ISO 6524-1992

滑动轴承--薄壁轴瓦--周长检验

Plain bearings -- Thin-walled half-bearings -- Checking of peripheral length

适用范围：Specifies two methods of checking the measuring equipment and gauging tools necessary for measuring the peripheral length (or nip or crush) of thin-walled half-bearings that are flexible and, in the fr...

发布日期：1992-09-01  实施日期：1992-09-01

JB/T 5389.1-2005

滚动轴承 轧机用四列圆柱滚子轴承

适用范围： 本部分规定了轧机用四列圆柱滚子轴承(以下简称轴承)的主要结构类型、代号方法、外形尺寸和技术条件。 本部分适用于轴承的制造、检验和用户的设计、选型与验收。

实施日期：2006-02-01

DIN 15049-1958

具有电动绞车、或类似提升装置的起重机 带滑动轴承的轨道导轮

Cranes with electric hoists or similar hoist gear; track wheels with plain bearings

NF F19-510-1998

Railway applications. Axleboxes. Lubricating greases.

NF L31-343-1995

Aerospace series. Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.

DIN 95367-1998

弹性构件.屋顶构件,A型和B型

Elastomer mounts - Roof mounts, types A and B

适用范围：The document applies to elastomer mounts, types roof mounts to be used at ambient temperatures of -30 ?to 70 ?#,,#

DIN 732-2010

Rolling bearings - Thermally safe operating speed - Calculation and correction values

实施日期：2010-05-01

GB/T 18325.1-2001

滑动轴承 流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度

Plainbearings--Bearing fatigue--Plain bearings in test rigs and in application underconditions of hydrodynamic lubrication

适用范围：本标准叙述了通过计算产生疲劳的滑动轴承合金层的应力来改进试验结果可比性的方法[见附录(标准的附录)]。在实际应用中也需要一个同样的计算，因为应力是流体动力油膜产生的压力造成的，以一定要完整的阐明运行和润滑的条...

发布日期：2001-02-26  实施日期：2001-09-01

BS EN 996-1995+A3-2009

Piling equipment. Safety requirements

实施日期：1996-08-15

DIN V 65900-17-2001

航空航天系列.O形环槽.O形环槽设计准则.基本计算

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

适用范围：The document provides: the design criteria recommended for the housing definition for o-rings as specified in ISO 3601-1; a calculation method to formulate dimensions of the housing for which the near ...

ISO 11135-1-2007

医疗保健产品灭菌 环氧乙烷 第1部分:医疗器械灭菌工艺的设定、确认和常规控制的要求

Sterilization of health care products. Ethylene oxide. Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices first edition [superseded:Iso 11...

适用范围：This part of ISO 11135 specifies requirements for the development, validation and routine control of anethylene oxide sterilization process for medical devices.NOTE 1 Although the scope of this part of...

发布日期：2007-04-27  实施日期：2007-05-01

GB/T 6577-1986

液压缸活塞用带支承环密封沟槽型式、尺寸和公差

Hydraulic fluid power--Cylinders--Piston seal housings incorporating bearing rings--Dimensions and tolerances

适用范围：本标准规定的密封沟槽型式、尺寸和公差、适用于安装在往复运动的液压缸活塞上起双向密封作用的带支承环组合密封圈。

发布日期：1986-07-21  实施日期：1987-04-30

DIN 15062-2-1982

起重机 绳轮 轴承和轮毂的尺寸

Cranes; rope pulleys; dimensions of hubs and bearings

适用范围：Cranes; sheaves for wire ropes; dimensions for hubs and bearingsGrues; poulies à c?ble; dimensions pour moyeux et placements des paliers

NF L31-227-1973

机身用轴承 不锈钢制单排球面滚柱轴承 尺寸和负荷

Airframe bearings, single row. Self aligning roller bearings. Corrosion-resisting steel. Dimensions and loads.

BS ISO 15241-2012

Rolling bearings. Symbols for physical quantities

发布日期：2012-07-31  实施日期：2012-07-31

ISO 14192-1998

航空航天--飞机结构用单列自位中等负荷防尘球面滚子轴承--米制系列

Aerospace -- Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty -- Metric series

发布日期：1998-04-01  实施日期：1998-04-01

TB/T 2958-1999

滑动轴承 薄壁轴瓦周长检验

适用范围：本标准规定了薄壁轴瓦周长的检脸方法、测量所必需的设备及量具，以便使高出度值保持在GB/T 3162和GB 7308规定的范围内，从而保证轴瓦在轴承座中能达到额定的安装应力。 薄壁轴瓦具有弹张量，在自由状态下不是圆柱形。因此，轴...

实施日期：1999-09-01

EN 3047-1993

Aerospace Series. Bearings,Airframe Rolling. Rigid Single Row Ball Bearings in Corrosion Resisting Steel. Diameter Series 0 and 2. Reduced Clearance Category. Dimensions and Loads

实施日期：1993-01-01

BS EN 2337-2006

航空和航天.关节轴承.交货技术条件

Luft-und Raumfahrt. Gelenklager. Technische Lieferbedingungen Spherical Plain Bearings-Technical Specification Serie aerospatiale. Rotules lisses. Specification technique

适用范围：This standard specifies the required characteristics, inspection and test methods, qualification and acceptanceconditions for spherical plain bearings designed to withstand static loads and loads with ...

实施日期：2006-06-30

JB/T 10781-2007

四螺柱滚动轴承座 型式与尺寸

4 Sruds rolling bearings block bousings-Types and dimensions

适用范围：本标准规定了适用于安装调心滚子轴承的四螺柱剖分式轴承座（以下简称轴承座）的型式与尺寸。本标准适用于生产厂制造和用户选型。轴承座中的滚动轴承采用油脂润滑。轴承座油封的工作条件：线速度：v≤6m/s；温度：-20℃～+80℃。

发布日期：2007-08-28  实施日期：2008-02-01