NF T76-152-4-2013

Adhesives for load-bearing timber structures - Test methods - Part 4 : determination of the effects of wood shrinkage on the shear strength.

BS EN 1186-14-2002

接触食品的材料和制品 塑料 第14部分:使用试验介质异辛烷和95%乙醇的从塑料到与之接触的脂肪类食品的整体移动的"替代试验"试验方法

Werkstoffe und Gegenstaende in Kontakt mit Lebensmitteln. Kunststoffe. Pruefverfahren fuer'Ersatzpruefungen' fuer die Gesamtmigration aus Kunststoffen,die fuer den Kontakt mit fettigen Lebensmitteln be...

适用范围：This European Standard specifies test methods for 'substitute tests' performed with volatile test media, iso-octaneand 95 % v/v aqueous ethanol, for the determination of overall migration from plastics...

实施日期：2002-10-14

DIN EN 1015-11-2007

Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar

实施日期：2007-05-01

DIN 52230-2004

汽车玻璃装配用安全玻璃防盗性能的测定 系统试验

Determination of resistance to forced entry of safety glass constructions used in vehicle glasing - Test of glasing systems

适用范围：The test methods are designed to assess levels of resistance against forced entry provided by safety glazing used in vehicles.

EN 13183-1-2002

Moisture content of a piece of sawn timber. Part 1:Determination by oven dry method Incorporating corrigendum September 2003

实施日期：2002-04-01

DIN EN ISO 527-3-2003

塑料 拉伸性能的测定 第3部分:薄膜和薄板材的试验条件

Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002)

EN 15416-5-2006

Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Part 5:Determination of conventional pressing time

实施日期：2006-08-01

NF P75-450-2012

Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation.

EN 61223-3-5-2004

Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance of computed tomography X-ray equipment IEC 61223-3-5:2004

DIN EN 1348-2007

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

实施日期：2007-11-01

NF P61-606-2008

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives.

DIN EN 326-3-2004

木基镶板 抽样、剪切和检验 第3部分:每批板的验收试验

Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels

适用范围：This European Standard specifies methods for the verification of compliance of one or more properties of an isoleted lot of wood-based panels with the requirements of the relevant EN specification stan...

EN 14187-5-2003

Cold applied joint sealants. Part 5:Test method for the determination of the resistance to hydrolysis

实施日期：2003-06-19

EN 1297-2004

Flexible sheets for waterproofing. Bitumen,plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation,elevated temperature and water

实施日期：2004-09-01

EN 480-14-2006

混凝土、灰浆和灌浆混合物.试验方法

Admixtures for concrete,mortar and grout. Test methods. Part 14:Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test

实施日期：2006-10-01

DIN EN 16002-2010

Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing; German version EN 16002:2010

实施日期：2010-10-01

BS EN 1186-13-2002

接触食品的材料和制品 塑料 第13部分:全迁移的低温试验方法

Werkstoffe und Gegenstaende in Kontakt mit Lebensmitteln. Kunststoffe. Pruefverfahren fuer die Gesamtmigration bei hohen Temperaturen Materials and articles in contact with foodstuffs Plastics Part 13:...

适用范围：This European Standard specifies test methods for the determination of the overall migration into fatty foodsimulants from plastics materials and articles, by total immersion of test specimens in a fat...

实施日期：2002-10-14

EN 13925-3-2005

Non destructive testing. X ray diffraction from polycrystalline and amorphous materials. Part 3:Instruments

实施日期：2005-05-01

IEC 61223-3-5-2004

医用成像部门的评价及例行试验 第3-5部分:验收试验 X射线计算机体层摄影设备成像性能

Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment

适用范围：This standard - defines the essential parameters which describe the performance of the CT scanners with regard to image quality, patient dose and positioning; - defines the methods of testing the essen...

发布日期：2004-08-23  实施日期：2004-08-23

EN 323-1993

人造板 密度测定

Wood-Based Panels. Determination of Density

实施日期：1993-01-01