BS EN 2829-1995

用喷丸加工法做金属覆层的附着力试验

Pruefung der Haftfestigkeit von metallischen Beschihtungen durch Kugelstrahlen Adhesion Test for Metallic Coatings by Shot Peening (S) Essai d'adherence des revetements metalliques par martelage

适用范围：This standard specifies a test method to determine the adhesion of coatings by shot peening. It applies to ductile metal coatings, such as cadmium, silver or copper, with a hardness : - < 250 HV for...

实施日期：1995-01-01

ISO 10308-2006

金属覆盖层 孔隙率试验评述

Metallic coatings -- Review of porosity tests

适用范围：ISO 10308:2006 reviews published methods for revealing pores (see ISO 2080) and discontinuities in coatings of aluminium, anodized aluminium, brass, cadmium, chromium, cobalt, copper, gold, indium, lea...

发布日期：2006-01-01  实施日期：2006-01-01

CNS 4825-1987

装饰用银电镀层

Electroplated coating of silver

GB/T 12609-2005

电沉积金属覆盖层和相关精饰 计数检验抽样程序

Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes

适用范围：本标准规定了电沉积金属覆盖层的计数检验抽样方案和程序。经供需双方同意，也适用于相关精饰的检验。 　本标准的抽样方案适用于(但不限于)最终产品、零件、工艺材料和库存精饰品的检验。本方案主要用于连续批，但也可用于孤立...

发布日期：2005-10-12  实施日期：2006-04-01

GB/T 5267.3-2008

紧固件 热浸镀锌层

Fasteners - Hot dip galvanized coatings

适用范围：本部分规定了M8～M64钢制粗牙螺纹紧固件、性能等级至10.9级螺栓、螺钉和螺柱，以及性能等级至12级螺母的热浸镀锌层的材料、工艺、尺寸和某些特性。对规格小于M8和(或)螺距小于1.25mm的螺纹紧固件，不推荐采用热浸镀锌。　　注:在...

发布日期：2008-08-25  实施日期：2009-02-01

BS 1344-4-1968

搪瓷层的试验方法.第4部分:耐磨性

Methods of testing vitreous enamel finishes. Resistance to abrasion

适用范围：This Part of BS 1344 gives a method of test for determining the abrasion resistance of vitreous enamel finishes.

实施日期：1968-01-01

CNS 7797-2011

锌、铝及其合金的熔射

Thermal spraying. Zinc,aluminum and their alloys

发布日期：1981-08-20  实施日期：2011-09-29

NF A91-493-2011

Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method.

GB 5943-1986

轻工产品金属镀层和化学处理层的抗变色腐蚀试验方法 硫化氢试验法

实施日期：1986-12-01

CNS 8290-1986

钢喷敷

Steel Spray Deposits

发布日期：1982-01-13  实施日期：1986-02-22

BS EN ISO 10684-2004

Fasteners. Hot dip galvanized coatings

实施日期：2006-05-31

NF E25-041-2004

Fasteners - Hot dip galvanized coatings.

ASTM B556-1990(2007)

用抽查试验法测量薄镀铬层厚度的导则

Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

实施日期：1990-02-23

BS 5341-7.3.1-1992

Verbrennungsmotoren. Kolbenringe. Trapezringe Piston Rings up to 200 mm Diameter for Reciprocating Internal Combustion Engines Part 7:Designs,Dimensions and Designations for Single Piece Rings Section 7.3:Keystone and Half Keystone Compression Rings Subsection 7.3.1:Specification for Keystone Rings (ISO 6624-1:1986) (E) Moteurs a combustion interne. Segments de piston. Segments trapezoi daux

实施日期：1992-01-01

DIN EN ISO 6581-2010

铝及铝合金阳极氧化 着色阳极氧化膜耐紫外光和热相对牢度的测定

Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2010); German version EN ISO 6581:2010

实施日期：2010-12-01

BS 3592-1-1986

软管增强用钢丝.第1部分:橡胶软管增强用圆和扁的镀层钢丝规范

Steel Wire for Rubber Hose Reinforcement Part 1:Coated Round and Flat Steel Wire for Rubber Hose Reinforcement

适用范围：Requirements for round and flat low carbon (mild steel) wire, including carbon steel round wires of 2 mm diameter and larger.

实施日期：1986-01-01

DIN EN ISO 2082-2009

金属及其他无机涂层 铁或钢上带有辅助处理的镉电镀层

Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel

适用范围：This International Standard specifies the requirements of electroplated coatings of cadmium withsupplementary treatments on iron and steel. It includes information that is to be supplied by the purchas...

实施日期：2009-06-01

BS G 235-1987

Umwickelte elektrische Kabel mit versilberten Leitern fuer Schaltungen in der Zelle oder zwischen Geraeten (bis 150°C) Electric Cables for General Airframe or Equipment Interconnect Use (150 Degrees Celsius) Wrapped Insulation with Silver Plated Conductors Cables electriques. isolation enroulee (150°C). ames recouvertes d'une couche d'argent,pour usage general et pour elements de raccordement. Specifications

实施日期：1987-01-01

GB/T 16921-1997

金属覆盖层 厚度测量X射线光谱方法

实施日期：1998-02-01

BS M 40-1972

Methods for measuring coating thickness by non-destructive testing