ISO 14978-2006

产品几何量技术规范(GPS) GPS测量设备的一般概念和要求

Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment

适用范围：ISO 14978:2006 specifies the general requirements, terms and definitions of characteristics of simple GPS measuring equipment, e.g. micrometers, dial gauges, callipers, surface plates, height gauges, g...

发布日期：2006-07-01  实施日期：2006-07-01

IEEE 1139-2008

基本频率和时间计量学的物理量定义 随机不稳定性

Definitions of physical quantities for fundamental frequency and time metrology-random instabilities

实施日期：2008-09-26

NF X35-122-300-2009

Ergonomics of human-system interaction - Part 300 : introduction to electronic visual display requirements.

ISO 16000-10-2006

室内空气 第10部分: 建材及家具挥发性有机成分排放量测定 排放试验单元法

Indoor air -- Part 10: Determination of the emission of volatile organic compounds from building products and furnishing -- Emission test cell method

适用范围：ISO 16000-10:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishin...

发布日期：2006-02-01  实施日期：2006-02-01

DIN 51220-2003

材料试验机 材料试验机的一般要求、鉴定和校准

Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines

适用范围：The document specifies generals for requirements and for verification and calibration of materials testing machines.

EN 24006-1993

Measurement of Fluid Flow in Closed Conduits. Vocabulary and Symbols (ISO 4006 :1991)

实施日期：1993-01-01

BS EN ISO 10360-1-2001

几何产品规范(GPS) 坐标测量机(CMM)的验收和复检试验 第1部分:词汇

Geometrische Produktspezifikation (GPS). Annahmepruefung und Bestaetigungspruefung fuer Koordinatenmessgeraete (KMG). Begriffe Geometrical Product Specifications (GPS)-Acceptance and Reverification Tes...

适用范围：This part of ISO 10360 establishes a vocabulary for coordinate measuring machines (CMM), and their acceptance and reverification tests.

实施日期：2001-10-01

DIN EN 60645-1-2002

电声.音响设备.第1部分:纯音音响

Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers (IEC 60645-1:2001); German version EN 60645-1:2001

适用范围：This part of International Standard IEC 60645 specifies general requirements for audiometers and particular requirements for pure-tone audiometers designed for use in determining hearing threshold leve...

实施日期：2002-09-01

IEC 61010-1-2010

测量、控制和实验室用电气设备的安全要求 第1部分:通用要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

适用范围：IEC 61010-1:2010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a) Electrical test and measurement e...

发布日期：2010-06-10  实施日期：2010-06-10

BS EN ISO 10012-2003

测量管理系统 测量过程和测量设备的要求 替代BS EN 30012-1:1994和BS ISO 10012-2:1997

Messueberwachungssystem Measurement management systems Requirements for measurement processes and measuring equipment Systemes de management de la mesure. Exigences pour les processus et les equipement...

适用范围：ISO 10012:2003 specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate comp...

实施日期：2003-04-16

DIN EN ISO 6506-4-2006

金属材料 布氏硬度试验 第4部分:硬度数值表

Metallic materials - Brinell hardness test - Part 4: Table of hardness values

实施日期：2006-03-01

DIN EN 60444-11-2011

Measurement of quartz crystal unit parameters. Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction (IEC 60444-11:2010

NF E10-112-1-2011

Geometrical product specifications (GPS) - Flatness - Part 1 : vocabulary and parameters of flatness.

EN 14268-2005

Irrigation techniques. Meters for irrigation water

实施日期：2005-08-01

BS EN 62053-52-2005

Electricity metering equipment (AC). Particular requirements. Symbols

实施日期：2006-01-30

DIN 8128-1-2011

Automatic catchweighing instruments - Part 1: Metrological and technical requirements - Tests (OIML R 51-1:2006 + Erratum 2010)

DIN EN ISO 17294-1-2007

Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004)

实施日期：2007-02-01

EN 837-2-1997

压力计.第2部分:压力计的选用和安装建议

Pressure Gauges. Part 2:Selection and Installation Recommendations for Pressure Gauges

实施日期：1997-03-01

EN 61069-5-1995

Industrial-Process Measurement and Control Evaluation of System Properties for the Purpose of System Assessment Part 5: Assessment of System Dependability (IEC 1069-5 : 1995)

BS EN ISO 14257-2001

声学 声学性能评估用工作场所内空间声音分布曲线测量和参数描述 ISO 14257:2001;校正13673:2002年1月25日

Akustik. Messung und Modellbildung der Schallausbreitungskurven in Arbeitsraeumen zum Zweck der Beurteilung ihrer akustischen Qualitaet Acoustics-Measurement and Parametric Description of Spatial Sound...

适用范围：This International Standard specifies a method for measuring the spatial sound distribution curve(s) of a given workroom. A method is given for determining, from the measured data, two descriptors of t...

实施日期：2001-11-14