BS EN 13395-3-2002

混凝土结构产品和系统保护和修理-试验方法-使用性测定-第3部分:修补混凝土流程试验

Produkte und Systeme fuer den Schutz und die Instandsetzung von Betontragwerken. Pruefverfahren. Bestimmung der Verarbeitbarkeit. Pruefung des Fliessverhaltens von Beton Products and Systems for the Pr...

实施日期：2002-07-31

NF T37-001-7-2001

Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test).

NF A05-502-1-2008

Corrosion of metals and alloys - Corrosion fatigue testing - Part 1 : cycles to failure testing.

JIS Z3157-1993

U形焊接抗断裂试验方法

Method of U-groove weld cracking test

BS 6374-5-1985

加工工业用聚合材料制的设备衬套.第5部分:橡胶制衬套规范

Auskleidung von betriebstechnischen Anlagen in der verarbeitenden Industrie mit Polymerwerkstoffen. Gummiauskleidungen Lining of Equipment with Polymeric Materials for the Process Industries Part 5:Lin...

实施日期：1985-01-01

EN 13395-4-2002

Products and Systems for the Protection and Repair of Concrete Structures. Test Methods. Determination of Workability. Part 4:Application of Repair Mortar Overhead

实施日期：2002-05-01

EN ISO 13937-3-2000

纺织品 织物撕裂特性 翼形试样撕裂力的测定(单撕裂法)

Textiles. Tear Properties of Fabrics. Part 3:Determination of Tear Force of Wing-Shaped Test Specimens (Single Tear Method) ISO 13937-3:2000

实施日期：2000-04-01

EN 13523-6-2002

Coil Coated Metals. Test Methods. Part 6:Adhesion After Indentation (Cupping Test)

实施日期：2002-07-01

BS ISO 17281-2002

塑料 在较高负荷速率下(1 m/s)对断裂韧性(Gic和Kic)的测定

Kunststoffe. Bestimmung der Risszaehigkeit (Gic und Kic) bei maessig hohen Beanspruchungsgeschwindigkeiten (1 m/s) Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading ...

实施日期：2002-11-22

EN 12636-1999

Products and Systems for the Protection and Repair of Concrete Structures. Test Methods. Determination of Adhesion Concrete to Concrete

实施日期：1999-05-01

EN 13395-2-2002

Products and Systems for the Protection and Repair of Concrete Structures. Test Methods. Determination of Workability. Part 2:Test for Flow of Grout or Mortar

实施日期：2002-05-01

ISO 22282-2-2012

岩土工程勘察和测试 地液压测试 第2部分:用开放系统在钻孔中进行渗水性试验

Geotechnical investigation and testing -- Geohydraulic testing -- Part 2: Water permeability tests in a borehole using open systems

发布日期：2012-06-01  实施日期：2012-06-01

BS EN 10028-2-2009

压力容器用的钢板制品规范.第2部分:具有规定的耐高温性能的非合金钢和合金钢

Flacherzeugnisse aus Druckbeh?lterst?hlen. Unlegierte und legierte St?hle mit festgelegten Eigenschaften bei erh?hten Temperaturen Flat products made of steels for pressure purposes Part 2:Non-alloy an...

实施日期：2009-06-30

ASTM G186-2005

测定气体漏泄检测仪液态溶液是否会造成黄铜合金应力腐蚀开裂的试验方法

Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

实施日期：2005-07-01

BS 6886-1987

炼焦炉用硅酸铝耐火材料规范

Feuerfeste Stoffe aus Aluminiumsilikat zur Verwendung in Koksoefen Specification for Alumino-Silicate Refractories for Use in Coke Ovens Refractaires. base de silicate alumineux pour fours. coke. Speci...

实施日期：1987-09-30

EN ISO 11782-2-2008

Corrosion of metals and alloys. Corrosion fatigue testing. Part 2:Crack propagation testing using precracked specimens

实施日期：2008-04-01

DIN EN 13763-6-2004

民用炸药 雷管和引线 第6部分:引线绝缘耐低温开裂的测定

Explosives for civil uses - Detonators and relays - Part 6: Methods for the determination of resistance to cracking in low temperatures of leading wires

BS ISO 1431-1-2004+A1-2009

Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing

实施日期：2004-11-01

ASTM D661-1993(2005)

评价外用漆破裂程度的试验方法

Standard Test Method for Evaluating Degree of Cracking of Exterior Paints

实施日期：1993-05-15

EN ISO 4628-4-2003

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects,and of intensity of uniform changes in appearance. Part 4:Assessment of degree of cracking ISO 4628-4:2003

实施日期：2003-09-23