BS M 32-1969

Specification for dimensions of aircraft accessory drives and mounting pads

CB 924-1977

精密仪器通用件 轴承盖

GB/T 5900.1-2008

机床　主轴端部与卡盘连接尺寸　第1部分：圆锥连接

Machine tools - Connecting dimensions of spindle noses and workholding chucks - Part 1: Conical connection

适用范围：本部分规定了车床主轴锥端(A型)与花盘或卡盘相对应连接面间的互换性尺寸。　　注:“凸轮锁紧型”、“卡口型”和“圆柱型”分别在ISO 702-2:2007、ISO 702-3:2007和ISO 702-4中作出规定。

发布日期：2008-08-11  实施日期：2009-02-01

GB/T 13008-2010

混流泵、轴流泵 技术条件

Technical specification for mixed and axial flow pumps

适用范围：本标准规定了混流泵、轴流泵的订货条件、技术要求、工厂检验和试验要求及性能试验规则等。本标准适用于输送清水或物理化学性质类似于清水的液体的泵及输送海水的泵。输送液体的温度不高于50℃。当多个文件之间含有相抵触的技...

发布日期：2010-09-26  实施日期：2011-02-01

BS 5208-1975

小型内燃机用动力输出轴和安装面的尺寸规范

Abtriebswellen und Anbauflansche fuer kleine Verbrennungsmotoren. Abmessungsspezifikation Dimensions of Power Take-Off Driving Shafts and Mounting Faces for Small Internal Combustion Engines Dimensions...

适用范围：Principal dimensions to permit interchangeability of various attachments on small internal combustion engines generally up to 15 kW power output.

实施日期：1975-01-01

NF E22-393-2-2004

Rolling bearings - Linear motion rolling bearings - Part 2 : static load ratings.

EN ISO 7500-2-2006

Metallic Materials. Verification of Static Uniaxial Testing Machines. Part 2:Tension Creep Testing Machines. Verification of the Applied Load

实施日期：2006-12-01

IEC 61196-1-122-2006

同轴通信电缆 第1-122部分:电气试验方法 同轴电缆间的串音试验

Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables

适用范围：applies to coaxial communications cables. It specifies a test method for determining the cross-talk between coaxial cables for use in communications systems. This method is applicable for the measureme...

发布日期：2006-03-13  实施日期：2006-03-13

BS EN 1337-11-1998

结构轴承.运输,储存和安装

Lager in Bauwesen. Transport,Zwischenlagerung und Einbau Structural Bearings Part 11:Transport,Storage and Installation Appareils d'appui structuraux. Transport,entreposage intermediaire,et montage

适用范围：This standard is applicable to the transport, storage and installation of bearings used in the construction of bridges or of structures requiring comparable bearing systems.

实施日期：1998-03-15

DIN EN 3727-2007

Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification; German and English version EN 3727:2006

实施日期：2007-04-01

DIN EN ISO 9513-2013

金属材料 单轴试验用引伸计的标定 视频引伸计系统和标定

Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013); German version EN ISO 9513:2012

发布日期：2013-05-01  实施日期：2013-05-01

EN 60444-7-2004

Measurement of quartz crystal unit parameters Part 7: Measurement of activity and frequency dips of quartz crystal units IEC 60444-7:2004

QC/T 294-1999

汽车半轴技术条件

实施日期：1999-03-15

BS ISO 12297-2012

Rolling bearings. Steel cylindrical rollers. Dimensions and tolerances

发布日期：2012-04-30 

DIN EN 14620-3-2006

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0℃ and -165℃ - Part 3: Concrete components; German version EN 14620-3:2006

实施日期：2006-12-01

JBn 4142-1985

轴承套圈磨床 制造与验收技术要求

实施日期：1986-10-01

NF A03-002-2-2007

Metallic materials - Verification of static uniaxial testing machines - Part 2 : tension creep testing machines - Verification of the applied force.

NF L31-270-1994

Aerospace series. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads.

JB/T 8923-1999

滚动轴承 钢球振动(加速度)技术条件

Rolling bearings -Specifications of vibration(velocity) for steel balls ...

实施日期：2000-01-01

DIN EN 81-58-2003

电梯制造和安装的安全规则 检查和试验 第58部分:井道门阻燃性能试验

Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test