IEC 62209-2-2010

手持和身体佩戴使用的无线通信设备对人体的电磁照射 人体模型、仪器和规程第2部分:靠近人体使用的无线通信设备的比吸收率(SAR)的测定规程(频率范围30MHz-6GHz)

Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models,instrumentation,and procedures. Part 2:Procedure to determine the specific absorpti...

适用范围：This part of IEC 62209 series is applicable to any wireless communication device capable oftransmitting electromagnetic fields (EMF) intended to be used at a position near the humanbody, in the manner ...

发布日期：2010-03-30  实施日期：2010-03-01

DIN 50157-2-2008

Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices

实施日期：2008-04-01

NF A03-116-2004

钢铁产品 检验的文件

Steel products - Inspection documents - List of information and description.

DIN-Fachbericht CEN/TR 15177-2006

混凝土耐冻露性能的试验 内部结构损坏

Testing the freeze-thaw resistance of concrete - Internal structural damage

实施日期：2006-06-01

DIN 65629-1993

航空和航天用碳纤维板材

Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification

适用范围：The document covers the requirements and test applicable to fabric sheet and tape prepreg from carbon fibres and non reactive thermoplastics.

DIN EN 772-3-1998

砖石试验方法.第3部分:陶土才硅酸钙砌块净体积的测定(重量法)

Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing; German version EN 772-3:1998

适用范围：The document specifies a method of determining the net volume and percentage of voids in clay masonry units (including frogs and cells).

DIN CEN/TS 12390-9-2006

Testing hardened concrete - Part 9: Freeze-thaw resistance - Scaling; German version CEN/TS 12390-9:2006

实施日期：2006-08-01

NF A50-425-2008

铝和铝合金.危险货物的储存和运输用罐的可焊接轧制产品

Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods.

DIN EN ISO 7500-1 Berichtigung 1-2009

Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); Corrigendum 1 to English version of DIN EN ISO 7500-1:2004-11

发布日期：2009-07-01  实施日期：2009-07-01

NF A36-301-2008

冷拉或冷弯用连续热轧低碳钢板和钢带.交货技术条件

Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions.

BS EN 14286-2008

铝和铝合金.危险物品运输和存储用容器的焊接轧制品

Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods

适用范围：This document specifies the technical conditions of inspection and delivery, the mechanical properties, thetolerances on dimensions and form of rolled semi-finished aluminium alloy products intended fo...

实施日期：2009-02-28

EN 1559-6-1998

铸造.交货技术条件.第6部分:锌合金铸件的附加要求

Founding. Technical Conditions of Delivery. Part 6:Additional Requirements for Zinc Alloy Castings Ratified European Text

实施日期：1997-10-22

NF H00-072-6-2008

Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6 : automatic recording systems for measuring randomly occuring shock during monitoring of transports.

BS EN 772-2-1998

砖石结构的试验方法.集料混凝土砖石结构孔隙面积百分率的测定

Pruefverfahren fuer Mauersteine. Bestimmung des prozentualen Lochanteils in Mauersteinen aus Beton (mittels Papiereindruck) Methods of test for masonry units. Part 2:Determination of percentage area of...

适用范围：This European Standard specifies a method of determining the percentage area of voids in aggregate concrete masonry units.

实施日期：1998-12-15

EN 10296-2-2005

Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Part 2:Stainless steel Incorporating corrigendum February 2007

实施日期：2005-12-01

BS EN 10216-4-2013

压力无缝钢管 交货技术条件 第4部分 规定低温特性的非合金和合金钢管

Seamless steel tubes for pressure purposes — Technical delivery conditions Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

发布日期：2013-12-31  实施日期：2013-12-31

DIN SPEC 91335-2013

Sport areas with synthetic turf systems - Usage of factory made shockpads

发布日期：2013-11-01  实施日期：2013-11-01

DIN ISO 24394-2013

Welding for aerospace applications – Qualification test for welders and welding operators – Fusion welding of metallic components (ISO 24394:2008 + Amd. 1:2013)

发布日期：2013-12-01  实施日期：2013-12-01

EN 10216-5-2013

压力用无缝钢管- 交货技术条件- 第5部分:不锈钢管

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

实施日期：2013-12-01

NF A03-002-1-2005

Metallic materials - Verification of static uniaxial testing machines - Part 1 : tension/compression testing machines - Verification and calibration of the force measuring system.