NF E22-201-4-2006

Ball screws - Part 4 : axial rigidity.

GB 11800-1989

船用防爆轴流通风机

Marine explosion-proof type axial flow fans

适用范围：本标准规定了船用防瀑轴流通风机的产品分类、技术要求、试验方法和检验规则等。 本标准适用于抽除船舶上油舱、货舱、泵舱、蓄电池舱,弹药舱、飞机库、油漆间等场所含有易燃、易爆混合性气体或蒸汽的防爆通风机。 也适用于...

实施日期：1990-06-30

DIN EN 13286-53-2005

非结合和水力结合混合物 第53部分:用轴向挤压制作水粘合混合物试样的方法

Unbound and hydraulically bound mixtures - Method for making test specimens - Part 53: Making cylindrical specimens by axial compression

适用范围：This Document specifies a test method for making cylindrical specimens of hydraulically bound mixtures to a predetermined density and moisture content by axial compression. This document applies to mix...

EN 3425-2006

Aerospace series. Groove dimensions for axial mouting external type retaining rings

实施日期：2006-06-01

BS 2A 295-2000

Nuts, self-locking, with maximum operating temperature less than or equal to 425$0DC. Test methods

GB/T 26077-2010

金属材料 疲劳试验 轴向应变控制方法

Metallic materials - Fatigue testing - Axial-strain-controlled method

适用范围：本标准规定了金属材料轴向应变控制疲劳试验的定义、符号、试验设备、试验程序、数据处理和试验报告。本标准适用于在恒温恒幅条件下应变控制且应变比 Re =- 1 的单轴加载试样。本标准也可用于指导在其他条件下进行的疲劳试验...

发布日期：2011-01-10  实施日期：2011-10-01

DIN 8000-1962

渐开线正齿轮用滚铣刀的测定尺寸与误差; 基本概念

Design Dimensions and Errors of Hobs for Involute Spur Gears; Fundamental Terms

适用范围：Design dimensions and tolerances of hobs for involute spur gears; definitionsGrandeurs fondamentales et tolérances de fraises mères pour roues cylindriques dentées à développante; définitions

EN 60286-1-1998

Packaging of Components for Automatic Handling Part 1: Tape Packaging of Components with Axial Leads on Continuous Tapes IEC 60286-1:1997; Supersedes HD 143.1 S1:1983

BS 6101-1-1981

机床滚珠丝杠.第1部分:动载荷和静载荷及额定寿命的计算方法

Kugelgewindetriebe fuer Werkzeugmaschinen. Methoden fuer die Berechnung der dynamischen Belastung und Lebensdauer Machine Tool Ball Screws Part 1:Methods of Calculating Dynamic Load and Life Ratings Vi...

适用范围：Applies to re-circulating ball screw assemblies having the shaft and nuts manufactured from hardened steel.

实施日期：1981-01-01

BS 4480-7-1984

滑动轴承规范.米制系列.第7部分:压制双金属半止推垫圈的尺寸和公差规范

Gleitlager:metrische Reihe. Masse und Toleranzen von Pressbimetall-Gleitlagerhalbscheiben Plain bearings:metric series. Part 7:Specification for dimensions and tolerances of pressed bimetallic half thr...

适用范围：This International Standard specifies the main features and lays down tolerances for pressed bimetallic half thrust washers having an outside diameter up to 160 mm. NOTES 1 All the linear dimensions...

实施日期：1984-05-31

MT/T 545-1996(2004)

矿用液压斜轴式轴向柱塞马达产品质量分等

发布日期：1996-04-18  实施日期：1996-10-01

ISO 281-2007

滚动轴承 额定动载荷和额定寿命

Rolling bearings -- Dynamic load ratings and rating life

适用范围：ISO 281:2007 specifies methods of calculating the basic dynamic load rating of rolling bearings within the size ranges shown in the relevant ISO publications, manufactured from contemporary, commonly u...

发布日期：2007-02-01  实施日期：2007-02-01

ISO/TR 10657-1991

对ISO 76的注释

Explanatory notes on ISO 76

发布日期：1991-05-31  实施日期：1991-05-31

EN ISO 3927-2011

Metallic powders,excluding powders for hardmetals. Determination of compressibility in uniaxial compression

实施日期：2011-02-01

NF P98-846-7-2004

Unbound and hydraulically bound mixtures - Part 7 : cyclic load triaxial test for unbound mixtures.

BS ISO 3408-5-2006

Ball screws. Static and dynamic axial load ratings and operational life

ASTM C1007-2011

Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

实施日期：2011-05-15

DIN 31653-3-1991

滑动轴承.稳定工作条件液压滑动止推轴承.垫片止推轴承计算用允许运算参数

Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings

适用范围：The aim of this standard is to achieve designs of plain bearings that are reliable in operation by the application of a calculation procedure for oil-lubricated hydrodynamic plain bearings with complet...

ISO 3408-5-2006

滚珠丝杠 第5部分:静态和动态轴向额定负载以及使用寿命

Ball screws -- Part 5: Static and dynamic axial load ratings and operational life

适用范围：ISO 3408-5:2006 specifies the calculation schemes for static and dynamic load ratings, and operational life, in order to obtain comparable values for the design and use of ball screws.

发布日期：2006-06-01  实施日期：2006-06-01

NF C93-013-1999

自动运输用零部件的包装.第1部分:带轴向引线的元器件在连续胶带上的胶带包装

Packaging of components for automatic handling - Part 1 : tape packaging of components with axial leads on continuous tapes.