EN 50411-2-9-2010

Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S& A

DIN EN 3660-063-2010

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self locking for EN 3645 - Product standard; German and English version EN 3660-063:2009

实施日期：2010-10-01

DIN EN 61316-2000

工业电缆卷轴

Industrial cable reels (IEC 61316:1999); German version EN 61316:1999

实施日期：2000-09-01

IEC 62664-1-1-2013

Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre

发布日期：2013-02-20  实施日期：2013-02-20

DIN EN 60512-3-1-2003

电子设备用连接器 试验和测量 第3-1部分:绝缘试验 试验3a:绝缘电阻

Connectors for electronic equipment; Tests and measurements; Part 3-1: Insulation tests; Test 3a: Insulation resistance

适用范围：The object of this test is to define a standard test method to assess the insulation resistance of electromechanical components.

实施日期：2003-01-01

CNS 12298-1988

频率3MHz以下电连接器检验法(硝酸气试验、镀金接点TP-53)

Method of Test for Low Frequency (Below 3 MHz) Electrical Connectors (TP-53 Nitric Acid Vapor Test, Gold Finish)

发布日期：1988-05-11  实施日期：1988-05-11

NF L54-225-001-2007

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001 : technical specification.

DIN EN 2591-411-1998

航空和航天.光和电连接元件.试验方法.第411部分:横向座插向性

Aerospace series - Elements of electrical and optical connection; test methods - Part 411: Insert retention in housing (torsional); German version EN 2591-411:1998

适用范围：The document specifies a method of assessing the insert retention housing (shells) of elements of connection subjected to torsional loads.

NF C61-350/A1-2007

Appliance couplers for household and similar general purposes - Part 1 : general requirements.

ISO/IEC 14776-413-2007

信息技术 小型计算机系统接口(SCSI) 第413部分:体系结构模型-3(SAM-3)

Information technology -- Small Computer System Interface (SCSI) -- Part 413: SCSI Architecture Model -3 (SAM-3)

适用范围：The Small Computer System Interface (SCSI) protocol is designed to provide an efficient peer-to-peer I/O bus with the maximum number of hosts and peripherals determined by the bus width (8 or 16). This...

发布日期：2007-02-01  实施日期：2007-02-01

IEC 61810-1-2008

基础机电继电器 第1部分:一般要求

Electromechanical elementary relays. Part 1:General requirements Edition 3.0

适用范围：This part of IEC 61810 applies to electromechanical elementary relays (non-specified time allor-nothing relays) for incorporation into equipment. It defines the basic functionalrequirements and safety-...

实施日期：2008-02-01

DIN EN 61169-38-2009

射频连接器 第38部分:分规范 插入式(架式应用)射频同轴连接器模型 特征阻抗50Ω(TMA型) 50Ω应用

Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ohm (type TMA) - 50-ohm-ap...

实施日期：2009-09-01

ASTM C1644-2006

钢筋混凝土废水池和管之间挠曲性联轴节规格

Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

适用范围：<p>1.1 This specification covers the minimum performance and material requirements for resilient connectors used for connections between reinforced concrete tanks used for septic effluent treatment/det...

实施日期：2006-07-01

IEC 61076-2-103-2004

电子设备用连接器 第2-103部分:圆形连接器 ‘XLR’型多极连接器系列的详细规范

Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type ''XLR'')

适用范围：Establishes uniform specifications, type testing requirements and quality assessment procedures for a subfamily of circular connectors. Should be used in conjunction with IEC 61076-2. Applies to a rang...

发布日期：2004-03-08  实施日期：2004-03-08

SJ 50681/7-1994

Ｃ系列（接电缆）插孔接触件２级射频同轴插头连接器详细规范

Connectors,plug,coaxial,radio frequency (series C(cabled),socket contact,class 2),detail specification for

适用范围：本规范规定了C系列(接电缆)插孔接触件2级射频同轴插头连接器的详细要求。本规范适用于在无线电设备和电子仪器的射频回路中连接柔软射频同轴电缆、利用卡口连接机构达到快速连接或分离的、供中功率使用的C系列(接电缆)插孔...

发布日期：1994-09-30  实施日期：1994-12-01

EN 61754-5-2005

Fibre Optic Connector Interfaces Part 5: Type MT Connector Family IEC 61754-5: 2005

BS EN 14420-6-2004

Hose fittings with clamp units. TW tank truck couplings

DIN EN 3372-001-2008

Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65℃ to 175℃ or 200℃ continuous - Part 001: Technical specification

实施日期：2008-10-01

IEC 60512-5-1-2002

电子设备用连接器 试验和测量 第5-1部分:载流容量试验 试验5a:温升

Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

适用范围：Details a standard test method to assess the ability of a component (essentially a connector) to carry its specified current, at room temperature, without exceeding a specified temperature rise.

发布日期：2002-02-22  实施日期：2002-02-22

DIN EN 60512-16-16-2009

电子设备用连接器 试验和测量 第16-16部分:接触件及引出端机械试验 试验16p:固定插片抗扭强度

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

实施日期：2009-03-01