BS EN 12517-2-2008

Zerst?rungsfreie Prüfung von Schwei?verbindungen. Bewertung von Schwei?verbindungen in Aluminium und seinen Legierungen mit Durchstrahlung. Zul?ssigkeitsgrenzen Non-destructive testing of welds Part 2:Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels Essais non destructifs des assemblages soudés. ?valuation par radiographie des assemblages soudés en aluminium et ses alliages. Niveaux d'acceptation

实施日期：2008-09-30

BS EN ISO 17638-2009

焊缝的无损检测 磁粉检测

Non-destructive testing of welds. Magnetic particle testing

适用范围：This International Standard specifies techniques for detection of surface imperfections in welds inferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The...

发布日期：2010-01-31  实施日期：2010-01-31

ISO 17638-2003

焊接的无损检验 磁粉探伤

Non-destructive testing of welds -- Magnetic particle testing

适用范围：ISO 17638:2003 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques ...

发布日期：2003-08-01  实施日期：2003-08-01

DIN EN 14096-2-2003

无损检验 放射性胶片数字化系统的检定 第2部分:最低要求

Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements

DIN EN ISO 23277-2010

焊接的无损检测 焊接的渗透检验 验收标准

Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels

适用范围：This Standard specifies acceptance levels for indications of surface imperfections in metallic welds which are tested with penetrant testing.

实施日期：2010-03-01

ISO 17639-2003

金属材料焊接的破坏性试验 焊接头的低倍和显微镜检验

Destructive tests on welds in metallic materials -- Macroscopic and microscopic examination of welds

适用范围：ISO 17639:2003 gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination.

发布日期：2003-09-01  实施日期：2003-09-01

EN 60068-2-42-2003

Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections IEC 60068-2-42: 2003

IEC 60068-2-78-2001

环境试验 第2-78部分:试验 试验室:稳态湿热

Environmental Testing. Part 2-78:Tests. Test 2-78:Body Cab:Damp Heat,Steady State Essais D′Environnement. Partie 2-78:Essais. Essai Cab:Chaleur Humide,Essai Continu First Edition;Replaces IEC 60068-2-3...

实施日期：2001-08-01

DIN EN 1435-2002

焊接的无损检测 焊接处的辐射试验

Non-destructive testing of welds - Radiographic testing of welded joints

适用范围：The document specifies fundamental techniques of weld radiography.

ISO 17636-2003

焊接的无损检验 熔焊接头的放射试验

Non-destructive testing of welds -- Radiographic testing of fusion-welded joints

适用范围：ISO 17636:2003 specifies fundamental techniques for radiographic examination of fusion welded joints in metallic materials. The object is to obtain satisfactory and repeatable results using the most ec...

发布日期：2003-09-01  实施日期：2003-09-01

BS EN 60068-2-78-2002

环境试验 第2-78部分:试验 试验Cab:湿热,恒定 IEC 60068-2-78:2001

Umweltpruefungen. Pruefungen. Pruefung Cab. Feuchte Waerme konstant Environmental Testing-Part 2-78:Tests-Test Cab:Damp Heat,Steady State Essais d'environnement. Essais. Essai cab. Chaleur humide,essai...

适用范围：This part of IEC 60068 provides a test method for determining the suitability of electrotechnical products, components or equipment for transportation, storage and use under conditions of high humidity...

实施日期：2002-03-13

BS EN ISO 17635-2010

Zerst?rungsfreie Prüfung von Schwei?verbindungen. Allgemeine Regeln für metallische Werkstoffe Non-destructive testing of welds. General rules for metallic materials Contr?le non destructif des assemblages soudés. Règles générales pour les matériaux métalliques

实施日期：2010-03-31

NF C20-740-2000

Environmental testing - Part 2 : tests - Test Z/AM : combined cold/low air pressure tests.

DIN EN 60068-2-75-1998

环境试验.第2部分:试验:试验Eh:锤试验

Environmental testing - Part 2: Tests; test Eh: Hammer tests (IEC 60068-2-75:1997); German version EN 60068-2-75:1997

适用范围：The document provides three standardized and co-ordinated test methods for determining the ability of a specimen to withstand specified severities of impact. It is used, in particular, to demonstrate a...

EN ISO 10675-1-2013

Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2008)

发布日期：2013-08-14  实施日期：2013-08-14

NF A89-510-1997

Non-destructive examination of welds. Radiographic examination of welded joints.

DIN EN 60352-2-2006

Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance (IEC 60352-2:2006)

实施日期：2007-03-01

EN 60352-2-2006

Solderless Connections Part 2: Crimped Connections - General Requirements, Test Methods and Practical Guidance IEC 60352-2: 2006

NF A89-551-2010

小于或等于50毫米的厚钢板熔焊接头的X线检查.做法推荐

Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels.

EN 60068-2-40-1999

环境试验.第2部分:试验.试验Z/AM:低温/低气压综合试验

Environmental Testing Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests Supersedes HD 323.2.40 S1:1988; IEC 60068-2-40:1976 + A1:1983

发布日期：1999-11-01  实施日期：1999-11-01