NF F54-007-1973

钢索传动 ８５毫米滑轮的传导轴

Fixed railway installations. Signalling. Wire transmissions. Guide pins for 85 mm pulleys.

DIN EN 14343-2006

Rotary positive displacement pumps - Performance tests for acceptance

实施日期：2009-05-01

NF E22-052-1970

圆柱形轴端 短系列

Cylindrical shaft ends.short series.

实施日期：1970-05-01

EN ISO 16330-2003

Reciprocating positive displacement pumps and pump units Technical requirements ISO 16330:2003

实施日期：2003-05-27

BS EN 13104-2009

铁路设施 轮副和行车机构 动力轴 设计方法

Bahnanwendungen. Rads?tze und Drehgestelle. Treibradsatzwellen. Konstruktionsverfahren Railway applications. Wheelsets and bogies. Powered axles. Design method Applications ferroviaires. Essieux montés...

适用范围：This standard:1) defines the forces and moments to be taken into account with reference to masses, traction and brakingconditions;2) gives the stress calculation method for axles with outside axle jour...

实施日期：2009-04-30

BS ISO 7919-4-2009

非往复式机械的机械振动.对旋转轴的测量和评定规范.第4部分:燃气轮机组

Mechanische Schwingungen. Bewertung der Schwingungen von Maschinen durch Messungen an rotierenden Wellen. Gasturbinens?tze mit Gleitlagern Mechanical vibration. Evaluation of machine vibration by measu...

实施日期：2009-11-30

BS 5138-1974

成品机制整体锻造和落锻冲压曲轴的磁粉探伤规范

Magnetpartikelfehlerinspektion maschinell bearbeiteter,massiv geschmiedeter und gefallhaemmerter Kurbelwellen. Spezifikation Magnetic Particle Flaw Inspection of Finished Machined Solid Forged and Drop...

适用范围：Specifies conditions for magnetic particle flaw inspection of solid forged and drop stamped crankshafts with pin or journal finished machined diameter 80 mm and over, excluding built-up shafts and auto...

实施日期：1974-01-01

EN 225-2-2007

油雾化燃烧器 转轴泵和外部驱动 尺寸 第2部分: 油燃烧器发动机

Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensions. Part 2:Oil burner motors

实施日期：2007-10-01

DIN 65299-1988

航空和宇航; 密封片(IT-板),交货的技术要求

Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses

适用范围：Universal joints to this standard are intended for use on rotary shafts of aircraft control systems within the temperature range from minus 54 degree Celsius to 120 degree Celsius.

NF E02-100-2-2010

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.

DIN ISO 7919-2-2010

机械振动 在转轴上测量来评定机器振动 第2部分:50MW以上,额定转速1500r/min、1800r/min、3000r/min、3600r/min陆地安装的汽轮机和发电机

Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/mi...

适用范围：This part of ISO 7919 establishes provisions for evaluating the severity the severity of in-situ, broad-band shaft vibration measured radial(i.e. transverse)to the shaft axis at, or close to,the main b...

实施日期：2010-06-01

BS ISO 3046-5-2002

Hubkolben-Verbrennungsmotoren. Kenndaten. Drehschwingungen Reciprocating internal combustion engines. Performance. Part 5:Torsional vibrations Moteurs alternatifs a combustion interne. Performances. Vibrations de torsion

实施日期：2002-02-02

NF E22-056-1984

园柱轴和１／１０锥度的锥形轴端 内螺纹 中心孔

Cylindrical and 1/10 conical shaft ends. Internal threads. Center holes.

BS IEC 60050(411)-1997

Internationales Elektrotechnisches Woerterbuch. Drehende Maschinen International Electrotechnical Vocabulary-Chapter 411:Rotating machines Vocabulaire electrotechnique international. Machines tournantes

实施日期：1997-10-15

JT/T 106-1991

汽车发动机凸轮轴修理技术条件

Technical requirements for automobile engine camshafts being overhauled ...

EN 14343-2005

Rotary positive displacement pumps. Performance tests for acceptance Incorporating corrigendum October 2008

实施日期：2005-12-01

ISO 12129-2-1995

滑动轴承 第2部分:州、法兰和止推环的形位公差和表面粗糙度

Plain bearings -- Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars

适用范围：Specifies tolerances on form and position as well as the surface roughness of shafts, flanges and thrust collars as used in plain bearing units. Applicable to journal or thrust plain bearing units or t...

发布日期：1995-03-01  实施日期：1995-03-01

GB/T 15826.6-1995

锤上钢质自由锻件机械加工余量与公差 光轴类

实施日期：1996-08-01

BS ISO 500-2-2004

Agricultural tractors. Rear-mounted power take-off types 1, 2 and 3. Narrow-track tractors, dimensions for master shield and clearance zone

DIN 32712-1-2009

Shaft to collar connection - Polygon profile P4C - Part 1: Generalities and geometry

实施日期：2009-03-01