DIN EN 2536-1995

航空和航天.铝合金的硬阳极氧化

Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995

EN 3307-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

DIN EN 3727-2007

Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification; German and English version EN 3727:2006

实施日期：2007-04-01

NF L22-292-1979

全螺纹开槽６０°埋头螺钉 ISO 螺纹

Slotted 60 degrees countersunk head screws, fully threaded. ISO thread.

ISO 8504-2-2000

涂装油漆和有关产品前钢材预处理 表面预处理方法 第2部分:磨料喷射清理

Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning

适用范围：This part of ISO 8504 describes abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It also contains information on the effectiveness ...

发布日期：2000-03-01  实施日期：2000-03-01

DIN 65260-1989

航空和航天.100°米制系列铝和铝合金通用铆钉

Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, surface treatment, marking and technical specifications.#,,#

DIN EN 47 Berichtigung 1-2008

Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) Corrigendum 1 to English version of DIN EN 47:2005-06

发布日期：2008-03-01  实施日期：2008-03-01

EN 2550-1992

Aerospace Series. Rivets,Solid,100 Degrees Normal Countersunk Head,in Aluminium 1050A,Inch Based Series

实施日期：1992-01-01

BS EN 20-1-1992

木材防腐剂.对竹粉蠹虫(lycuts)预防作用的测定.利用表面处理法(实验室法)

Holzschutzmittel. Bestimmung der vorbeugenden Wirkung gegenueber Lyctus brunneus (Stephens). Oberflaechenbehandlung (Laboratoriumsverfahren) Wood Preservatives-Determination of the Protective Effective...

适用范围：Can also be used to determine toxic values.

实施日期：1992-01-01

EN 4111-2006

Aerospace series. Wrenches,splined,socket for pipe fittings. Technical specification

实施日期：2006-05-01

DIN 65046-1-2010

Aerospace - Methods of test for surface protective coatings; Paints and varnishes - Part 1: Survey and identifications

实施日期：2010-10-01

NF L24-146-2010

Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC.

NF C73-854-2009

Household and similar electrical appliances - Safety - Part 2-54 : particular requirements for surface-cleaning appliances for household use employing liquids or steam.

EN 2870-1996

Aerospace Series. Bolts,Normal Bihexagonal Head,Close Tolerance Normal Shank,Short Thread,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1100 MPa (at Ambient Temperature) /315 Degrees C

实施日期：1996-07-01

EN ISO 8993-2010

Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method

实施日期：2010-08-01

NF L24-143-2006

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification : 1 550 MPa (at ambient temperature) / 315 oC.

NF L24-477-2008

Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification : 1100 MPa (at ambient temperature)/235 oC.

GB 7693-1987

涂装作业安全规程 涂漆前处理工艺通风净化

DIN EN 3304-1996

航空和航天.钛合金制、阳极氧化、MoS2润滑、小间隙、标准杆、短螺纹、100°沉孔螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at am...

适用范围：The document specifies the characteristics of screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubri...

DIN EN 3306-1996

航空和航天.100°沉孔、标准头、分叉十字凹口、全螺纹、钛合金制、氧化处理、MoS2润滑螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient tem...

适用范围：The document specifies the characteristics of screws, 100?countersunk normal head, offset cruciform-ribbed recess, threaded to head, in titanium alloy, MoS<(Index)2> lubricated, classification 1100 MPa...