DIN EN ISO 3677-1995

软钎焊和硬钎焊用的填充金属.符号的规定

Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992); German version EN ISO 3677:1995

GB/T 6417.1-2005

金属熔化焊接头缺欠分类及说明

Classification and explanation of imperfections in fusion welded joints

适用范围：本部分规定了熔化焊接头中焊接缺欠的分类和说明。 　　本部分适用于熔焊接头中的各类焊接缺欠。本部分不适用于其他缺欠(如冶金缺欠)。

发布日期：2005-08-10  实施日期：2006-04-01

DIN 7601-1998

带球形套筒的管螺纹连接.全螺纹连接和总览

Compression couplings with ball-type nipples - Complete unions and survey

适用范围：The document applies for complete compression couplings with ball-type nipples and stud ends according to DIN 3852-1. It gives a survey on types and dimensions of couplings, which are assembled from st...

EN 14324-2004

Brazing. Guidance on the application of brazed joints

实施日期：2004-09-01

GB 5109-1985

射吸式焊炬

Injection-type torches for welding

DIN EN ISO 14175-2008

焊接耗材 熔焊及相关工艺用气体和混合气体

Welding consumables - Gases and gas mixtures for fusion welding and allied processes

适用范围：This International Standard specifies requirements for the classification of gases and gas mixtures used infusion welding and allied processes including, but not limited to:-- tungsten arc welding (Pr...

实施日期：2008-06-01

GB 9621.5-1988

电子器件用金铜及金镍钎焊料的分析方法 原子吸收分光光度法测定锌

实施日期：1989-02-01

ISO 9455-8-1991

软钎焊剂 试验方法 第8部分:锌含量测定

Soft soldering fluxes -- Test methods -- Part 8: Determination of zinc content

适用范围：Describes the principle, the reagents and materials, the apparatus, the test procedure, the calculation of results, the precision and the contents of the test report.

发布日期：1991-12-01  实施日期：1991-12-01

GB 9619.2-1988

电子器件用纯银钎焊料的分析方法 原子吸收分光光度法测定镁和锌

实施日期：1989-02-01

DIN EN 12799-2000

钎焊.铜焊接口的无损检测

Brazing - Non-destructive examination of brazed joints; German version EN 12799:2000

适用范围：The document describes non-destructive test procedures and test piece types necessary to perform the test on brazed joints.

ISO 18279-2003

钎焊 钎焊接头的缺陷

Brazing -- Imperfections in brazed joints

适用范围：ISO 18279:2003 details a classification of imperfections that can occur in brazing joints. In addition guidance is provided on quality levels and suggested limits for imperfections are detailed. For re...

发布日期：2003-12-01  实施日期：2003-12-01

GB/T 10046-2000

银钎料

Silver filler metals for brazing

实施日期：2000-09-01

GB 4907.1-1985

电子器件用金、银及其合金钎焊料检验方法 清洁性检验方法

实施日期：1985-10-01

GB 4906-1985

电子器件用金、银及其合金钎焊料

实施日期：1985-10-01

DIN EN ISO 4063-2011

Welding and allied processes. Nomenclature of processes and reference numbers (ISO 4063:2009,Corrected version 2010-03-01); Trilingual version EN ISO 4063:2010

DIN EN 14324-2004

硬钎焊 硬钎焊接头的应用导则

Brazing - Guidance on the application of brazed joints

适用范围：To give guidance on the application of brazing. To give an introduction to brazing and a basis for the understanding and use of brazing in different applications.

NF A89-420/A1-2004

Brazing - Destructive tests of brazed joints.

BS 4N 100-1-1999

Aircraft oxygen systems and equipment Part 1:Design and installation AMD 15951:October,2005

实施日期：1999-10-15

GB 9619.3-1988

电子器件用纯银钎焊料的分析方法 原子吸收分光光度法测定镉

实施日期：1989-02-01

EN 62137-1-2-2007

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test