BS 1212-2-1990

浮子阀.第2部分:隔膜型浮子阀(铜合金阀体)(不含浮子)规范

Float operated valves. Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)

适用范围：Specifies workmanship, dimensions and performance requirements for diaphragm type valves of nominal size 3/8 and 1/2, intended for use with floats complying with the requirements of BS 1968 and BS 2456...

DIN 7845-1-1987

全橡胶轮胎; 尺寸和载重能力

Rubber solid tyres; dimensions and load capacities

适用范围：This standard applies to rubber solid tyres with cylindrical and conical bases for fork lift trucks and other vehicles in industrial usage.

BS 5070-1-1988

工程图实用绘制方法.第1部分:一般原则(推荐方法)

Engineering Diagram Drawing Practice Part 1:Recommendations for General Principles

适用范围：Sets out drawing practice common to all fields on engineering diagrams. Covers layout, types of diagrams, drawing sheets, lines, lettering and graphical symbols.

实施日期：1988-01-01

EN 60870-6-503-2002

Telecontrol Equipment and Systems Part 6-503: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - TASE.2 Services and Protocol IEC 60870-6-503: 2002

BS 2C 13-1988

Groessen von Fuelloeffnungen fuer die Fallbetankung von Flugzeugen und der dazugehoerigen Nachfuellstutzen (metrische Reihe) Sizes of Aircraft Gravity Filling Orifices and Associated Replenishment Nozzles (Metric Series) Dimensions des orifices de remplissage par gravite et des buses de ravitaillement associees (serie metrique) sur les aeronefs Specifications

实施日期：1988-01-01

BS 534-1990

水和污水用钢管接头和异型管件规范

Lieferbedingung fuer Stahlrohre,Verschraubungen und Rohrformstuecke fuer Wasser und Abwasser Steel Pipes,Joints and Specials for Water and Sewage Specification des tuyaux en acier,joints et pieces spec...

适用范围：Requirements for seamless and welded carbon steel pipes and specials and for joints in respect of the pipe end preparation in sizes 60.3 mm to 2235 mm outside diameter.

实施日期：1990-01-01

BS 5138-1974

成品机制整体锻造和落锻冲压曲轴的磁粉探伤规范

Magnetpartikelfehlerinspektion maschinell bearbeiteter,massiv geschmiedeter und gefallhaemmerter Kurbelwellen. Spezifikation Magnetic Particle Flaw Inspection of Finished Machined Solid Forged and Drop...

适用范围：Specifies conditions for magnetic particle flaw inspection of solid forged and drop stamped crankshafts with pin or journal finished machined diameter 80 mm and over, excluding built-up shafts and auto...

实施日期：1974-01-01

BS 115-1995

电气用金属电阻材料规范

Metallic Resistance Materials for Electrical Purposes

适用范围：Specifies the dimensions and properties. Materials are coded for alloy type which include marking documentation and packaging requirements.

实施日期：1995-03-15

DIN 5034-4-1994

室内日光照明.最小尺寸窗户的简单测定

Daylight in interiors - Part 4: Simplified determination of minimum window sizes for dwellings

ISO 1151-3-1989

飞行力学 概念、量和符号 部分３:力、力矩及其系数的导数

Flight dynamics -- Concepts, quantities and symbols -- Part 3: Derivatives of forces, moments and their coefficients

适用范围：Deals with derivatives of forces, moments and of other quantities characterizing such forces and moments. The term "derivative" designates the partial derivative of a function with respect to an indepe...

发布日期：1989-04-01  实施日期：1989-04-01

BS 6675-1986

供水用(铜合金)辅助工作阀

Wartungsarmaturen (aus Kupferlegierungen) fuer die Wasserversorgung Servicing Valves (Copper Alloy) for Water Services Robinets d'entretien (en alliage de cuivre) pour circuits d'alimentation en eau do...

适用范围：Three patterns of servicing valve: spherical plug, tapered plug and screw-down, of nominal sizes 10,12, 15 and 22, suitable for working pressures and temperatures from 16 bar at up to and including 30<...

实施日期：1986-01-01

BS 6590-1985

开式机械压力机的额定功率和尺寸规范

Nennleistungen und Masse von mechanischen Einstaenderpressen Specification for Capacity ratings and dimensions of power presses,mechanical open front type Capacites et dimensions des presses mecaniques...

适用范围：Covers range from 100 to 2500 kN.

实施日期：1985-04-30

NF E22-056-1984

园柱轴和１／１０锥度的锥形轴端 内螺纹 中心孔

Cylindrical and 1/10 conical shaft ends. Internal threads. Center holes.

ISO 6551-1982

石油液体和气体 动态测量的精度和可靠性 电脉冲数据和/ 或电子脉冲数据的电缆传输

Petroleum liquids and gases -- Fidelity and security of dynamic measurement -- Cabled transmission of electric and/or electronic pulsed data

适用范围：Establishes guidelines for ensuring the quantities stated, a main objective being to ensure the integrity of the primary indication. In order to achieve different levels of security, criteria and recom...

发布日期：1982-12-01  实施日期：1982-12-01

DIN 40148-2-1984

传输系统和二端口; 线性二端口的对称特性

Transmission systems and two-ports; symmetry characteristics of linear two-ports

适用范围：Transmission systems and two-ports; Symmetry characteristics of linear two-ports

NF H31-364-1990

金属包装.平行六面体长方形罐

Metal packaging. Rectangular can.

实施日期：1990-12-01

DIN 40148-1-1978

传输系统和二端口; 概念和量值

Transmissionsystems and twoports; concepts and quantities

适用范围：Transmissionsystems and twoports; concepts and quantitiesDie Festlegungen dieser Norm beziehen sich auf vollst?ndige Signalübertragungssysteme und auf elektrische Zweitore (Vierpole), die Teile eines ?...

BS 7579-1992

工业筛用金属丝网布、多孔板和电铸板的筛孔命名和额定尺寸规范

Industriesiebboeden. Drahtgewebe,Lochplatten und elektrogeformte Siebfolien. Bezeichnung und Nennoeffnungsweiten Designation and Nominal Sizes of Openings for Woven Wire Cloth,Perforated Plate and Elec...

适用范围：This International Standard specifies the designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet used as screening media for industrial purposes.

实施日期：1992-01-01

BS 5535-1978

直角板料与箱角板料规范

Specification for right angle and box angle plates

适用范围：Provides for three grades of plates made from steel, cast iron or granite in the size range 60 x 50 mm to 600 x 500 mm. Nomenclature, material finish, design, sizes, accuracy, matched pairs, protection...

GB 11340-1989

汽车曲轴箱排放物测量方法及限值

实施日期：1990-01-01