ASTM A933/A933M-2014

加固用聚氯乙烯复合钢丝和焊接钢丝网规格

Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

发布日期：2014-05-01  实施日期：2014-05-01

DIN 51460-1-2007

Testing of petroleum products - Method for sample preparation - Part 1: Microwave incineration

实施日期：2007-11-01

SJ/T 31035-1994

弯曲校正机完好要求和检查评定方法

适用范围：本标准规定了弯曲校正机的完好要求和检查、评定方法。 本标准适用于板料弯曲机、三辊卷板机、弯管机、型材弯曲机、板料校平机、型材校直机、板料折弯机、轧平机等弯曲校正机械。其他型式弯曲校正机亦可参照执行。

发布日期：1906-06-08  实施日期：1906-06-08

JB/T 10447-2004

Y3系列（IP55）三相异步电动机技术条件（机座号63—355）

发布日期：2004-02-10  实施日期：2004-06-01

NF E86-503-2-2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.

ISO 13919-1-1996

焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分:钢

Welding -- Electron and laser-beam welded joints -- Guidance on quality levels for imperfections -- Part 1: Steel

适用范围：Gives guidance on quality levels of imperfections in electron and laser beam welded joints in steel. Three levels are given which refer to production quality.

发布日期：1996-08-01  实施日期：1996-08-01

DIN EN 15695-2-2010

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures; German version EN 15695-2:2009

实施日期：2010-07-01

ISO 13347-1-2004

工业风机 标准实验室条件下风机声功率级的测定 第1部分:综览

Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 1: General overview

适用范围：ISO 13347:2004 deals with the determination of the acoustic performance of industrial fans. In addition, it may be used to determine the acoustic performance of fans combined with an ancillary device s...

发布日期：2004-08-01  实施日期：2004-08-01

GB 20041.21-2008

电缆管理用导管系统 第21部分：刚性导管系统的特殊要求

Conduit systems for cable management - Part 21: Particular requirement - Rigid conduit systems

适用范围：GB/T 20041.1-2005的本章适用,除下述内容外： 增加： GB 20041的本部分规定了刚性导管系统的要求。

发布日期：2008-12-30  实施日期：2010-02-01

DIN EN 12298-1998

生物技术.设备.密封性试验程序导则

Biotechnology - Equipment - Guidance on procedures for testing leaktightness; German version EN 12298:1998

适用范围：The document gives guidance on general testing procedures to assess the leaktightness of biological equipment (components and assembled components). It is concerned with a release of microorganisms tha...

NF M62-260-2006

Monitoring for inadvertent movement and illicit trafficking of radioactive material.

DIN CLC/TS 50136-7-2005

报警装置 报警信号传递系统和设备 第7部分:应用指南

Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines

实施日期：2005-07-01

NF S10-100-2005

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation.

DIN EN 60679-1-2008

Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification

实施日期：2008-02-01

BS EN 840-5-2012

移动废物和回收容器 性能要求和试验方法

Mobile waste and recycling containers. Performance requirements and test methods

发布日期：2013-01-31  实施日期：2013-01-31

YD/T 931-1997

通信设备生产企业质量手册基本要求--电信软件部分

实施日期：1998-01-01

NF A47-251-6-2008

Terminations for steel wire ropes - Safety - Part 6 : asymmetric wedge socket.

BS EN 60601-2-39-2008+A11-2011

医用电气设备 腹膜透析设备的基本安全和基本性能的特殊要求

Medical electrical equipment. Particular requirements for basic safety and essential performance of peritoneal dialysis equipment

发布日期：2009-03-31 

BS EN 1915-3-2004+A1-2009

Aircraft ground support equipment. General requirements. Vibration measurement methods and reduction

实施日期：2004-11-04

BS IEC 62533-2010

Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material Instrumentation pour la radioprotection. Instruments portables de haute sensibilit pour la détection photonique de matières radioactives

实施日期：2010-07-31