DIN EN ISO 8502-4-1999

涂料及有关制品在应用前钢基体的预加工.评定表面清洁度的试验.第4部分:涂料使用前凝固概率的估算手册

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensati...

适用范围：The document gives guidance on the estimation of the probability of condensation on a surface to be painted. It may be used to establish whether conditions at the job site are suitable for painting or ...

EN ISO 11126-9-2004

Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 9:Staurolite ISO 11126-9:1999

实施日期：2004-12-01

DIN EN 10346-2009

Continuously hot-dip coated steel flat products - Technical delivery conditions

实施日期：2009-07-01

EN ISO 11125-5-1997

Preparation of Steel Substrates before Application of Paints and Related Products. Test Methods for Metallic Blast-Cleaning Abrasives. Part 5:Determination of Percentage Defective Particles and of Microstucture ISO 11125-5:1993

实施日期：1997-06-01

DIN EN ISO 11124-1-1997

油漆和有关制品应用前金属衬底的制备.金属喷射清洁的磨料规范.第1部分:一般介绍和分类

Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1...

适用范围：The document describes a classification of metallic blast-cleaning abrasives for the preparation of steel substrates before application of paints and related products. It specifies the characteristics ...

EN ISO 8501-1-2007

Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel subtrates after overall removal of previous

实施日期：2007-01-01

EN ISO 8501-3-2007

Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 3:Preparation grades of welds,edges and other areas with surface imperfections

实施日期：2007-07-01

BS EN ISO 11125-3-1994

Vorbereitung von Stahloberflaechen vor dem Auftragen von Beschichtungsstoffen. Pruefverfahren fuer metallische Strahlmittel. Bestimmung der Haerte Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives Part 3: Determination of Hardness Preparation des subjectiles d'acier avant application de peintures et de produits assimiles. Methodes d'essai pour abrasifs metalliques destines a la preparation par projection. Determ

ISO 11124-1-1993

涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分:一般介绍及分类

Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification

适用范围：Describes a classification and specifies the characteristics which are required for the complete designation of such abrasives. Applies to abrasives supplied in the "new" or unused condition only. Does...

发布日期：1993-12-01  实施日期：1993-12-01

BS EN ISO 16276-1-2007

Beschichtungsstoffe. Korrosionsschutz von Stahlbauten durch Beschichtungssysteme. Beurteilung der Adh?sion/Koh?sion (Haftfestigkeit) einer Beschichtung und Kriterien für deren Annahme Abrei?versuch Corrosion protection of steel structures by protective paint systems. Assessment of,and acceptance criteria for,the adhesion/cohesion (fracture strength) of a coating. Part 1:Pull-off testing Anticorrosion des structures en acier par systèmes de peinture. ?valuation et critères d'acceptation de l'adhé

实施日期：2007-06-29

DIN EN ISO 8502-9-2001

钢基体涂漆之前的准备.表面清洁度评定试验.第9部分:水溶盐的导电率测定用现场方法

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-...

适用范围：The document describes a field method for the assessment of the total surface density of various water-soluble salt (mostly chlorides and sulfates) on steel surfaces before and/or after surface prepara...

BS ISO 10844-2011

Akustik. Anforderungen an Prüfstrecken zur Messung der Ger?uschemission von Stra?enfahrzeugen und deren Reifen Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres Acoustique. Spécification des surfaces d'essai pour le mesurage du bruit émis par les véhicules routiers et leurs pneumatiques

实施日期：2011-02-28

DIN EN 14127-2011

Non-destructive testing. Ultrasonic thickness measurement; German version EN 14127:2011

BS EN 10329-2006

Stahlrohre und-formstuecke fuer erd-und Wasserverlegte Rohrleitungen. Umhuellungen fuer Schweissverbindungen Steel tubes and fittings for onshore and offshore pipelines External field joint coatings Tubes et raccords en acier pour canalisations enterrees et immergees. Revetements externes des assemblages realises sur site

实施日期：2006-02-14

NF T35-502-5-2005

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5 : measurement of chloride on steel surfaces prepared for painting (ion detection tube method).

DIN EN 2334-1997

航空和航天.铝和铝合金的硫酸铬酸洗

Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997

DIN EN ISO 11125-2-1997

油漆和有关制品应用前金属衬底的制备.金属喷丸的试验方法.第2部分:粒子大小分布的测定

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2...

适用范围：The document specifies a test method for the determination of particle size distribution of blast-cleaning abrasives by sieving.

DIN EN ISO 9934-1-2002

无损检测.磁粒检测.第1部分:总则

Non-destructive testing - Magnetic particle testing - Part 1: General principles

发布日期：2002-03-01  实施日期：2002-03-01

EN ISO 16276-2-2007

Corrosion protection of steel structures by protective paint systems. Assessment of,and acceptance criteria for,the adhesion/cohesion (fracture strength) of a coating. Part 2:Cross-cut testing and X-cut testing

实施日期：2007-05-01

NF L06-836-2010

Aerospace series - Blast media - White corundum.