EN ISO 4628-2-2003

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects,and of intensity of uniform changes in appearance. Part 2:Assessment of degree of blistering ISO 4628-2:2003

实施日期：2003-09-01

DIN EN 12691-2006

防水卷材 防水沥青、塑料和橡胶卷材 耐冲击测定

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact

适用范围：This European Standard specifies a test for puncture by impact on sheets for roof waterproofing. Mechanical stress on waterproofing sheets ranges from static long-term loads to dynamic short-term loads...

实施日期：2006-06-01

BS EN 60424-4-2001

铁氧体磁芯 表面缺陷极限指南 第4部分:环状芯

Ferritkerne. Leitfaden fuer Grenzwerte von sichtbaren Beschaedigungen der Kernoberflaeche. Ringkerne Ferrite Cores-Guide on the Limits of Surface Irregularities Part 4:Ring Cores Noyaux ferrites. Guide...

适用范围：Used for negotiation between ferrite core manufacturers and customers about surface irregularities.

实施日期：2001-08-15

BS EN ISO 10545-2-1997

瓷砖.表面质量和尺寸的测定

Keramische Fliesen und Platten. Bestimmung der Masse und der Oberflaechenbeschaffenheit Ceramic tiles. Part 2:Determination of dimensions and surface quality Cerreaux et dalles ceramiques. Determinatio...

适用范围：This part of ISO 10545 specifies methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity, surface flatness) and the surface quality of c...

实施日期：1997-11-15

DIN EN 60068-2-82-2007

Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components (IEC 60068-2-82:2007)

实施日期：2007-12-01

BS EN 10149-2-2013

Hot rolled flat products made of high yield strength steels for cold forming Part 2: Technical delivery conditions for thermomechanically rolled steels

发布日期：2013-09-30  实施日期：2013-09-30

NF L21-110-1975

铆钉用 T４０非合金钛线材 技术规范

Wires for rivets in T40 pure titanium. Technical specification.

实施日期：1975-09-01

JIS K5600-8-5-1999

涂料一般试验方法－第8部分:漆膜剥蚀的评定－第5节:剥落程度

Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 5: Designation of degree of flaking

GB/T 9634.4-2007

铁氧体磁心表面缺陷极限导则 第4部分：环形磁心

Ferrite cores-Guide on the limits of surface irregularities-Part 4:Ring-cores

适用范围：本部分规定了符合相关总规范的环形磁心的表面缺陷允许极限导则。　　本部分在磁心制造厂和用户之间有关表面缺陷的协调中可作为分规范使用。

发布日期：2007-02-09  实施日期：2007-09-01

BS EN ISO 28199-3-2009

Beschichtungsstoffe. Beurteilung von applikationsbedingter Eigenschaften von Beschichtungssystemen. Visuelle Beurteilung von Ablaufneigung,Kocherbildung,Nadelstichbildung und Deckverm?gen Paints and varnishes. Evaluation of properties of coating systems related to the application process Part 3:Visual assessment of sagging,formation of bubbles,pinholing and hiding power Peintures et vernis. ?valuation des propriétés des systèmes de revêtement liées au mode d'application. ?valuation visuelle du f

实施日期：2009-11-30

BS EN 2070-7-1991

铝和铝合金锻制品规范.技术规范.锻坯

Halbzeug aus Aluminium und Aluminium-Knetlegierungen. Technische Lieferbedingungen. Schmiedevormaterial Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 7:Wrought Forging Sto...

适用范围：To be read in conjunction with BS EN 2070-1

实施日期：1991-01-01

BS 4966-1991

炼焦炉用硅质耐火材料规范

Silica Refractories for Use in Coke Ovens

适用范围：Chemical and physical properties, and tolerances on dimensions and defects, for refractories of not less than 93% silica.

实施日期：1991-01-01

BS 3831-1964

Specification for vitreous enamel finishes for domestic and catering appliances

BS 1429-1980

一般工程弹簧用的退火圆钢丝规范

Spezifikation fuer gegluehten runden Stahldraht fuer allgemeine Maschinenfedern Specification for Annealed Round Steel Wire for General Engineering Springs Specification pour le fil d'acier recuit rond...

适用范围：Requirements for annealed or annealed and lightly drawn wire suitable for the manufacture of mechanical springs by cold forming, that are subsequently hardened and tempered.

实施日期：1980-09-30

EN ISO 4628-4-2003

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects,and of intensity of uniform changes in appearance. Part 4:Assessment of degree of cracking ISO 4628-4:2003

实施日期：2003-09-23

DIN EN 10149-2-1995

冷加工用高屈服强度钢热轧平板.第2部分:热机械轧钢的交货条件

Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels; German version EN 10149-2:1995

适用范围：The document describes delivery conditions for thermomechnical rolled steels.

BS 6374-4-1984

加工工业用聚合材料制的设备衬套.第4部分:冷固化处理的热固性树脂制衬套规范

Auskleidung von betriebstechnischen Anlagen in der verarbeitenden Industrie mit Polymerstoffen. Auskleidungen aus kaltaushaertenden Harzen Lining of Equipment with Polymeric Materials for the Process I...

适用范围：Specifies requirements for the design and fabrication of equipment to be lined and, the application and inspection of the lining along with provisions for any repairs. It applies to cold curing thermos...

实施日期：1984-01-01

BS EN 60352-1-1998

无焊连接.环绕连接.一般要求、试验方法和实用指南

Loetfreie Verbindungen. Wickelverbindungen. Allgemeine Anforderungen,Pruefverfahren und Anwendungshinweise Solderless Connections-Part 1:Wrapped Connections-General Requirements,Test Methods and Practi...

适用范围：Applies to wrapped connections made with single solid round wires with nominal diameters of 0.16 mm minimum and appropriately designed posts for use in telecommunications equipment and in electronic de...

实施日期：1998-01-15

BS M 39-1972

Method for penetrant inspection of aerospace materials and components

DIN EN 1369-1997

铸造.磁粒检测

Founding - Magnetic particle inspection; German version EN 1369:1996

适用范围：The document aplies to the magnetic particle inspection of ferromagnetic iron and steel castings. It also gives acceptance criteria through severity levels defined by the nature, the area and the dimen...