Cargo van with thermal insulated cargo space for the transport of food - Requirements and testing
适用范围：This standard contains requirements and testing for cargo van with termal insulated cargo space for the transport of food.
Passenger car, truck and bus tyres -- Methods of measuring rolling resistance -- Single point test and correlation of measurement results
适用范围：ISO 28580:2009 specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on passenger cars, trucks and buses. Tyres ...
发布日期：2009-07-01 实施日期：2009-07-01
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage.
Road vehicles -- Pneumatic braking connections between motor vehicles and towed vehicles -- Interchangeability
适用范围：ISO 1728:2006 specifies the requirements which ensure interchangeability of the pneumatic braking connections between motor vehicles and towed vehicles. It concerns vehicle combinations equipped with p...
发布日期：2006-09-01 实施日期：2006-09-01
Passenger car, truck, bus and motorcycle tyres -- Methods of measuring rolling resistance
适用范围：ISO 18164:2005 specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on passenger cars, trucks, buses and motorc...
发布日期：2005-07-01 实施日期：2005-07-01
Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 3: General, mass and administrative exchange parameters
适用范围：ISO 21308-3:2007 provides codes for the exchange of general, mass and administrative information. It applies to commercial vehicles, as defined in ISO 3833, having a maximum gross vehicle mass above 3 ...
发布日期：2007-02-01 实施日期：2007-02-01
Commercial vehicles and buses -- Gearbox flanges -- Type A
适用范围：Specifies the nominal dimensions and tolerances which affect the interchangeability between gearbox flanges and mating parts used on commercial vehicles and buses. The flanges type A are not interchang...
发布日期：1986-07-31 实施日期：1986-07-31
发布日期：2013-07-01 实施日期：2013-07-01
Road vehicles -- Gearshift patterns -- Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode
适用范围：ISO/TS 12104:2003 establishes the shift patterns for manual transmissions with power-assisted gear changes and automatic transmissions with manual-gearshift mode on road vehicles. It also specifies the...
发布日期：2003-12-01 实施日期：2003-12-01
Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
适用范围：ISO 1185:2003 specifies the dimensions of, and gives particular requirements for, 7-pole connectors of type 24 N and their contact allocation for the electrical connection between towing and towed vehi...
发布日期：2003-10-01 实施日期：2003-10-01
Further clarification of ISO 28580
适用范围：ISO/TR 16377:2012 seeks to document elements of clarification to ISO 28580:2009 where consensus exists. Other suggestions for clarification will demand further work and consensus building and are not i...
发布日期：2012-07-01 实施日期：2012-07-01
Commercial vehicles and buses; mounting dimensions for starter motors of types 1, 2, 3 and 4; identical with ISO 7650:1987
适用范围：The document lays down the mounting dimensions for interchangeability of starter motors mounted on internal combustion engines in commercial vehicles and buses. It applies to starter motors, types 1,2,...
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
适用范围：ISO 16750-3:2007 applies to electric and electronic systems/components for road vehicles. ISO 16750-3:2007 describes the potential environmental stresses, and specifies tests and requirements recommend...
发布日期：2007-08-01 实施日期：2007-08-01
Commercial vehicles and buses -- Gearbox flanges -- Type S
适用范围：Specifies the nominal dimensions and tolerances which affect the interchangeability between gearbox flanges and mating parts used on commercial vehicles and buses. The flanges type S are not interchang...
发布日期：1986-07-31 实施日期：1986-07-31
Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 4: Mapping to STEP application protocol 239
适用范围：ISO/TS 21308-4:2007 describes the mapping to STEP application protocol 239 for the exchange of dimensional data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial ...
发布日期：2007-12-01 实施日期：2007-12-01
Road vehicles. Towing vehicles. Mounting of electrical connections on rear cross members.
请选择需要导出的字段：
请选择需要导出的字段：
知识产权声明 | 服务承诺 | 联系我们 | 客户服务 | 关于我们
互联网出版许可证：新出网证(京)字042号 互联网药品信息服务资格证书号：(京)-经营性-2011-0017 信息网络传播视听节目许可证 许可证号：0108284
万方数据标准管理系统V1.0 证书号:软著登字第4252816号
京ICP证：010071 京公网安备11010802020237号 京ICP备08100800号-1
客服电话：4000115888 客服邮箱：service@wanfangdata.com.cn 违法和不良信息举报电话：4000115888 举报邮箱：problem@wanfangdata.com.cn 举报专区：https://www.12377.cn
万方数据知识服务平台--国家科技支撑计划资助项目（编号：2006BAH03B01）©北京万方数据股份有限公司 万方数据电子出版社
