BS EN 61188-5-5-2007

Leiterplatten und Flachbaugruppen. Konstruktion und Anwendung. Betrachtungen zur Montage (Anschlussfl?che/Verbindung). Bauelemente mit Gullwing-Anschlüssen auf vier Seiten Printed boards and printed board assemblies. Design and use. Part 5-5:Attachment (land/joint) considerations. Components with gull-wing leads on four sides Cartes imprimées et cartes imprimées équipées. Conception et utilisation . Considérations sur les liaisons pistes-soudures. Composants. sorties en aile de mouette sur deux

实施日期：2007-12-31

DIN IEC 60467-1978

电机碳刷物理性能测定试验方法

Test Procedures for Determining Physical Properties of Carbon Brushes for Electrical Machines

ANSI/ASME B16.22-2013

Wrought Copper and Copper Alloy Solder Joint Pressure Fittings

发布日期：2013-09-25 

DIN EN 4632-004-2013

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels; German version EN 4632-004:2012

发布日期：2013-11-01  实施日期：2013-11-01

EN 61188-5-3-2007

Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides

BS EN 1012-1-2010

压缩机和真空泵.安全要求.压缩机

Kompressoren und Vakuumpumpen. Sicherheitsanforderungen. Kompressoren Compressors and vacuum pumps. Safety requirements Part 1:Air compressors Compresseurs et pompes. vide. Prescriptions de sécurit Com...

适用范围：This part of EN 1012 is applicable to compressors and compressor units having an operating pressure greaterthan 0,5 bar and designed to compress air, nitrogen or inert gases. This document deals with a...

实施日期：2010-10-31

NF C93-704-3-2012

Electronics assembly technology - Part 3 : selection guidance of environmental and endurance test methods for solder joints.

DIN EN 3155-052-2008

Aerospace series - Electrical contacts used in elements of connection - Part 052: Contacts, electrical, male 052, type A, crimp, class S - Product standard

实施日期：2008-05-01

DIN EN 62137-1-1-2008

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test

实施日期：2008-02-01

EN 3155-001-2009

Aerospace series. Electrical contacts used in elements of connection. Part 001:Technical specification

实施日期：2009-02-01

BS EN 60512-12-4-2006

Steckverbinder fuer elektronische Einrichtungen. Mess-und Pruefverfahren. Pruefungen der Loetbarkeit. Pruefung 12d. Loetwaermebestaendigkeit,Loetbadverfahren Connectors for electronic equipment. Tests and measurements. Part 12-4:Soldering tests. Test 12d:Resistance to soldering heat,solder bath method Connecteurs pour equipements electroniques. Essais et measures. Essais de soudure. Essai 12d. Resistance a la chaleur de soudage,methode de bain de brasage CORR 16984:March 30,2007

实施日期：2006-04-28

BS EN 611-2-1997

锡和锡合金.锡铅合金和锡铅合金器皿.第2部分:锡铅合金器皿

Zinn ind Zinnlegierungen. Zinnlegierungen und Zinngeraet. Zinngeraet Tin and Tin Alloys-Pewter and Pewterware Part 2:Pewterware Etain et alliages d'etain. Etain pour la fabrication d'objets en etain et...

适用范围：Requirements for fabrication, sampling, analysis and marking of pewterware.

实施日期：1997-01-15

DIN EN 62137-1-4-2009

表面安装技术 表面安装焊缝的环境和耐久性试验方法 第1-4部分:循环弯曲试验

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test

实施日期：2009-08-01

EN 1254-1-1998

Copper and Copper Alloys. Plumbing Fittings. Part 1:Fittings with Ends for Capillary Soldering or Capillary Brazing to Copper Tubes

实施日期：1998-01-01

EN 4632-005-2009

Aerospace series. Weldability and brazeability of materials in aerospace constructions. Part 005:Homogeneous assemblies of heat resisting Ni or Co base alloys

实施日期：2009-12-01

DIN 4000-41-1983

焊片、焊接钉和焊端点的特性表

Tabular layouts of article characteristics for solder lugs, solder pins, soldering terminals

适用范围：Tabular layouts of article characteristics for solder lugs, solder pins, soldering terminalsGrille de description pour caractéristiques des objets des cosses à souder, baguettes de soudure, plots à fou...

IEC 61188-5-3-2007

印制电路板和印制电路板组件 设计和使用 第5-3部分:连接(连接面/接头)考虑事项 两侧带有鸥翼形引线的元件

Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides

适用范围：IEC 61188-5-3:2007 provides information on land pattern geometries used for the surface attachment of electronic components with gull-wing leads on two sides. The intent of the information presented he...

发布日期：2007-10-30  实施日期：2007-10-30

DIN EN 3155-001-2009

Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical specification

实施日期：2009-10-01

NF C93-400-12-4-2006

Connectors for electronic equipment - Tests and measurements - Part 12-4 : soldering tests - Test 12d : resistance to soldering heat, solder bath method.

DIN EN 4632-002-2009

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys

实施日期：2009-06-01