BS ISO 6162-1-2012

液压传动 带有分体或整体式法兰夹和米制或英制螺钉的法兰接头 3.5 MPa(35巴)至35 MPa(350巴）、DN13-DN127压力下使用的法兰接头

Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors,ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 M...

发布日期：2012-12-31  实施日期：2012-12-31

SJ 20400-1994

低副辨平板裂缝天线性能近场测试方法

Methods of near-field measurement for planar waveguide-fed slot arrays with low sidelobes

发布日期：1994-09-30  实施日期：1994-12-01

NF A05-502-1-2008

Corrosion of metals and alloys - Corrosion fatigue testing - Part 1 : cycles to failure testing.

NF L16-012-2008

Aerospace series - Paints and varnishes -Test method for measurement of resistance to cold crack temperature cycle.

EN ISO 11782-2-2008

Corrosion of metals and alloys. Corrosion fatigue testing. Part 2:Crack propagation testing using precracked specimens

实施日期：2008-04-01

JG/T 264-2010

混凝土裂缝修复灌浆树脂

Grouting resin for concrete crack

发布日期：2010-03-23  实施日期：2010-07-01

ASTM E6-2009be1

有关机械测试方法的术语

Standard Terminology Relating to Methods of Mechanical Testing

实施日期：2009-05-15

DIN 743-1-2000

轴.负荷计算.第1部分:通用基础

Shafts and axles, calculation of load capacity - Part 1: General basics

ASTM C1579-2013

Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

JTS 202-1-2010

水运工程大体积混凝土温度裂缝控制技术规程(附条文说明)

Technical Specification for Thermal Cracking Control of Mass Concrete of Port and Waterway Engineering

发布日期：2010-05-24  实施日期：2010-09-01

BS ISO 12108-2012

Metallic materials. Fatigue testing. Fatigue crack growth method

发布日期：2012-08-31  实施日期：2012-08-31

EN 1062-7-2004

Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Part 7:Determination of crack bridging properties

实施日期：2004-05-01

SJ/T 11097-1996

船用导航雷达裂缝天线方向图测试方法

Test methods of radiation pattern of the slotted-waveguide antenna for marine radar

实施日期：1997-01-01

SJ 20401-1994

平板裂缝天线孤立缝测量方法

Methods of measurement for isolated slot of planar waveguide-fed slot arrays

发布日期：1994-09-30  实施日期：1994-12-01

ASTM D7474-2012

通过浸入各种化学试剂中测定挤压或模铸砜塑料件中残余应力的规程

Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

实施日期：2012-04-01

JC/T 1041-2007

混凝土裂缝用环氧树脂灌浆材料

Epoxy grouting resin for concrete crack

实施日期：2007-11-01

NF A05-318-2013

Corrosion of metals and alloys - Guidelines for assessing the significance of stress corrosion cracks detected in service

NF A09-311-2000

Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1.

GB/T 23660-2009

建筑结构裂缝止裂带

Building structure crack split-stopping tape

发布日期：2009-04-24  实施日期：2009-12-01

EN ISO 6874-2005

Dentistry. Polymer-based pit and fissure sealants ISO 6874:2005;Supersedes EN 26874:1992

实施日期：2005-08-01