DIN 51433-1992

废油的检验.废油中矿物油含量测定.红外分光光度法

Testing of used oils; determination of the mineral oil content of used oil; infrared spectrometric method

ISO 18412-2005

水质 铬的测定 低污染水用光度法

Water quality determination of chromium(vi) photometric method for weakly contaminated water first edition

适用范围：This International Standard specifies a method for the determination of chromium(VI) in drinking water in mass concentrations between 2 μg/l and 50 μg/l. For the determination of higher concentrations,...

实施日期：2005-06-01

DIN EN 14647-2006

铝酸钙水泥 成分、要求和合格标准

Calcium aluminate cement - Composition, specifications and conformity criteria

适用范围：This European Standard gives a general definition of calcium aluminate cement and its composition. Itincludes requirements for the mechanical, physical and chemical properties and also states theconfor...

实施日期：2007-04-01

DIN EN 10250-2-1999

一般工程用自由锻钢锻件.第2部分:非合金钢和特种钢

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels; German version EN 10250-2:1999

适用范围：The document specifies the technical delivery conditions for open die steel forgings made of non-alloy quality and special steels.

DIN 51438-2005

苯和苯同系物的检验 噻吩含量的测定

Testing of benzene and benzene homologues; determination of the content of thiophene in benzene; gas chromatography

ISO 11495-2008

珠宝 钯珠宝合金中钯的测定 用钇作为内标元素的电感耦合等离子体(ICP) 溶液-光谱法

Jewellery -- Determination of palladium in palladium jewellery alloys -- Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element

适用范围：ISO 11495:2008 describes a method for the determination of palladium in palladium jewellery alloys, preferably within the range of fineness specified in ISO 9202, by means of inductively coupled plasma...

发布日期：2008-08-01  实施日期：2008-08-01

BS EN ISO 5943-2006

Kaese und Schmelzkaese. Bestimmung des Chloridgehaltes. Potentiometrisches Titrationsverfahren Cheese and processed cheese products Determination of chloride content Potentiometric titration method Fromages et fromages fondus. Determination de la teneur en chlorures. Methode par titrage potentiometrique

实施日期：2006-11-30

EN ISO 663-2008

Animal and vegetable fats and oils. Determination of insoluble impurities content

实施日期：2008-11-01

NF X43-062-2005

Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence.

NF X43-060-3-2004

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.

EN ISO 787-8-2000

General Methods of Test for Pigments and Extenders. Part 8:Determination of Matter Soluble in Water. Cold Extraction Method ISO 787-8:2000;Incorporating Corrigendum November 2000

实施日期：2000-10-01

EN ISO 7208-2008

Skimmed milk,whey and buttermilk. Determination of fat content. Gravimetric method (Reference method)

实施日期：2008-10-01

DIN EN ISO 21078-1-2008

耐火制品中氧化硼(III)的测定 第1部分:陶瓷、玻璃和釉用氧化原料中氧化硼(III)总量的测定

Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes

适用范围：This part of ISO 20078 specifies methods of determining boron(III) oxide in refractory products and rawmaterials, in mass fraction of 0,01% or greater. It is applicable to the determination of total DO...

实施日期：2008-04-01

EN 12441-10-2004

Zinc and zinc alloys. Chemical analysis. Part 10:Determination of chromium and titanium in zinc alloys. Spectrophotometric method

实施日期：2004-12-01

DIN EN 12441-9-2005

锌和锌合金 化学分析 第9部分:锌合金中镍的测定 火焰原子吸收光谱法

Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys; Flame atomic absorption spectrometric method

适用范围：This document specifies a flame atomic absorption spectrometric method for the determination of nickel in zinc alloys. It is applicable to the products specified in EN 1774 and EN 12844. It is suitable...

NF T70-938-1-2005

Explosives for civil uses - Propellants and rocket propellants - Part 1 : requirements.

BS EN 15308-2008

Charakterisierung von Abf?llen. Bestimmung ausgew?hlter polychlorierter Biphenyle (PCB) in festem Abfall unter Anwendung der Kapillar-Gaschromatographie mit Elektroneneinfang-Detektion oder massenspektrometrischer Detektion Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection Caractérisation des déchets. Détermination de polychlorobiphényles (PCB) sélectionné

实施日期：2008-05-30

BS EN ISO 21258-2010

Emissionen aus station?ren Quellen. Bestimmung der Massenkonzentration von Distickstoffmonoxid (N2O). Referenzverfahren. Nicht-dispersives Infrarot-Verfahren Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method:Non-dispersive infrared method ?missions de sources fixes. Détermination de la concentration massique de protoxyde d'azote (N2O). Méthode de référence. Méthode infrarouge non dispersive

实施日期：2010-07-31

NF P15-101-1/A3-2009

Cement - Part 1 : composition, specifications and conformity criteria for common cements.

DIN EN ISO 17380-2013

土壤质量 氰化物总量和易释放氰化物的测定 连续流分析法

Soil quality - Determination of total cyanide and easily liberatable cyanide - Continuous-flow analysis method (ISO 17380:2013); German version EN ISO 17380:2013