QJ 2083-1991

MJ螺纹紧固件1100MPa/235℃沉头螺栓

发布日期：1991-01-14  实施日期：1991-07-31

DIN 1445-2011

有头和螺纹

Clevis pins with head and threaded portion

适用范围：This standard applies to clevis pins with head and threaded portion consisting of metric screw threads and constant length of pins with nominal diameters d<down 1> range from 8 mm to 30 mm.

BS EN 14399-4-2005

Hochfeste planmaessig vorspannbare Schraubenverbindungen fuer den Metallbau. System HV. Garnituren aus Sechskantschrauben und-muttern High-strength structural bolting assemblies for preloading Part 4:System HV Hexagon bolt and nut assemblies Boulonnerie de construction metallique a haute resistance apte a la precontrainte. Systeme HV. Boulons a tete hexagonale (vis + ecrou)

实施日期：2005-10-24

BS EN ISO 10485-2004

螺母锥形保证载荷试验

Kegelpruefkraftversuch an Muttern Cone proof load test on nuts Essai de charge d'epreuve au cone des ecrous Supersedes BS 7597:1992

适用范围：Specifies under the conditions of the load test the properties of nuts with: nominal thread diameter from 5 mm up to 39 mm; product grades A and B; property classes 8 to 12.

实施日期：2004-08-06

BS EN 2144-1994

铝合金2117,英寸系列,实心,万能分度头铆钉

Vollniete,mit Universalkopf,aus Aluminiumlegierung 2117,Inch-Reihe Rivets,Solid,Universal Head,in Aluminium Alloy 2117,Inch Based Series (S) Rivets ordinaires. tete ronde aplatie,en alliage d'aluminium...

实施日期：1994-01-01

EN 14399-10-2009

High-strength structural bolting assemblies for preloading. Part 10:System HRC. Bolt and nut assemblies with calibrated preload

实施日期：2009-03-01

NF E25-400-8-2004

Cone proof load test on nuts.

ISO 898-1-2013

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

发布日期：2013-01-01  实施日期：2013-01-01

BS A 101-1969

Allgemeine Anforderungen an Titanbolzen. Spezifikation General Requirements for Titanium Bolts Normes generales pour boulons en titane. Specification Amd 2;

实施日期：1969-01-01

BS 5317-1976

米制长度量棒及其附件规范

Messstaebe metrischer Groesse und ihr Zubehoer Specification for Metric Length Bars and Their Accessories Etalons de longueur metrique. section cylindrique et leurs accessoires AMD 3052:June 1979

适用范围：Cylindrical length bars up to 1200 mm. Accuracy standards for 4 grades, reference, calibration, 1 and 2, and details of screwed connections. Essential features of design and accuracy for accessories co...

实施日期：1976-04-30

BS EN 2935-1996

NI-P101HT(Waspaloy)耐高温镍基合金制长螺纹薄柄T型头螺栓.等级:1210MPa(室温)/730℃

T-Kopfschrauben,Duennschaft,langes Gewinde,aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy),Klasse:1210 MPa (bei Raumtemperatur) / 730°C Bolts,T-Head,Relieved Shank,Long Thread,in Heat Resi...

适用范围：This standard specifies the characteristics of T-headed bolts with relieved shank, long thread, in NI-P101HT, for aerospace applications. Classification : 1 210 MPa <up1)> / 730 ℃ <up2)> note:1) Minim...

实施日期：1996-01-01

EN 2995-005-2006

Aerospace series. Circuit breakers,single-pole,temperature compensated,rated current 1 A to 25 A. Part 005:With polarized signal contact. Product standard

实施日期：2006-08-01

BS EN ISO 15481-1999

带攻丝螺纹的十字凹槽平头自攻螺钉

Flachkopf-Bohrschrauben mit Kreuzschlitz mit Blechschraubengewinde Cross Recessed Pan Head Drilling Screws with Tapping Screw Thread Vis autoperceuses a tete cylindrique bombee large a empreinte crucif...

适用范围：This International Standard specifies the characteristics of cross recessed pan head drilling screws with tapping screw threads from ST2,9 up to and including ST6,3.

实施日期：1999-11-15

NF L24-091-2009

Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification : 1 275 MPa/650 oC - Manufacturing method optional - Technical specification.

BS 1494-1-1964

建筑用固定件规范.第1部分:板材、屋面与墙壁覆盖层用固定件

Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings

适用范围：Hook bolts, nuts; drive screws; washers; self-tapping screws; roofing bolts, nuts, clips; roofing screws; sheeting clips. Materials (steel and aluminium), dimensions.

NF L58-630-006-2007

Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006 : With polarized signal contact - Bus-bar version - Product standard.

BS EN 3305-1997

镀镉合金钢制短螺纹紧公差标准柄翼型十字槽小于100°的埋头螺钉.等级:1100 MPa(室温)/235℃

100 Senk-Passschrauben mit kleinem Kopf,mit Fluegelkreuzschlitz,kurzes Gewinde,aus legiertem Stahl,verkadmet Klasse:1100 MPa (bei Raumtemperatur)/235°C Screws,100 Degrees Countersunk Reduced Head,Offse...

适用范围：This standard specifies the characteristics of screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classi...

实施日期：1997-02-15

GB/T 802.1-2008

组合式盖形螺母

Acorn nuts - Assembling type

适用范围：GB/T 802的本部分规定了螺纹规格为M4～M24、性能等级为6、8、A2-50、A2-70、A4-50、A4-70、CU2、CU3和AL4级、产品等级为A和B级的组合式盖形螺母。A级用于D≤16mm；B级用于D＞16mm的螺母。

发布日期：2008-08-25  实施日期：2009-02-01

ASTM F1941-2007

螺纹紧固件电镀层规格（统一英制螺纹（UN/UNR））

Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

适用范围：<p id="s00002">1.1 This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with unified inch screw threads. It specifies coa...

实施日期：2007-12-01

BS EN ISO 10669-1999

攻丝螺钉用平垫圈和垫圈组件.常规和大型系列.A级产品

Flache Scheiben fuer Kombi-Blechschrauben. Normale und grosse Reihe. Produktklasse A Plain Washers for Tapping Screw and Washer Assemblies-Normal and Large Series-Product Grade A Rondelles plates pour ...

适用范围：This International Standard specifies the characteristics of plain steel washers of product grade A for tapping screw and washer assemblies in accordance with ISO 10510.

实施日期：1999-11-15