DIN EN 12560-7-2004

法兰及接头 等级命名法兰的垫圈尺寸 第7部分:钢法兰的盖金属套垫圈

VFlanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

适用范围：This standard specifies dimensions, types, design, materials and marking requirements of covered metal jacketed gaskets.#,,#

DIN EN ISO 21457-2010

石油、石化和天然气工业 油气开采系统的材料选择和腐蚀控制

Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010); German version EN ISO 21457:2010

实施日期：2010-12-01

ISO 6507-3-2005

金属材料 维氏硬度试验 第3部分:标准硬度块的标定

Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks

适用范围：ISO 6507-3:2005 specifies a method for the calibration of reference blocks to be used for the indirect verification of Vickers hardness testing machines, as specified in ISO 6507-2. The method is appli...

发布日期：2005-12-01  实施日期：2005-12-01

DIN EN 3474-2006

航空和航天 铝合金AL-P2024-T81 铝板和铝带 0.25 mm ≤ a ≤ 6 mm

Aerospace series - Aluminium alloy AL- P2024-T81 - Sheet and strip - 0.25 mm <= a <= 6 mm

适用范围：This standard specifies the requirements relating to: Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <kleiner => a <kleiner => 6 mm for aerospace applications.#,,#

实施日期：2006-06-01

NF L10-005-1-2002

Aerospace series - Metallic materials - Part 1 : conventional designation.

DIN EN 2511-2006

航空和航天 铝合金AL-P7075-T7351 铝板 6 mm < a ≤ 100 mm

Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a <= 100 mm

适用范围：This standard specifies the requirements relating to: Aluminium alloy AL-P7075-T7351 - Plate - 6 mm <kleiner> a <kleiner => 100 mm for aerospace applications.

实施日期：2006-06-01

BS 7252-3-1997

外科植入物用金属材料.锻制钛6铝4钒合金规范

Chirurgische Implantate-Metallische Werkstoffe. Titanknetlegierung Al6V4 Metallic Materials for Surgical Implants Part 3:Specification for Wrought Titanium 6-Aluminium 4-Vanadium Alloy Implants chirurg...

适用范围：This part of ISO 5832 specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 4-vanadium alloy (Ti 6-Al 4-V alloy) for use in the ...

实施日期：1997-05-15

NF A09-201-2014

Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules

DIN EN ISO 6506-4-2006

金属材料 布氏硬度试验 第4部分:硬度数值表

Metallic materials - Brinell hardness test - Part 4: Table of hardness values

实施日期：2006-03-01

EN ISO 8492-2004

Metallic materials. Tube. Flattening test ISO 8492:1998;Supersedes EN 10233:1993

实施日期：2004-07-01

EN 2422-2005

Aerospace series. Aluminium alloy AL-P2124-T351. Plate. 25 mm greater than a greater than or equal to 120 mm

实施日期：2005-06-01

DIN EN 3999-2007

Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6mm≤a≤6 mm

实施日期：2007-11-01

GB/T 4337-2015

金属材料 疲劳试验 旋转弯曲方法

Metallic materials-Fatigue testing-Rotating bar bending method

适用范围：本标准规定了金属材料旋转弯曲疲劳试验方法。 本标准适用于金属材料在室温和高温空气中试样旋转弯曲的条件下进行的疲劳试验，其他环境 (如腐蚀)下的旋转弯曲疲劳试验也可参照本标准执行。

发布日期：2015-09-11  实施日期：2016-06-01

BS EN ISO 8496-2004

金属材料.管材.环形拉伸试验

Metallische Werkstoffe. Rohr. Ringzugversuch Metallic materials Tube Ring tensile test Materiaux metalliques. Tubes. Essai de traction sur anneaux Supersedes BS EN 10237:1994

适用范围：This International Standard specifies a method for a ring tensile test of tubes to reveal surface and internal defects by subjecting the test piece to strain until fracture occurs. This test may also b...

实施日期：2004-11-23

ISO 14554-1-2000

焊接质量要求 金属材料的电阻焊接 第1部分:完整质量要求

Quality requirements for welding -- Resistance welding of metallic materials -- Part 1: Comprehensive quality requirements

发布日期：2000-04-01  实施日期：2000-04-01

ISO 5173-2009

金属材料焊缝破坏性试验 弯曲试验

Destructive tests on welds in metallic materials -- Bend tests

适用范围：ISO 5173:2009 specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad we...

发布日期：2009-06-01  实施日期：2009-06-01

ISO 12732-2006

金属和合金的腐蚀 用双循环法进行电化学的电位动力再活化测量(根据Cihal"s方法)

Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal''s method)

适用范围：ISO 12732:2006 specifies the method for measuring the degree of sensitization (DOS) in stainless steel and nickel-based alloys using the Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR...

发布日期：2006-09-01  实施日期：2006-09-01

ASTM F1267-2007

网形铁和钢规格

Standard Specification for Metal,Expanded,Steel

适用范围：<p>1.1 This specification covers expanded metal.</p> <p>1.1.1 Expanded metal covered by this specification is intended for a variety of applications.</p> <p>1.2 The values stated in inch-pound units ar...

实施日期：2007-11-01

GB/T 23909.3-2009

无损检测 射线透视检测 第3部分：金属材料X和伽玛射线透视检测总则

Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays

适用范围：GB/T 23909的本部分规定了使用射线透视技术，对金属材料和制品实施以探伤为目的的工X和伽玛射线透视的通用规则。　　本部分不涉及不连续的验收准则。

发布日期：2009-05-26  实施日期：2009-12-01

ISO 17652-2-2003

焊接 和焊接与相关工艺有关底漆的试验 第2部分:底漆的焊接特性

Welding -- Test for shop primers in relation to welding and allied processes -- Part 2: Welding properties of shop primers

适用范围：ISO 17652-2:2003 describes tests for assessing the influence of shop primers on the weldability. The following tests are detailed. Rating test This screening test provides a method of assessing the rel...

发布日期：2003-05-01  实施日期：2003-05-01