JIS R1631-1998

精细陶瓷的拉伸蠕变试验方法

Test method for tensile creep of fine ceramics

适用范围：この規格は，一定温度，一定荷重の連続的な条件の下で，機械部品，構造材料などの高強度材料として使用するファインセラミックスの高温引張りによるクリープのひずみ及び破断時間を測定する方法について規定する。

DIN EN 978-1997

玻璃纤维增强(GRP)塑料制地下油罐.蠕变系数α和老化系数β的测定

Underground tanks of glass-reinforced plastics (GRP) - Determination of creep factor <alpha> and factor <beta>; German version EN 978:1997

适用范围：This document specifies a test method for the determination of the factor <alpha> and the factor <beta> of tanks of glass reinforced thermosetting resins for the underground storage of liquids.

ISO/TR 20432-2007

土壤加固用土工合成材料的长期强度测定指南

Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement

适用范围：ISO/TR 20432:2007 provides guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement. ISO/TR 20432:2007 describes a method of deriving reduction factors for geo...

发布日期：2007-12-01  实施日期：2007-12-01

ISO 17456-2006

塑料管道系统 多层管道 长期强度的测定

Plastics piping systems -- Multilayer pipes -- Determination of long-term strength

适用范围：ISO 17456:2006 specifies two alternative methods for determining the long-term hydrostatic strength of multilayer pipes: a calculation method applicable to multilayer P pipes (all polymer layers) and a...

发布日期：2006-09-01  实施日期：2006-09-01

ISO 899-1-2003

塑料 蠕变的测定 第1部分:拉伸蠕变

Plastics -- Determination of creep behaviour -- Part 1: Tensile creep

适用范围：ISO 899-1:2003 specifies a method for determining the tensile creep of plastics in the form of standard test specimens under specified conditions such as those of pretreatment, temperature and humidity...

发布日期：2003-06-01  实施日期：2003-06-01

BS EN ISO 13479-2009

流体传输用聚烯烃管.抗破裂扩展性的测定.有凹口的管上裂纹缓慢增长的试验方法(切口试验)

Rohre aus Polyolefinen für den Transport von Fluiden. Bestimmung des Widerstandes gegen Ri?fortpflanzung. Prüfverfahren für langsames Ri?wachstum an gekerbten Rohren (Kerbprüfung) Polyolefin pipes for ...

适用范围：This International Standard specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms of time to failure in a hydrostatic pressure test on a pi...

实施日期：2009-11-30

DIN EN ISO 1167-3-2008

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components

实施日期：2008-02-01

ISO/TR 20432 CORR 1-2008

Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement technical corrigendum 1 first edition

实施日期：2008-11-01

BS EN 13170-2008

电子元器件质量评定协调体系.分规范:直流电流用有薄层金属箔和一聚碳酸酯薄膜电介质电极的固定电容器

Thermal insulation products for buildings. Factory made products of expanded cork (ICB). Specification

适用范围：This European Standard specifies the requirements for factory made products of expanded cork, which areused for the thermal insulation of buildings. The products are made with granulated cork agglomera...

实施日期：2009-05-31

DIN CEN/TS 15325-2008

Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

实施日期：2008-04-01

EN ISO 9967-2007

热塑性塑料管.蠕变比的测定

Thermoplastics pipes. Determination of creep ratio

实施日期：2007-11-01

BS DD CEN/TS 15658-2007

Hochleistungskeramik. Mechanische Eigenschaften von Keramikfasern bei hohen Temperaturen in einer reaktionsfreien Umgebung. Bestimmung des Kriechverhaltens im Hei?verbindungsverfahren Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by the hot end method Céramiques techniques avancées. Propriétés mécaniques des fibres céramiques. haute température sous environnement non réactif. Détermination

实施日期：2007-10-31

DL/T 551-1994

低合金耐热钢蠕变孔洞检验技术工艺导则

The Technical Guidelines for the Creep Cavity Inspection of Low Alloy Heat Resistant Steels

发布日期：1994-08-03  实施日期：1994-12-01

EN 1902-1999

Adhesives. Test Method for Adhesives for Floor Coverings and Wall Coverings. Shear Creep Test

实施日期：1999-09-01

EN 12697-46-2012

Bituminous mixtures. Test methods for hot mix asphalt. Part 46:Low temperature cracking and properties by uniaxial tension tests

实施日期：2012-05-01

GB/T 11546.1-2008

塑料 蠕变性能的测定 第1部分：拉伸蠕变

Plastic - Determination of creep behaviour - Part 1: Tensile creep

适用范围：GB/T 11546的本部分规定了在预处理、温度和湿度等给定条件下测定塑料标准试样拉伸蠕变的方法。　　本部分规定的方法适用于硬质和半硬质的非增强、填充和纤维增强的塑料材料(定义见GB/T 2035-2008)，适用于直接模塑的哑铃形试...

发布日期：2008-08-04  实施日期：2009-04-01

BS PAS 26-1998

加油站前部区域和人行道区域用检查井盖 要求,性能和标志

Schachtabdeckungen zum Gebrauch bei Tankstellenvorplaetzen und Buergersteigen. Anforderungen,Betrieb und Kennzeichnung Manhole Tops Intended for Use on Service Station Forecourts and Pavement Areas-Req...

适用范围：Manholes, Filling stations, Paved areas, Performance, Performance testing, Marking, Composite materials, Plastics, Hardness, Tensile strength, Fire resistance, Chemical-resistance tests, Oil-resistance...

实施日期：1998-10-15

NF T54-900-2012

Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.

ISO 11403-1-2001

塑料 可比多点数据的采集和表示 第1部分:机械性能

Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties

发布日期：2001-12-01  实施日期：2001-12-01

EN 15381-2008

Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays

实施日期：2008-08-01