlussschrauben mit Aussen-oder Innensechskant Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 4:Dimensions,design,test methods and requirements for external hex and internal h

实施日期：2006-06-30

DIN EN ISO 6149-1-2007

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006)

实施日期：2007-05-01

BS EN ISO 1179-2-2013

通用和液压传动用连接件 带弹性体密封件或金属对金属密封件的ISO 228-1标准螺纹端口或螺柱端头 带弹性体密封件(E型)的重型(S系列)和轻型(L系列)螺柱端头

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealingHeavy-duty (S series) and light-duty (L series) stud ends with elastome...

发布日期：2013-11-30  实施日期：2013-11-30

DIN 74235-1991

液压制动系统.螺纹孔

Hydraulic braking systems; tapped holes

适用范围：The dimensions for tapped holes used in hydraulic braking systems of road vehicles to receive pipes with flares and male fittings.