EN 60793-1-40-2003

Optical fibres Part 1-40: Measurement methods and test procedures Attenuation

EN 61558-2-19-2001

Safety of Power Transformers, Power Supply Units and Similar Devices Part 2-19: Particular Requirements for Perturbation Attenuation Transformers IEC 61558-2-19:2000

DIN EN 12503-4-2013

Sports mats - Part 4: Determination of shock absorption; German version EN 12503-4:2013

发布日期：2013-11-01  实施日期：2013-11-01

EN 61300-3-34-2009

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors

BS EN 61280-4-2-2000

光纤通信分系统基本试验程序.光纤电缆性能指标.单模光纤电缆性能指标的衰减

Lichtwellenleiter-Kommunikations-untersysteme Grundlegende Pruefverfahren. Lichtwellenleiter-Kabelanlagen. Daempfungsmessung in Einmoden-LWL-Kabelanlagen Fibre Optic Communication Subsystem Basic Test ...

适用范围：The purpose of this part of IEC 61280 is to describe procedures to measure the optical attenuation (loss) performance of installed single-mode fibre optic cable plants. It is neither intended for compo...

实施日期：2000-03-15

DIN EN 61300-2-40-2001

光纤互连装置的无源元件.基本试验和测量程序.第2-40部分:试验;单模变角光连接器衰减的屏蔽试验

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-40: Tests; Screen testing of attenuation of single-mode tuned angled optical connectors (IEC ...

适用范围：The document describes the test for screening single-mode tuned connectors against tuning errors. It is applicable to single-mode angled connectors which are equipped with a tuning mechanism. The test ...

实施日期：2001-10-01

IEC 61300-3-45-2011

纤维光学互连器件和无源器件 基本试验和测量程序 第3-45部分:检查和测量 随机配对的复型纤维连接器的衰减

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors

适用范围：IEC 61300-3-45:2011 describes the procedure required to measure the statistical distribution and mean attenuation for random mated optical connectors with physical contact (PC) and angled physical cont...

发布日期：2011-05-12  实施日期：2011-05-12

BS EN 61280-4-1-2009

Fibre optic communication subsystem test procedures. Installed cable plant. Multimode attenuation measurement

实施日期：2010-01-31

IEC 60793-1-40-2001

光纤 第1-40部分:测量方法和试验规程 衰减

Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation

适用范围：Establishes uniform requirements for measuring the attenuation of optical fibres. Four methods are described: (a) cut-back, (b) insertion loss, (d) backscattering, (d) modelling spectral attenuation. M...

发布日期：2001-07-26  实施日期：2001-07-26

IEC 61280-4-1-2009

纤维光学通信子系统试验程序 第4-1部分:已安装的电缆设施 多模衰减测量

Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement

适用范围：IEC 61280-4-1:2009 is applicable to the measurement of attenuation of installed fibre-optic cabling using multimode fibre, typically in lengths of up to 2 000 m. This cabling can include multimode fibr...

发布日期：2009-06-10  实施日期：2009-06-10

IEC 60793-1-47-2009

光纤 第1-47部分:测量方法和试验规程 宏弯曲损耗

Optical fibres. Part 1-47:Measurement methods and test procedures. Macrobending loss Edition 3.0

适用范围：This part of IEC 60793 establishes uniform requirements for measuring the macrobendingloss of single-mode fibres (category B) at 1 550 nm or 1 625 nm, category A1 multimodefibres at 850 nm or 1 300 nm,...

发布日期：2009-03-05  实施日期：2009-03-01

EN 61280-4-1-2009

Fibre optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement

BS EN 12503-4-2013

Sports mats Part 4: Determination of shock absorption

发布日期：2013-07-31  实施日期：2013-07-31

IEC 61280-4-2-1999

纤维光学通信子系统基本试验程序 第4-2部分:光缆设施 单模光缆设施衰减

Fibre Optic Communication Subsystem Basic Test Procedures. Part 4-2:Fibre Optic Cable Plant. Single-Mode Fibre Optic Cable Plant Attenuation Procedures D′Essai De Base Des Sous-Systemes De Telecommunic...

适用范围：The purpose of this part of IEC 61280 is to describe procedures to measure the optical attenuation (loss) performance of installed single-mode fibre optic cable plants. It is neither intended for compo...

实施日期：1999-08-01

IEC 62614-2010

纤维光学 多模衰减测量用发射条件要求

Fibre optics - Launch condition requirements for measuring multimode attenuation

适用范围：IEC 62614:2010 describes the launch condition requirements used for measuring multimode attenuation in passive components and in installed cable plants. In this standard, the fibre types that are addre...

发布日期：2010-07-22  实施日期：2010-07-22

DIN EN 61300-3-34-2009

纤维光学互连器件和无源器件 基本试验和测量程序 第3-34部分:检查和测量 随机配接连接器的衰减

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors

实施日期：2009-09-01

DIN EN 60793-1-47-2010

光纤 第1-47部分:测量方法和试验规程 宏弯曲损耗

Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss

适用范围：This part of IEC 60793 establishes uniform requirements for measuring the macrobending loss of single-mode fibres (category B) at 1550 nm or 1625 nm, category A1 multimode fibres at 850 nm or 1300 nm, ...

实施日期：2010-02-01

EN 12503-4-2001

Sports Mats. Part 4:Determination of Shock Absorption

实施日期：2001-04-01

BS EN 62614-2010

Lichtwellenleiter. Anforderungen an die Anregungsbedingungen für Mehrmoden-D?mpfungsmessungen Fibre optics-Launch condition requirements for measuring multimode attenuation Fibres optiques. Exigences des conditions d'injection pour la mesure de l'affaiblissement en multimodal

实施日期：2010-11-30

DIN EN 61280-4-1-2004

纤维光学通信子系统试验程序 第4-1部分:电缆设施和连接多模纤维光缆设施衰减测量

Fibre optic communication subsystem test procedures - Part 4-1: Cable plant and links - Multimode fibre-optic cable plant attenuation measurement

适用范围：This part of IEC 61280 establishes preferred measurement principles and practices to assure that meaningful data descripbing the optical loss performance of installed cable plants can be obtained. It i...

实施日期：2004-12-01