ISO 22514-7-2012

过程管理中的统计方法 能力和性能 第7部分:测量过程的能力

Statistical methods in process management -- Capability and performance -- Part 7: Capability of measurement processes

适用范围：ISO 22514-7:2012 defines a procedure to validate measuring systems and a measurement process in order to state whether a given measurement process can satisfy the requirements for a specific measuremen...

发布日期：2012-09-01  实施日期：2012-09-01

EN 116200-1991

Sectional Specification: Electromechanical All-Or-Nothing Relays (Including Relays for Severe Environmental Conditions)

ISO 2859-2-1985

计数抽样检验程序 第2部分:用于孤立批检验按极限质量（LQ）检索的抽样计划

Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection

适用范围：Can be used when the switching rules in ISO 2859-1 are not applied. Indexing is by a preferred series of limiting qualities with a consumer''s risk usually below 10 % and always below 13 %. Procedures ...

发布日期：1985-08-01  实施日期：1985-08-01

ISO 11135-1-2007

医疗保健产品灭菌 环氧乙烷 第1部分:医疗器械灭菌工艺的设定、确认和常规控制的要求

Sterilization of health care products. Ethylene oxide. Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices first edition [superseded:Iso 11...

适用范围：This part of ISO 11135 specifies requirements for the development, validation and routine control of anethylene oxide sterilization process for medical devices.NOTE 1 Although the scope of this part of...

发布日期：2007-04-27  实施日期：2007-05-01

NF V59-002-1982

食用胶 取样

Food products. Edible gelatine. Sampling.

实施日期：1982-10-01

BS EN ISO/IEC 17040-2005

合格评定.合格评定机构和认可机构同等评定的一般要求

Konformitaetsbewertung. Allgemeine Anforderungen an die Begutachtung unter gleichrangigen Konformitaetsbewertungsstellen und Akkreditierungsstellen Conformity assessment General requirements for peer a...

适用范围：1 This International Standard specifies the general requirements for the peer assessment process to be carried out by agreement groups of accreditation bodies or conformity assessment bodies. It addres...

实施日期：2005-02-01

BS EN 9104-003-2010

Luft-und Raumfahrt. Qualit?tsmanagementsysteme. Anforderung an das Qualit?tsmanagementsysteme der Luft-und Raumfahrt anwendbar für Auditoren Ausbildung und Qualifikation Aerospace series. Quality management systems Part 003:Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification Série aérospatiale. Systèmes de management de la qualit Exigences applicables au système de management de la qualit dans le domaine aérospatial (SMQA) formation et qualification des

实施日期：2010-07-31

DIN EN 15038-2006

Translation services - Service requirements; German version EN 15038:2006

实施日期：2006-08-01

NF D36-111-1989

辅助设备.烹调.加热.装配于煤气网供气家用燃气设备和G1/2B阳连接墙装龙头的塞子和橡皮接头

Auxiliary equipment. Cooking. Heating. Push-on connectors for rubber tubes and caps intended to be fitted on certain domestic appliances using mains distributed combustible gases and on G 1/2 B male wa...

实施日期：1989-12-01

BS 9041-1978

经质量评定的充气微波开关详细规范的制定规则.可调和宽频带TR管与TR限幅器.全部评定级

Gasgefuellte Mikrowellenschaltroehren (guetebestaetigt). Vorbereitungsregeln fuer Detailspezifikationen. Abstimmbare und breitbandige Empfaengersperroehren und-begrenzer. Volles Guetebestaetigungsnivea...

适用范围：Ratings, characteristics, inspection requirements and additional information for a range of tubes and limiters.

实施日期：1978-01-01

QB/T 2884-2007

鞋类 外底试验方法 耐磨性能

Footwear-Test methods for outsoles-Abrasion resistance

发布日期：2007-10-08  实施日期：2008-03-01

BS EN 61165-2006

Application of Markov techniques

实施日期：2008-02-29

BIP 2006-2003

Auditing the ISO 19011 Way

NF S98-101-1-2007

Sterilization of health care products - Ethylene oxide - Part 1 : requirements for development, validation and routine control of a sterilization process for medical devices.

DIN ISO 4638-1993

软质泡沫聚合材料.空气透气率的测定

Polymeric materials, cellular flexible; determination of air flow permeability; identical with ISO 4638:1984

适用范围：The document specifies a method for the determination of the permeability of flexible cellular polymeric materials to air flow, it is applicable to test pieces cut from products of cellular material.#,...

BS EN ISO 10012-2003

测量管理系统 测量过程和测量设备的要求 替代BS EN 30012-1:1994和BS ISO 10012-2:1997

Messueberwachungssystem Measurement management systems Requirements for measurement processes and measuring equipment Systemes de management de la mesure. Exigences pour les processus et les equipement...

适用范围：ISO 10012:2003 specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate comp...

实施日期：2003-04-16

GB/T 17294.2-2008

缩微摄影技术 字母数字计算机输出缩微品 质量控制 第2部分:方法

Micrographics - Alphanumeric computer output microforms - Quality control - Part 2: Method

适用范围：GB/T 17294的本部分规定了利用格式幻灯片对字母数字式计算机输出缩微品（COM）的质量进行测量的方法。并提供了确立图像发生器最适宜强度（曝光量）的方法。 　　本部分适用于使用格式幻灯片的COM记录仪。

发布日期：2008-07-16  实施日期：2009-01-01

NF C93-463-1982

连接件 接线柱 一般规定

Components for electronic equipment. Connecting bars. General requirements.

实施日期：1982-09-01

GBZ 186-2007

乳腺X射线摄影质量控制检测规范

Specification for testing of quality control in X-ray mammography

适用范围：本标准适用于乳腺 X 射线掇影质最拧制检测。

发布日期：2007-03-16  实施日期：2007-10-01

GB/T 22274.2-2008

良好实验室规范监督部门指南 第2部分：执行实验室检查和研究审核的指南

Guidance for GLP monitoring authorities - Part 2: Guidance for the conduct of laboratory inspections and study audits

适用范围：GB/T 22274的本部分规定了的监督部门的试验机构检查、检查程序、研究审核、检查或研究审核的完成。　　本部分适用于在我国境内设立的GLP监督部门。

发布日期：2008-08-04  实施日期：2009-04-01