BS A 358-2-2000

MJ-Gewinde. Grenzmasse fuer Schrauben und Muttern MJ Threads-Part 2:Limit Dimensions for Bolts and Nuts Filetage MJ. Dimensions limites pour vis et ecrous Supersedes BS 6293-2:1994

实施日期：2000-01-15

DIN 3538-1986

煤气装置阀. 止回阀, 内螺纹接头

Valves for gas installations; butterfly valves; female threaded ends

适用范围：This standard covers dimensions and designation of internally threaded butterfly valves for gas installations for gases to DVGW G 260 part 1 in sizes DN 15 to DN 50 for service pressure 4 bar and in si...

NF L24-146-2010

Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC.

EN 2870-1996

Aerospace Series. Bolts,Normal Bihexagonal Head,Close Tolerance Normal Shank,Short Thread,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1100 MPa (at Ambient Temperature) /315 Degrees C

实施日期：1996-07-01

NF L24-143-2006

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification : 1 550 MPa (at ambient temperature) / 315 oC.

DIN 13-23-2005

ISO常用米制螺纹 第23部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径53-110 mm

ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 53 mm to 110 mm nominal sizes...

实施日期：2005-08-01

DIN 968-2008

Cross recessed pan head tapping screws with collar

实施日期：2008-05-01

DIN EN 3304-1996

航空和航天.钛合金制、阳极氧化、MoS2润滑、小间隙、标准杆、短螺纹、100°沉孔螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at am...

适用范围：The document specifies the characteristics of screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubri...

DIN EN 3306-1996

航空和航天.100°沉孔、标准头、分叉十字凹口、全螺纹、钛合金制、氧化处理、MoS2润滑螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient tem...

适用范围：The document specifies the characteristics of screws, 100?countersunk normal head, offset cruciform-ribbed recess, threaded to head, in titanium alloy, MoS<(Index)2> lubricated, classification 1100 MPa...

BS EN 4499-2009

Luft-und Raumfahrt. 100 Senk-Pa?schrauben,mit kleinem Kopf,mit Flügelkreuzschlitz,kurzes Gewinde,aus Titanlegierung,anodisiert,mit Aluminium pigmenttete Beschichtung. Klasse:1100 MPa (bei Raumtemperatur) / 315 °C Aerospace series. Screws,100 Degree countersunk reduced head,offset cruciform recess,close tolerance normal shank,short thread,in titanium alloy,anodized,with aluminium pigmented coating. Classification:1 100 MPa (at ambient temperature) / 315 Degree C Série aérospatiale. Vis. tête frai

实施日期：2009-03-31

EN 2874-1996

Aerospace Series. Bolts,Large Bihexagonal Head,Close Tolerance Normal Shank,Medium Length Thread,in Heat Resisting Nickel Base Alloy,Passivated. Classification:1550 MPa (at Ambient Temperature) /315 Degrees C

实施日期：1996-07-01

ISO 8675-2012

带公制细牙螺纹的无倒角六角薄螺母（类型0）--产品等级A和B

Hexagon thin nuts chamfered (style 0) with metric fine pitch thread -- Product grades A and B

适用范围：ISO 8675:2012 specifies the characteristics of chamfered hexagon thin nuts (style 0), with metric fine pitch thread, with nominal thread diameters from 8 mm up to and including 64 mm, with product grad...

发布日期：2012-12-01  实施日期：2012-12-01

DIN EN ISO 8675-2001

六角薄螺母,米制细牙.产品等级A和B

Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000

DIN ISO 15552-2005

气压传动 具有可卸架的缸筒,1000 kPa(10 bar)系列 孔32 mm - 320 mm, 基本尺寸、安装尺寸和附件尺寸

Pneumatic fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions

适用范围：This International Standard specifies a method for the quantitative determination of the mineral oil(hydrocarbon) content in field-moist soil samples by gas chromatography.The method is applicable to m...

实施日期：2010-05-01

EN ISO 228-1-2003

Pipe threads where pressure-tight joints are not made on the threads. Part 1:Dimensions,tolerances and designation ISO 228-1:2000

实施日期：2003-02-26

DIN 13-24-2005

ISO通用米制螺纹 第24部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径112-180 mm

ISO metric screw threads; limits of sizes for fine screw threads within the range 112 to 180 mm nominal diameter, together with the commonly used tolerance classes

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 112 mm to 180 mm nominal size...

实施日期：2005-08-01

DIN 13-3-1999

ISO米制螺纹.螺距0.5mm；螺纹直径3.5～90mm的细牙螺纹.尺寸

ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm

适用范围：The document specifies nominal sizes.

DIN EN 4323-2006

航空和航天 二硫化钼阳极氧化钛合金TI-P64001制全螺纹六弧形齿100°沉头螺钉 等级:900 MPa(常温)/350℃

Aerospace series - Screws, 100?countersunk head, six lobe recess, threaded to head, in titanium alloy TI- P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350C...

实施日期：2006-03-01

DIN 65343-2002

航空和宇航 圆柱形深沉孔的具有MJ螺纹的铆接螺母、自锁、双耳,钢制 等级:1100MPa/235摄氏度

Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; classification: 1100 MPa/235 <Grad>C

DIN 34824-2007

12 point socket for bolts and screw

实施日期：2007-11-01