DIN EN ISO 228-2-2003

非螺纹密封连接的管螺纹 第2部分:极限量规检验

Pipe threads where pressure-tight joints are not made on the threads Part 2: verification by means of limit gauges

适用范围：The standard specifies the verification of pipe threads by means of limit gauges.

JIS B3102-2001

螺纹极限量规的形状及尺寸

Gauge blanks for screw threads limit gauges

HB 4235-1989

ＭＪ螺纹量规技术条件

适用范围：本标准规定MJ螺纹量规的验收、标记、包装的技术条件及有关计算公式。　　本标准适用于检验MJ螺纹用的螺纹塞规、螺纹环规及其螺纹校对塞规。

发布日期：1989-05-12  实施日期：1989-12-01

NF E11-029-1991

钢量规.螺纹环.最大至300mm的直径

Steel gauges. Screw ring gauges. Diameter to 300 mm.

GB/T 8336-1998

气瓶专用螺纹量规

Special thread gauges for gas cylinders

适用范围：本标准规定了气瓶用螺纹量规的结构型式、尺寸偏差、技术要求、标志等内容。　　本标准适用于检验GB 8335-1998《气瓶专用螺纹》中规定的圆锥纹及圆住螺纹用的量规。

发布日期：1998-03-20  实施日期：1998-10-01

BS EN 148-1-1999

呼吸保护设备.面具用螺纹.标准螺纹连接

Atemschutzgeraete. Gewinde fuer Atemanschluesse. Rundgewindeanschluss Respiratory Protective Devices-Threads for Facepieces-Part 1:Standard Thread Connection Appareils de protection respiratoire. Filet...

适用范围：This European Standard is applicable to standard threads for respiratory protective devices. This standard does not apply to diving equipment and to positive pressure demand breathing apparatus.

实施日期：1999-07-15

CNS 525-1955

韦氏螺纹活动量规(通过端损磨检验用,精配,中配及粗配)

Adjustable Snap Gauge for Whitworth Thread (for Go End Limit and Wear Test Fine Medium and Coarse Fits)

发布日期：1955-09-24  实施日期：1955-09-24

CNS 535-1991

统一制粗螺纹限界量规

Limit Gages for Unified Coarse Screw Threads

发布日期：1955-09-24  实施日期：1991-10-18

ASME B47.1-2007

量规半成品

Gage Blanks

适用范围：Gage Blanks / Note: revision of ANSI/ASME B47.1-1988 (R2004) * Approved 2007-01-29.

实施日期：2007-01-01

DIN 40431-1-1970

钢制导线管螺纹. 螺纹量规; 过端和止端螺纹环规

Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Ga

适用范围：Steel Conduit thread ,Go gauge ringsBearbeitet vom VOE/FNE-Gemeinschaftsausschu? 0610-7/205.7

BS 4377-1991

螺纹镶齿金属丝锥进行孔攻丝的规范(ISO米制螺纹)

Tapping of Holes to Receive Wire Thread Inserts (ISO Metric Threads)

适用范围：Specifies limits of size for tapped holes to accomodate wire thread inserts to provide ISO metric thread sizes from M1.6 (1.6 mm diameter) to M39 (39 mm diameter) inclusive.

实施日期：1991-01-01

WJ 589-2003

引信与弹丸、底火与药筒连接螺纹的螺纹量规尺寸计算与公差

Dimension calculating and tolerance of gauge of connecting thread for fuze and bullet and primer and cartridge case

适用范围：本标准规定了蟪纹量规名称、代号、尺寸计算公式、公差及偏差。 本标准适用于检验WJ 588-2003中规定的螺纹用螺纹量规。

发布日期：2003-09-25  实施日期：2003-12-01

NF E11-032-1989

钢制规 光滑和螺纹,单头和双头塞规 直径４０到１００毫米

Gauges. Screw plug gauges (single and double-ended). Diameters from 1 mm to 100 mm.

CNS 538-1955

公制螺纹样圈之量柱及磨损量柱(通过端,精配,中配及粗配)

Inspection Plug Gauge for Metric Thread Ring Gauge (Go End Limit, Fine, Medium and Coarse Fits)

发布日期：1955-09-24  实施日期：1955-09-24

GB/T 4749-2003

石油钻具接头螺纹量规

Petroleum equipment-Thread gages for rotary shouldered connections

实施日期：2004-01-01

CNS 537-1992

测螺纹用三线规

Three Wires for Screw Thread Measuring

发布日期：1955-09-24  实施日期：1992-03-18

ASME B1.16M-1984

Gages and Gaging for Metric M Screw Threads Revision of ANSI B1.16-1972

实施日期：1984-01-01

DIN 2283-3-2001

几何产品规范(GPS).“止”端螺纹量规.第3部分:公称直径40mm至250mm的ISO米制螺纹的工作量规和检验量规,精密机械用标准尺寸

NOT GO workshop screw plug gauges and check plugs for ISO metric screw threads over 40 mm up to 250 mm nominal diameter, for use in precision engineering

GB 8336-1987

气瓶专用螺纹量规

ISO 1502-1996

ISO一般用途米制螺纹--量规和量规检验

ISO general-purpose metric screw threads -- Gauges and gauging

适用范围：Gives details for the manufacture and use of gauges for checking ISO general purpose metric screw threads. Specifies the features of gauges which are recommended for checking external and internal scre...

发布日期：1996-01-01  实施日期：1996-01-01