NF H44-033-1986

气雾剂发生器 玻璃容器 １３毫米瓶口尺寸

Aerosols dispensers. Glass containers. Dimensions of finish 13 mm.

EN ISO 13366-2-2006

Milk. Enumeration of somatic cells. Part 2:Guidance on the operation of fluoro-opto-electronic counters ISO 13366-2:2006

实施日期：2006-10-01

DIN EN 2267-008-2006

航空和航天 普通电线 工作温度-55℃ - 260℃ 第008部分:DM系列,紫外线激光可印字的单芯和多芯线 产品标准

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 鳦 and 260 鳦 - Part 008: DM family, single UV laser printable and muticore assembly - Product standard

适用范围：This Standard specifies the characteristics of UV laser printable electrical lightweight cables DM family for use in the on-board electrical systems of aircraft at operating temperatures between -55 ?a...

实施日期：2006-05-01

DIN 8326-1-1988

石英小表;要求,检验,标记

Quartz wrist watches; requirements, testing, marking

适用范围：This standard refers to watches and movements of watches with a quartz resonator.

DIN 4983-2004

矩形杆刀夹和转位刀架 标记结构

Tool holders with rectangular shank and cartridges for indexable inserts - Presentation of the designation

适用范围：The specifications of this standard apply to the designation of standardized and non-standardized tool holders with rectangular shank and of cartridges intended for the mounting of indexable inserts ma...

JB/T 8214.1-1999

QDZ气动单元组合仪表 调节器

QDZ process pneumatic control system--Controller

实施日期：2000-01-01

BS EN 1062-7-2004

色漆和清漆.外部砖石建筑和混凝土用覆层材料和涂覆系统.测定裂缝遮避特性

Beschichtungsstoffe. Beschichtungsstoffe und Beschichtungssysteme fuer mineralische Substrate und Beton im Aussenbereich. Bestimmung der rissueberbrueckenden Eigenschaften Paints and varnishes Coating ...

适用范围：To be read in conjunction with BS EN 1062-1:1997, prEN 1504-2

实施日期：2004-05-28

NF C32-041-2005

Non electrical test methods for low voltage energy cables.

NF Z52-025-2006

Geographic information - Services.

EN ISO 18279-2003

Brazing. Imperfections in brazed joints ISO 18279:2003

实施日期：2003-08-01

SJ/Z 9162-1987

手表用３２ＫＨｚ石英晶体元件的测量方法、试验方法和标准值

Measurements and test methods and standard values for 32kHz quartz crystal units for wrist watches ...

实施日期：1988-01-06

EN ISO 18856-2005

Water quality. Determination of selected phthalates using gas chromatography/mass spectrometry ISO 18856:2004

实施日期：2005-08-01

NF S54-005-1-2013

Child use and care articles - Changing units for domestic use - Part 1 : safety requirements

NF C93-112-19-2006

Fixed capacitors for use in electronic equipment - Part 19 : sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors.

NF A20-420-1987

Iron ores. Determination of manganese content. Periodate spectrophotometric method.

NF T35-507-7-1997

色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第7部分:湿度的测定

Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 7 : determination of moisture.

DIN EN ISO 4628-5-2004

色漆和清漆 漆膜降解的评定 一般性缺陷程度,量值和大小及均匀变化程度的规定 第５部分:剥落等级的评定

Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking ...

适用范围：This part of ISO 4628 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards and using the designation system defined in ISO 4628-1.

IEC 60068-3-2-1976

基本环境试验规程 第3-2部分:背景资料 第2节:温度/低气压组合试验

Basic environmental testing procedures - Part 3-2: Background information - Combined temperature/low air pressure tests

适用范围：Gives background information for Test Z/AM: Combined cold/low air pressure tests (IEC 68-2-40), and Test Z/BM: Combined dry heat/low air pressure tests (IEC 68-2-41).

发布日期：1976-01-01  实施日期：1976-01-01

GB/T 7353-1999

工业自动化仪表盘、柜、台、箱

Panel,cabinet,console and case for industrial-process measurement and control equipment

适用范围：本标准规定了工业自动化仪表盘、柜、台、箱的型式、基本尺寸、安装尺寸、技术要求、实验方法、检验规则、标志等。　 本标准适用于工业生产过程自动控制装置中各类工业自动化仪表盘、柜、台、箱，其他自动控制装置中的仪表盘、柜、台、箱...

发布日期：1999-11-11  实施日期：2000-05-01

NF A36-231-2-2013

Hote-rolled flat products made of high yield strength steels for cold forming - Part 2 : technical delivery conditions for thermomechanically rolled steels