GB/T 29852-2013

光伏电池用硅材料中P、As、Sb施主杂质含量的二次离子质谱测量方法

Test method for measuring Phosphorus, Arsenic and Antimony in silicon materials used for photovoltaic applications by secondary ion mass spectrometry

适用范围：本标准规定了用二次离子质谱仪 〔 SIMS ）测定光伏电池用硅材料中磷、砷和锑含量的方法。

发布日期：2013-11-12  实施日期：2014-04-15

NF S31-014-2-1995

Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 2 : mounting and operating conditions for draw-off taps and mixing valves.

DIN 10811-1-2000

茶叶和制品的分析.液态茶水中可可碱和咖啡因含量的测定.第1部分:HPLC常用方法

Analysis of tea and tea products - Determination of theobromine and coffeine content of fluid tea drinks - Part 1: HPLC-Routinemethod

适用范围：The document specifies a method using high-performance liquid chromatography (HPLC) for the determination of theobromine and coffeine content of fluid tea drinks. The method is usable for tea drinks wi...

GB/T 14410.1-1993

飞行力学概念、量和符号 坐标轴系和运动状态变量

Flight mechanics. Concepts, quantities and symbols Axis systems and motion state variables

实施日期：1994-01-01

IEEE C62.41.2 CORR 1-2012

Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits Corrigendum 1: Deletion of Table A.2 and Associated Text

实施日期：2012-12-05

ISO 6524-1992

滑动轴承--薄壁轴瓦--周长检验

Plain bearings -- Thin-walled half-bearings -- Checking of peripheral length

适用范围：Specifies two methods of checking the measuring equipment and gauging tools necessary for measuring the peripheral length (or nip or crush) of thin-walled half-bearings that are flexible and, in the fr...

发布日期：1992-09-01  实施日期：1992-09-01

NF C61-501/A31-2003

Lamps caps and holders together with gauges for the control of interchangeability and safety - Part 1 : lamps caps.

ISO 10345-1-1992

玻璃.应力光学系数的测定.第1部分:抗张试验

Glass -- Determination of stress-optical coefficient -- Part 1: Tensile test

适用范围：Describes the tensile test for isotropic glass. The wavelength-dependent stress-optical coefficient is a characteristic value of materials and it is necessary for determining the stress from results of...

发布日期：1992-05-01  实施日期：1992-05-01

BS EN 1530-2000

门扇 总体的和局部的平整度 公差级

Door leaves. General and local flatness. Tolerance classes

适用范围：This standard gives the tolerances limits for general and local flatness of door leaves. It applies to door leaves which are supplied without, and independent of, any frames. It does not apply to the l...

实施日期：2000-05-15

ISO 22514-7-2012

过程管理中的统计方法 能力和性能 第7部分:测量过程的能力

Statistical methods in process management -- Capability and performance -- Part 7: Capability of measurement processes

适用范围：ISO 22514-7:2012 defines a procedure to validate measuring systems and a measurement process in order to state whether a given measurement process can satisfy the requirements for a specific measuremen...

发布日期：2012-09-01  实施日期：2012-09-01

GB 8538.17-1987

饮用天然矿泉水中铜的测定方法

Method for determination of copper in drinking natural mineral water

DIN 38406-3-2002

德国对水,废水和淤泥的统一检验法.阳离子(E组).钙和镁的测定(E 3)

German standard methods for the examination of water,waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium,complexometric method (E 3)

GB 5194.4-1985

高冰镍化学分析方法 硫代硫酸钠滴定法测定铜量

Methods for chemical analysis of nickel matte--The sodium thiosulphate titrimetric method for the determination of copper content

JB/T 9263.4-1999

棒式普通实验玻璃温度计 型式和基本尺寸

The types and fundamental sizes of solid -stem common thermometers

适用范围： 本标准规定了在测温精确度要求不高的场合下使用的棒式普通实验玻璃温度计的基本系列、规格和尺寸。 凡本标准未作出规定的，温度计应符合JB/T 9262-1999《工业温度计和实验玻璃温度计》的规定。 本标准适用于普通实...

实施日期：2000-01-01

NF E64-608-4-2010

Safety of woodworking machines - Tenoning machines - Part 4 : edge banding machines fed by chain(s).

DIN 4983-2004

矩形杆刀夹和转位刀架 标记结构

Tool holders with rectangular shank and cartridges for indexable inserts - Presentation of the designation

适用范围：The specifications of this standard apply to the designation of standardized and non-standardized tool holders with rectangular shank and of cartridges intended for the mounting of indexable inserts ma...

NF U26-143-2-2010

Crop protection equipment - Drift classification of spraying equipment - Part 2 : classification of field crop sprayers by field measurements.

NF S30-011-2008

声学 声级的优先参考数

Acoustics - Preferred reference values for acoustical and vibratory levels.

DIN EN 10083-3-2007

Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels

实施日期：2009-01-01

JIS K2425-2006

杂酚油、加工焦油、焦油沥青的试验方法

Test methods of creosote oil, prepared tar and tar pitch

适用范围：この規格は，コールタール製品としてのクレオソート油，加工タール及びタールピッチの試験方法について規定する。

实施日期：2006-11-20