NA to BS EN 1993-1-9-2005

UK National Annex to Eurocode 3. Design of steel structures. Fatigue

NF C93-406-3-2009

Connectors for electronic equipment - Product requirements - Part 3 : rectangular connectors - Sectional specification.

YD/T 778-2011

光纤配线架

Optical fiber distribution frame

适用范围：本标准规定了光纤配线架的定义、命名、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于光纤配线架。其它类似光配线设备（如光纤配线箱）也可参照执行。

发布日期：2011-06-01  实施日期：2011-06-01

BS 8010-2.1-1987

Pipelines Part 2:Pipelines on Land:Design,Construction and Installation Section 2.1:Ductile Iron

实施日期：1987-01-01

EN 60512-16-16-2008

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

DIN EN ISO 1179-2-2008

一般用途和液压传动的连接件 带有合成橡胶或金属对金属密封的ISO 228-1螺纹端口和螺柱端 第2部分:重型（S系列）和轻型（L系列）带合成橡胶密封的螺柱端（E型）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends w...

适用范围：This part of ISO 1179 specifies dimensions, performance requirements and test procedures for heavy-duty(S series) and light-duty (L series) stud ends with ISO 228-1 threads and the elastomeric sealing ...

实施日期：2008-08-01

NF P22-151/A1-2010

Eurocode 9 - Design of aluminium structures - Part 1-1 : general structural rules.

BS EN 3645-008-2007

Aerospace series. Connectors,electrical,circular,scoop-proof,triple start threaded coupling,operating temperature 175 °C or 200 °C continuous. Part 008:Non release plug with grounding ring. Product standard

实施日期：2007-10-31

BS EN 3646-007-2006

Luft-und Raumfahrt. Elektrische Rundsteckverbinder mit Bajonettkupplung,Betriebstemperatur 175°C oder 200°C konstant. Hermetischer fester Steckverbinder mit runden Schweiss-oder Loetflansch. Produktnorm Aerospace series Connectors,electrical,circular,bayonet coupling,operating temperature 175 °C or 200 °C continuous Part 007:Receptacle,hermetic,round flange,welding or brazing mounting Product standard Serie aerospatiale. Connecteurs electriques circulaires a accouplement par baionnettes,temperat

实施日期：2006-09-29

BS EN 61000-4-13-2002+A1-2009

Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

实施日期：2002-07-01

NF L54-150-005-2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 oC continuous - Part 005 : receptacle, connector, two hole fixing for cable to EN 4532 - Product standard.

BS EN 50288-8-2012

Multi-element metallic cables used in analogue and digital communication and control. Specification for type 1 cables characterised up to 2 MHz

发布日期：2012-03-31 

DIN EN 4639-101-2009

Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1, 25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between -65℃ and 125℃ - Product standard

实施日期：2009-06-01

BS EN 60068-2-43-2003

环境试验.试验方法.试验Kd.触点和连接件用硫化氢试验

Umweltpruefungen. Pruefungen. Pruefung Kd. Hydrogensulfid fuer Kontakte und Verbindungen Environmental testing Part 2-43:Tests Test Kd:Hydrogen sulphide test for contacts and connections Essais d'envir...

适用范围：This test: - is intended to provide accelerated means to assess the effects of the tarnishing of silver and silver alloys used for contacts and connections; - is particularly suitable for giving ...

实施日期：2003-09-24

ISO 7375-1-1986

道路车辆 牵引车和挂车辆之间气压制动连接用蛇形管组件 第1部分:尺寸

Road vehicles -- Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles -- Part 1: Dimensions

适用范围：Specifies the minimum conditions to ensure braking compatibility and in particular response time for coiled pipe assemblies. Applies to coiled pipe assemblies for vehicle combinations equipped with pne...

发布日期：1986-11-01  实施日期：1986-11-01

BS ISO 8434-2-2007

流体动力装置及通用金属管接头.37°扩口管接头

Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung. 37 B?rdelverschraubung Metallic tube connections for fluid power and general use. Part 2:37 flared connectors Raccordements de...

适用范围：This part of ISO 8434 specifies general and dimensional requirements for the design and performance of 37° flared connectors that are suitable for use with ferrous and non-ferrous tubes with outside di...

实施日期：2007-11-30

BS ISO 9803-1-2007

Vakuumtechnik. Einbauabmessungen von Rohrbauteilen. Flanschtyp ohne Schneidkanten Vacuum technology. Mounting dimensions of pipeline fittings. Part 1:Non knife-edge flange type Technique du vide. Dimensions de montage des raccords de conduit. Brides de type sans guillotine

实施日期：2007-06-29

NF T54-937-2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection.

BS EN 14420-1-2004

Hose fittings with clamp units. Requirements, survey, designation and testing

IEC 61131-2-2007

可编程控制器 第2部分:设备要求和试验

Programmable controllers. Part 2:Equipment requirements and tests Edition 3.0

适用范围：This part of IEC 61131 specifies requirements and related tests for programmable controllers(PLCs) and their associated peripherals (for example, programming and debugging tools(PADTs), human-machine i...

实施日期：2007-07-01